• There are no items in your cart

ASTM F 912 : 2011 : R2017

Current
Current

The latest, up-to-date edition.

Standard Specification for Alloy Steel Socket Set Screws
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-12-2017

CONTAINED IN VOL. 01.09, 2018 Defines the requirements for quenched and tempered alloy steel socket-set screws (SSS) 0.060 through 2.000 in. sizes having hardnesses 45 to 53 HRC.

1.1This specification covers the requirements for quenched and tempered alloy steel socket-set screws (SSS) in nominal diameters 0.060 through 2 in. having hardnesses 45 to 53 HRC.

1.2These set screws are intended for compression applications only and are not customarily subjected to embrittlement tests. For tensile applications, consult with the manufacturer for proper alloy and hardness.

1.3The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

Note 1:A complete metric companion to Specification F912 has been developed—F912M; therefore, no metric equivalents are shown in this Specification.

1.4The hazard statement pertains only to the test method section, Section 11 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
F 16
DocumentType
Standard
Pages
4
ProductNote
Reconfirmed 2017
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM F 1510 : 2021 Standard Specification for Rotary Positive Displacement Pumps, Ships Use
ASTM F 1718 : 2001 : R2019 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM F 2798 : 2009 : R2023 Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications

ASTM F 1470 : 2012 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F 2328 : 2005 : R2011 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
ASTM F 606/F606M : 2019 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM F 1470 : 2002 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F 606/F606M : 2016 : REDLINE Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM F 1470 : 2009 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM E 384 : 2022 Standard Test Method for Microindentation Hardness of Materials
ASTM F 788 : 2013-04 SPECIFICATION FOR SURFACE DISCONTINUITIES OF BOLTS, SCREWS, AND STUDS, INCH AND METRIC SERIES
ASTM E 384 : 2017 : REDLINE Standard Test Method for Microindentation Hardness of Materials
ASTM E 3 : 2011 : R2017 Standard Guide for Preparation of Metallographic Specimens
ASTM E 384 : 2011 Standard Test Method for Knoop and Vickers Hardness of Materials
ASTM A 751 : 2021 Standard Test Methods and Practices for Chemical Analysis of Steel Products
ASTM F 2328 : 2017 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
ASTM F 2328 : 2004 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
ASTM F 2328 : 2014 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
ASTM F 2328 : 2017 : REDLINE Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
ASTM A 751 : 2020 Standard Test Methods and Practices for Chemical Analysis of Steel Products
ASTM F 1470 : 2018 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASME B18.3 : 2012 SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES)
ASTM F 2328 : 2005 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
ASTM F 1470 : 2001 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASME B18.24 : 2015 PART IDENTIFYING NUMBER (PIN) CODE SYSTEM STANDARD FOR B18 FASTENER PRODUCTS
ASTM F 1470 : 2019 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F 1470 : 2024 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM E 384 : 2017 Standard Test Method for Microindentation Hardness of Materials
ASTM F 2328 : 2017 : R2022 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
ASTM E 112 : 2013 : R2021 Standard Test Methods for Determining Average Grain Size
ASTM E 112 : 2013 Standard Test Methods for Determining Average Grain Size
ASTM F 606/F606M : 2021 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM F 788 : 2020 Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series

View more information
US$55.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.