DIN 4034-2:2013-05
|
PREFABRICATED CONCRETE MANHOLES, UNREINFORCED, STEEL FIBRE AND REINFORCED - PART 2: MANHOLES FOR WELL CONSTRUCTION AND DRAIN CONSTRUCTION
|
PD ISO/TS 20656-1:2017
|
Plastics piping systems. General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes Buried pipes
|
UNE-CEN/TR 1295-3:2011 IN
|
Structural design of buried pipelines under various conditions of loading - Part 3: Common method
|
CEN/TR 1295-2:2005
|
Structural design of buried pipelines under various conditions of loading - Part 2: Summary of nationally established methods of design
|
CEN/TR 1295-3:2007
|
Structural design of buried pipelines under various conditions of loading - Part 3: Common method
|
VDI 6022 Blatt 1.2:2014-06
|
Ventilation and indoor-air quality - Hygiene requirements for ventilation and air-conditioning systems and units - Requirements for underground components (VDI Ventilation Code of Practice)
|
DIN 19537-1:1983-10
|
PIPES AND FITTINGS OF HIGH DENSITY POLYETHYLENE (HDPE) FOR DRAINAGE AND SEWERAGE - DIMENSIONS
|
DIN 16917-1 E : 2015
|
PIPES AND FITTINGS MADE OF THERMOPLASTIC MATERIALS WITH PROFILED WALL AND SMOOTH PIPE INSIDE - LARGE PIPES OVER DN 1200 FOR UNDERGROUND INSTALLATION - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
|
DIN 19565-1:1989-03
|
PIPES AN FITTINGS OF GLASS FIBRE REINFORCED PLASTICS (UP-GF) FOR BURIED SEWERS AND DRAINS - CENTRIFUGAL CASTED, FILLED - DIMENSIONS, TECHNICAL TERMS OF DELIVERY
|
UNE 53994:2012
|
Plastics. Thermoplastics and thermoplastic reinforced with steel strip pipes and fittings for drainage for drainage in building and civil engineering and agricultural drainage
|
DIN 16876:2000-11
|
PIPES AND FITTINGS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR DUCTING - DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS
|
S.R. CEN/TR 1295-3:2007
|
STRUCTURAL DESIGN OF BURIED PIPELINES UNDER VARIOUS CONDITIONS OF LOADING - PART 3: COMMON METHOD
|
DIN V 4034-1:2004-08
|
PREFABRICATED CONCRETE MANHOLES, UNREINFORCED, STEEL FIBRE AND REINFORCED FOR DRAINS AND SEWERS - TYPE 1 AND TYPE 2 - PART 1: REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY
|
DIN 16869-1:2014-12
|
CENTRIFUGALLY CAST FILLED GLASS FIBRE REINFORCED UNSATURATED POLYESTER RESIN (UP-GF) PIPES - PART 1: DIMENSIONS
|
DIN 4281:1998-08
|
CONCRETE FOR PREFABRICATED SEWAGE UNITS - MANUFACTURE, REQUIREMENTS, TESTING AND QUALITY CONTROL
|
DIN 16961-2:2010-03
|
THERMOPLASTICS PIPES AND FITTINGS WITH PROFILED WALL AND SMOOTH PIPE INSIDE - PART 2: TECHNICAL DELIVERY SPECIFICATIONS
|
DIN 16917-1:2015-10
|
PIPES AND FITTINGS MADE OF THERMOPLASTIC MATERIALS WITH PROFILED WALL AND SMOOTH PIPE INSIDE - LARGE PIPES OVER DN 1200 FOR UNDERGROUND INSTALLATION - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
|
PD CEN/TR 1295-2:2005
|
Structural design of buried pipelines under various conditions of loading Summary of nationally established methods of design
|
ISO/TS 20656-1:2017
|
Plastics piping systems — General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes — Part 1: Buried pipes
|
EN 858-1:2002/A1:2004
|
SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
|
DIN 19537-2:1988-01
|
PIPES AND FITTINGS OF HIGH DENSITY POLYETHYLENE (PE-HD) FOR DRAINAGE AND SEWERAGE - TECHNICAL SPECIFICATIONS FOR DELIVERY
|
BS EN 858-1:2002
|
Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control
|