AWS A5.4 : 92(R2000)

Name: AWS A5.4 : 92(R2000)
Brand: AWS

Superseded

View Superseded by

STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING, SPECIFICATION FOR

Superseded date

07-23-2013

Published date

01-12-2013

Publisher

American Welding Society

Personnel
Foreword
1 Scope
Part A - General requirements
2 Classification
3 Acceptance
4 Certification
5 Units of measure and rounding-off procedure
Part B - Tests, procedures, and requirements
6 Summary of tests
7 Retest
8 Weld test assemblies
9 Chemical analysis
10 Tension test
11 Fillet weld test
Part C - Manufacture, identification and packaging
12 Method of manufacture
13 Standard sizes and lengths
14 Core wire and covering
15 Exposed core
16 Electrode identification
17 Packaging
18 Marking of packages
Appendix - Guide to AWS specification for stainless
           steel electrodes for shielded metal arc
           welding
A1 Introduction
A2 Classification system
A3 Acceptance
A4 Certification
A5 Ventilation during welding
A6 Ferrite in weld deposits
A7 Description and intended use of filler metals
A8 Classification as to useability
A9 Special tests
A10 Safety considerations
AWS filler metal related documents
Tables
1 Chemical composition requirements for undiluted
     weld metal
2 Types of welding current and position of welding
3 Required tests
4 Welding conditions for preparation of the groove
     weld
5 All-weld-metal mechanical property requirements
6 Standard sizes and lengths
Figures
1 Pad for chemical analysis of undiluted weld metal
2 Groove weld test assembly for tension test specimen
3 Fillet weld test assembly
4 Fillet weld test specimen
A1 Weld pad for ferrite test
A2 Optional welding fixture for welding ferrite test
     pads
A3 WRC-1988 (FN) diagram for stainless steel weld
     metal
A4 Espy precent ferrite diagram for stainless weld
     metal
A5 DeLong (FN) diagram for stainless steel weld metal
A6 Orientation and location of impact specimen

92 VERSION CONTAINED IN ASME PV CODE 2C AS SFA-5.4 Prescribes requirements for the classification of covered stainless steel electrodes for shielded metal arc welding. These electrodes deposit a chromium content of not less than 10.5% and the the iron content exceeds that of any other element. For classification purposes, the iron content shall be derived as the balance element when all other elements are thought to be at their minimum specified values.

DevelopmentNote	Supersedes SAE AMS 5681, SAE AMS 5827 & SAE AMS 5695 Supersedes SAE AMS 5783 (06/2001)
DocumentType	Standard
PublisherName	American Welding Society
Status	Superseded
SupersededBy	AWS A5.4/A5.4M : 2006 AWS A5.4/A5.4M : 2012
Supersedes	SAE AMS 5783 : 2001 SAE AMS 5681 : 1996 SAE AMS 5695 : 2000 SAE AMS 5827 : 2000

Standards	Relationship
SAE AMS 5827 : 2000	Similar to

MIL STD 248 : D	WELDING AND BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION
AWS PASS : 1999	PROFESSIONAL'S ADVISOR ON WELDING OF STAINLESS STEEL
AWS GWF : 1998	GUIDE FOR SETTING UP A WELDER TRAINING FACILITY
AWWA C223 : 2013	FABRICATED STEEL AND STAINLESS STEEL-TAPPING SLEEVES
ASTM A 708 : 1979	Practice for Detection of Susceptibility to Intergranular Corrosion in Severely Sensitized Austenitic Stainless Steel (Withdrawn 1988)
MIL-STD-278 Revision F:1987	WELDING AND CASTING STANDARD
SAE AMS 5827 : 2000	STEEL, CORROSION RESISTANT, COVERED WELDING ELECTRODES, 16.4Cr 4.8Ni 0.22 Cb 3.6Cu
AWS F1.3 : 1999	A SAMPLING STRATEGY GUIDE FOR EVALUATING CONTAMINANTS IN THE WELDING ENVIRONMENT
AWS PRGWM : 1999	PRACTICAL REFERENCE GUIDE TO WELDING METALLURGY: KEY CONCEPTS FOR WELDABILITY
AWWA C516 : 2014	LARGE-DIAMETER RUBBER-SEATED BUTTERFLY VALVES, SIZES 78 IN. (2,000 MM) AND LARGER
DIN EN ISO 15011-4:2009-07	HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 4: FUME DATA SHEETS
NACE RP 01 99 : 2004	INSTALLATION OF STAINLESS CHROMIUM-NICKEL STEEL AND NICKEL-ALLOY ROLL-BONDED AND EXPLOSION-BONDED CLAD PLATE IN AIR POLLUTION CONTROL EQUIPMENT
SAE AMS 5797E : 2002(S2018)	COBALT ALLOY, CORROSION AND HEAT-RESISTANT, COVERED WELDING ELECTRODES, 51.5CO - 20CR - 10NI - 15W
ISO 15011-4:2017	Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 4: Fume data sheets
I.S. EN ISO 15011-4:2018	HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 4: FUME DATA SHEETS (ISO 15011-4:2017)
NASA SPEC 5004A : 2003	WELDING OF AEROSPACE GROUND SUPPORT EQUIPMENT AND RELATED NONCONVENTIONAL FACILITIES
AISC N690L : 2003	LOAD AND RESISTANCE FACTOR DESIGN OF SAFETY-RELATED STEEL STRUCTURES FOR NUCLEAR FACILITIES
MIL H 24653 : 0	HASP, HIGH SECURITY, SHROUDED FOR SHIPBOARD DOORS AND HATCHES USING HIGH AND MEDIUM SECURITY PADLOCK
UNI EN ISO 15011-4 : 2009	HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 4: FUME DATA SHEETS
SAE AMS 5795G : 1993(S2017)	IRON ALLOY, CORROSION AND HEAT RESISTANT, COVERED, WELDING ELECTRODES, 31FE - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0(CB + TA)
AWS EG4.0 : 1996	GUIDE FOR THE TRAINING AND QUALIFICATION OF WELDING PERSONNEL: LEVEL 3, EXPERT WELDER
AWS D1.6 : 1999 ERRATA 1999	STRUCTURAL WELDING CODE - STAINLESS STEEL
ASTM A 774/A774M : 2014 : REDLINE	Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
AWWA C507 : 2015	BALL VALVES, 6 IN. THROUGH 60 IN. (150 MM THROUGH 1,500 MM)
AWS D14.2 : 1993	SPECIFICATION FOR METAL CUTTING MACHINE TOOL WELDMENTS
AWS B1.11 : 2000	GUIDE FOR THE VISUAL EXAMINATION OF WELDS
AWS A5.9 : 93(R1999)	BARE STAINLESS STEEL WELDING ELECTRODES AND RODS, SPECIFICATION FOR
EN ISO 15011-4:2018	Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets (ISO 15011-4:2017)
ASME B31.5 : 2016	REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS

ASME PV CODE 8 DIV 2 : 2017	BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES
ASTM A 262 : 2015 : REDLINE	Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASME PV CODE 8 DIV 1 : 2017	BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
ANSI Z136.1 : 2014	SAFE USE OF LASERS
ASTM E 353 : 2014 : REDLINE	Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
AWS A5.01 : 93(R1999)	FILLER METAL PROCUREMENT GUIDELINES
ASTM G 4 : 2001	Standard Guide for Conducting Corrosion Tests in Field Applications
ANSI Z87.1 : 2015	OCCUPATIONAL AND EDUCATIONAL PERSONAL EYE AND FACE PROTECTION DEVICES
ASTM A 515/A515M : 2017 : REDLINE	Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
AWS B4.0:2016	STANDARD METHODS FOR MECHANICAL TESTING OF WELDS
AWS A4.2M/A4.2 : 1997	STANDARD PROCEDURE FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE DELTA FERRITE CONTENT OF AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC STAINLESS WELD METAL
ASTM A 285/A285M : 2017 : REDLINE	Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
AWS F2.1 : 1978	ELECTRON BEAM WELDING AND CUTTING, RECOMMENDED SAFE PRACTICES FOR,

View more information

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

AWS A5.4 : 92(R2000)

STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING, SPECIFICATION FOR

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory