AWWA C151/A21.51 : 2017
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
06-01-2017
Foreword
I Introduction
II Special Issues
III Use of This Standard
IV Major Revisions
V Comments
Standard
1 General
2 References
3 Definitions
4 Requirements
5 Verification
6 Delivery
Appendix
A - Pipe Thickness Required for Different Tap Sizes
Specifies 3-in. through 64-in. (80-mm through 1,600-mm) ductile-iron pipe, centrifugally cast, for potable water, raw water, wastewater, and reclaimed water systems with push-on joints or mechanical joints.
DevelopmentNote |
Supersedes WW P 401 (07/2004)
|
DocumentType |
Standard
|
ISBN |
9781625762191
|
Pages |
60
|
PublisherName |
American Water Works Association
|
Status |
Current
|
Supersedes |
AWWA C502 : 2014 | DRY-BARREL FIRE HYDRANTS |
FM 1610 : 2016 | DUCTILE IRON PIPE AND FITTINGS, FLEXIBLE FITTINGS AND COUPLINGS |
ASTM A 377 : 2003 | Standard Index of Specifications for Ductile-Iron Pressure Pipe |
AWWA C503 : 2014 | WET-BARREL FIRE HYDRANTS |
ASTM A 377 : 2003 : R2008 : EDT 1 | Standard Index of Specifications for Ductile-Iron Pressure Pipe |
ASTM F 1476 : 2007 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
ICC 2009 INT. RESI.CODE & COMM.-I1 : 2009 | 2009 INTERNATIONAL RESIDENTIAL CODE & COMMENTARY - VOLUME 2: CHAPTERS 12 TO 44 |
UNI CEN ISO/TS 24817 : 2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
AWWA C111/A21.11 : 2017 | RUBBER-GASKET JOINTS FOR DUCTILE-IRON PRESSURE PIPE AND FITTINGS |
ASCE/CI 36 15 : 2015 | STANDARD DESIGN AND CONSTRUCTION GUIDELINES FOR MICROTUNNELING |
ASTM F 1548 : 2001 | Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
ASTM A 716 : 2008 | Standard Specification for Ductile Iron Culvert Pipe |
ASTM F 1548 : 2001 : R2012 | Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
ISO/TS 24817:2006 | Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection |
ASME B31.1 : 2016 | POWER PIPING |
ASME PCC 2 : 2015 | REPAIR OF PRESSURE EQUIPMENT AND PIPING |
ASME B31.3:2016 | PROCESS PIPING |
AWWA C606 : 2015 | GROOVED AND SHOULDERED JOINTS |
ISO 24817:2017 | Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection |
NFPA 14 : 2016 | INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
ASTM A 716 : 2008 : R2014 | Standard Specification for Ductile Iron Culvert Pipe |
BS EN ISO 24817:2017 | Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
ASTM F 1548 : 2001 : R2006 | Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 | IRC® Code and Commentary, Volume 2 |
ICC IMC Code and Commentary : 2015 | IMC® Code and Commentary |
ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
DD CEN ISO/TS 24817:2011 | Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
ANSI/AWWA C115/A21.15 : 2011 | FLANGED DUCTILE-IRON PIPE WITH DUCTILE-IRON OR GRAY-IRON THREADED FLANGES |
AWWA M41 : 3 | DUCTILE-IRON PIPE AND FITTINGS |
14/30256269 DC : 0 | BS EN ISO 24817 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
DD ISO/TS 24817 : 2006 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
CSA B242 : 2005 | GROOVE- AND SHOULDER-TYPE MECHANICAL PIPE COUPLINGS |
ASTM F 1476 : 2007 : R2013 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
ASCE 36 01 : 2001 | STANDARD CONSTRUCTION GUIDELINES FOR MICROTUNNELING |
ASTM A 377 : 2003 : R2014 | Standard Index of Specifications for Ductile-Iron Pressure Pipe |
API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
MSS SP 67 : 2017 | BUTTERFLY VALVES |
AWWA C150/A21.50 : 2014 | THICKNESS DESIGN OF DUCTILE-IRON PIPE |
CSA B242 : 2005 : R2016 | GROOVE- AND SHOULDER-TYPE MECHANICAL PIPE COUPLINGS |
ASTM B 1000 : 2015 | Standard Practices for Casting Preparation and Test Procedure of Porcelain Enamel-lined Pipe, Fittings, and Valves for Use in the Municipal Wastewater, Sewage, and Water Treatment Industry |
S.R. CEN ISO TS 24817:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
CEN ISO/TS 24817:2011 | Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006) |
ICC 2012 INTERNATIONAL MECH. CODE : 2012 | INTERNATIONAL MECHANICAL CODE |
ASTM D 3282 : 2015 : REDLINE | Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes |
NSF 61 : 2016 | DRINKING WATER SYSTEM COMPONENTS - HEALTH EFFECTS |
AWWA C104/A21.4 : 2016 | CEMENT - MORTAR LINING FOR DUCTILE-IRON PIPE AND FITTINGS EFFECTIVE |
AWWA C600 : 2010 | INSTALLATION OF DUCTILE-IRON MAINS AND THEIR APPURTENANCES |
AWWA C150/A21.50 : 2014 | THICKNESS DESIGN OF DUCTILE-IRON PIPE |
AWWA C111/A21.11 : 2017 | RUBBER-GASKET JOINTS FOR DUCTILE-IRON PRESSURE PIPE AND FITTINGS |
ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
AASHTO T 99 : 2015 | METHOD OF TEST FOR MOISTURE-DENSITY RELATIONS OF SOILS USING A 2.5-KG (5.5-LB) RAMMER AND A 305-MM (12-IN.) DROP |
AWWA C800 : 2014 | UNDERGROUND SERVICE LINE VALVES AND FITTINGS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.