Name: BIS IS 2911-1-1 : 2010
Brand: BIS

DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 1: CONCRETE PILES - SECTION 1: DRIVEN CAST IN-SITU CONCRETE PILES

Published date

01-12-2013

Publisher

Bureau of Indian Standards

FOREWORD
1. SCOPE
2. REFERENCES
3. TERMINOLOGY
4. NECESSARY INFORMATION
5. EQUIPMENTS AND ACCESSORIES
6. DESIGN CONSIDERATIONS
7. MATERIALS AND STRESSES
8. WORKMANSHIP
ANNEX A - LIST OF REFERRED INDIAN STANDARDS
ANNEX B - LOAD-CARRYING CAPACITY OF PILES - STATIC
ANALYSIS
ANNEX C - ANALYSIS OF LATERALLY LOADED PILES
ANNEX D - DATA SHEET
ANNEX E - COMMITTEE COMPOSITION

Specifies the design and construction of driven cast in-situ concrete piles which transmit the load to the soil by resistance developed either at the pile tip by end bearing or along the surface of the shaft by friction or by both.

Committee	CED 43
DocumentType	Standard
PublisherName	Bureau of Indian Standards
Status	Current

BIS IS 2911-4 : 2013

DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 4: LOAD TEST ON PILES

BIS IS 1893-1 : 2016	CRITERIA FOR EARTHQUAKE RESISTANT DESIGN OF STRUCTURES - PART 1: GENERAL PROVISIONS AND BUILDINGS
BIS IS 1489-2 : 2015	PORTLAND POZZOLANA CEMENT - SPECIFICATION - PART 2: CALCINED CLAY BASED
BIS IS 12330 : 1988(R2005)	SPECIFICATION FOR SULPHATE RESISTING PORTLAND CEMENT
BIS IS 1892 : 1979(R2002)	CODE OF PRACTICE FOR SUBSURFACE INVESTIGATIONS FOR FOUNDATIONS
BIS IS 2911-4 : 2013	DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 4: LOAD TEST ON PILES
BIS IS 432-1 : 1982(R2015)	SPECIFICATION FOR MILD STEEL AND MEDIUM TENSILE STEEL BARS AND HARD-DRAWN STEEL WIRE FOR CONCRETE REINFORCEMENT - PART 1: MILD STEEL AND MEDIUM TENSILE STEEL BARS
BIS IS 8041 : 1990(R2005)	SPECIFICATION FOR RAPID HARDENING PORTLAND CEMENT
BIS IS 269 : 2015	ORDINARY PORTLAND CEMENT - SPECIFICATION
BIS IS 6403 : 1981(R2002)	CODE OF PRACTICE FOR DETERMINATION OF BEARING CAPACITY OF SHALLOW FOUNDATIONS
BIS IS 456 : 2000(R2016)	PLAIN AND REINFORCED CONCRETE CODE - OF PRACTICE
BIS IS 2974-1 : 1982(R1998)	CODE OF PRACTICE FOR DESIGN AND CONSTRUCTION OF MACHINE FOUNDATIONS - PART 1: FOUNDATION FOR RECIPROCATING TYPE MACHINES
BIS IS 2911-3 : 1980 AMD 4 2014	CODE OF PRACTICE FOR DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - PART 3: UNDER-REAMED PILES
BIS IS 4968-2 : 1976(R2002)	METHOD FOR SUBSURFACE SOUNDING FOR SOILS - PART 2: DYNAMIC METHOD USING CONE AND BENTONITE SLURRY
BIS IS 8043 : 1991(R2005)	SPECIFICATION FOR HYDROPHOBIC PORTLAND CEMENT
BIS IS 1489-1 : 2015	PORTLAND POZZOLANA CEMENT - SPECIFICATION - PART 1: FLY ASH BASED
BIS IS 12600 : 1989(R2009)	SPECIFICATION FOR LOW HEAT PORTLAND CEMENT
BIS IS 4968-3 : 1976(R2002)	METHOD FOR SUBSURFACE SOUNDING FOR SOILS - PART 3: STATIC CONE PENETRATION TEST
BIS IS 12269 : 2013	ORDINARY PORTLAND CEMENT, 53 GRADE - SPECIFICATION
BIS IS 8112 : 2013	ORDINARY PORTLAND CEMENT, 43 GRADE - SPECIFICATION
BIS IS 4968-1 : 1976(R2002)	METHOD FOR SUBSURFACE SOUNDING FOR SOILS - PART 1: DYNAMIC METHOD USING 50 MM CONE WITHOUT BETONITE SLURRY
BIS IS 2062 : 2011(R2016)	HOT ROLLED MEDIUM AND HIGH TENSILE STRUCTURAL STEEL - SPECIFICATION
BIS IS 2131 : 1981(R2002)	METHOD FOR STANDARD PENETRATION TEST FOR SOILS
BIS IS 455 : 2015	PORTLAND SLAG CEMENT - SPECIFICATION
BIS IS 1786 : 2008 AMD 3 2017	HIGH STRENGTH DEFORMED STEEL BARS AND WIRES FOR CONCRETE REINFORCEMENT - SPECIFICATION