• There are no items in your cart

BS 5534(2003) : 2003

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES)
Available format(s)

Hardcopy , PDF

Superseded date

08-31-2014

Language(s)

English

Published date

01-01-2003

Committees responsible
Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Materials, fittings and accessories
5 Design criteria
6 Application and installation details
Annex A (normative) - Reinforced bitumen underlays
Annex B (normative) - Design and installation of pitched
        roof systems where insulation is placed at rafter
        line
Annex C (normative) - Permissible characteristics and
        defects for grading timber battens and
        counter-battens
Annex D (normative) - Preservative treatment for timber
        battens
Annex E (normative) - Determination of batten sizes by
        calculation
Annex F (informative) - Examples of structural design
        calculations for tiling battens
Annex G (normative) - Method of test and calculation for
        wind uplift resistance of mechanical fasteners for
        single-lap tiles
Annex H (normative) - Method of test and calculation for
        wind uplift resistance of nail hook fixings for
        double-lap slates
Annex I (informative) - Worked examples of wind uplift and
        fixing calculations
Annex J (normative) - Method of test for determination of
        tensile adhesion strength of bedding mortars
Annex K (normative) - Values of uplift pressure reduction
        factor, R
Annex L (normative) - Method of test for air permeability
        of unsealed small element roofing assemblies
Bibliography

Specifies recommendations for the design, materials, application, installation and performance of slates, tiles, shingles and shakes and their associated fittings and accessories used in the construction of pitched roofs and vertical cladding applications.

Committee
B/542/1
DevelopmentNote
To be read in conjunction with BS 8000-6(1990). Supersedes BS 5534-1(1997) & 02/105033 DC. (07/2003) 2003 Edition Re-Issued in February 2010 & incorporates AMD 1 2010. Supersedes 09/30208303 DC. (02/2010)
DocumentType
Standard
Pages
142
PublisherName
British Standards Institution
Status
Superseded
Supersedes

13/30274184 DC : 0 BS 5918 - SOLAR HEATING SYSTEMS FOR DOMESTIC HOT WATER - CODE OF PRACTICE
S.R. 50-2:2012 BUILDING SERVICES CODE OF PRACTICE - PART 2: THERMAL SOLAR SYSTEMS
13/30268792 DC : 0 BS 8000-6 - WORKMANSHIP ON BUILDING SITES - PART 6: CODE OF PRACTICE FOR SLATING ANDTILING OF ROOFS AND CLADDINGS
07/30150793 DC : 0 BS 5440-1 - FUELING AND VENTILATION FOR GAS APPLIANCES OF RATED INPUT NOT EXCEEDING 70 KW NET (1ST, 2ND AND 3RD FAMILY GASES) - PART 1: SPECIFICATION FOR INSTALLATION OF GAS APPLIANCES TO CHIMNEYS AND FOR MAINTENANCE OF CHIMNEYS
BS 8747:2007 Reinforced bitumen membranes (RBMs) for roofing. Guide to selection and specification
08/30140202 DC : 0 BS 8103-3 - STRUCTURAL DESIGN OF LOW-RISE BUILDINGS - PART 3: CODE OF PRACTICE FOR TIMBER FLOORS AND ROOFS FOR HOUSING
BS 5250:2002 Code of practice for control of condensation in buildings
12/30177610 DC : 0 BS 5918 - SOLAR HEATING SYSTEMS FOR DOMESTIC HOT WATER - CODE OF PRACTICE
BS 5268-3:2006 STRUCTURAL USE OF TIMBER - PART 3: CODE OF PRACTICE FOR TRUSSED RAFTER ROOFS
BS 5440-1:2008 Flueing and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases) Specification for installation of gas appliances to chimneys and for maintenance of chimneys
BS 8103-3:2009 Structural design of low-rise buildings Code of practice for timber floors and roofs for housing
BS 8000-6:2013 Workmanship on building sites Code of practice for slating and tiling of roofs and claddings
BS EN 1991-1-4 NA : 2005 UK NATIONAL ANNEX TO EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS
11/30171810 DC : DRAFT APR 2011 BS 5250 - CODE OF PRACTICE FOR CONTROL OF CONDENSATION IN BUILDINGS
BS 5250(2011) : 2011 CODE OF PRACTICE FOR CONTROL OF CONDENSATION IN BUILDINGS

BS 1202-3:1974 Specification for nails Aluminium nails
BS 1202-2:1974 Specification for nails Copper nails
PREN 13501-5 : DRAFT 2015 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 5: CLASSIFICATION USING DATA FROM EXTERNAL FIRE EXPOSURE TO ROOFS TESTS
BS EN 12878:2014 Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test
BS EN 607:2004 Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing
BS EN 10230-1:2000 Steel wire nails Loose nails for general applications
BS EN 14437:2004 Determination of the uplift resistance of clay or concrete tiles for roofing. Roof system test method
BS EN 13139:2013 Aggregates for mortar
BS EN 988:1997 Zinc and zinc alloys. Specification for rolled flat products for building
BS 4576-1:1970 Unplasticized polyvinyl chloride (PVC-U) rainwater goods and accessories Half-round gutters and circular pipe
BS EN 622-3:2004 Fibreboards. Specifications Requirements for medium boards
BS EN 10048:1997 Hot rolled narrow steel strip. Tolerances on dimensions and shape
BS 8417:2003 Preservation of timber. Recommendations
BS 2000-58(2007) : 2007 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD
BS 1199 & 1200(1976) : 1976 AMD 5126 SPECIFICATIONS FOR BUILDING SANDS FROM NATURAL SOURCES
BS EN 544:2011 Bitumen shingles with mineral and/or synthetic reinforcements. Product specification and test methods
89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
BS 8104:1992 Code of practice for assessing exposure of walls to wind-driven rain
BS EN 507:2000 Roofing products from metal sheet. Specification for fully supported roofing products of aluminium sheet
BS EN 10095:1999 Heat resisting steels and nickel alloys
BS EN 517:2006 Prefabricated accessories for roofing. Roof safety hooks
BS 7916:1998 Code of practice for the selection and application of particleboard, oriented strand board (OSB), cement bonded particleboard and wood fibreboards for specific purposes
BS EN 485-4:1994 Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on shape and dimensions for cold-rolled products
BS 3177:1959 Method for determining the permeability to water vapour of flexible sheet materials used for packaging
BS EN 312-7:1997 Particleboards. Specifications Requirements for heavy-duty load-bearing boards for use in humid conditions
BS EN 10051:2010 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape
BS EN 12588:2006 Lead and lead alloys. Rolled lead sheet for building purposes
BS EN ISO 14001:2015 Environmental management systems. Requirements with guidance for use
PREN 12326-1 : DRAFT 2014 SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 1: SPECIFICATIONS FOR SLATE AND CARBONATE SLATE
BS 680-2:1971 Specification for roofing slates Metric units
BS 7543:1992 Guide to durability of buildings and building elements, products and components
BS EN 197-1:2011 Cement Composition, specifications and conformity criteria for common cements
BS EN 12056-3:2000 Gravity drainage systems inside buildings Roof drainage, layout and calculation
BS 476-6(1989) : 1989 FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 6: METHOD OF TEST FOR FIRE PROPAGATION FOR PRODUCTS
BS EN 12326-2:2011 Slate and stone for discontinuous roofing and external cladding Methods of test for slate and carbonate slate
BS EN 13501-1 : 2007 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
BS EN 300:2006 Oriented strand boards (OSB). Definitions, classification and specifications
BS EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods
BS 2000-49(2007) : 2007 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
BS EN 612:2005 Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet
BS EN 516:2006 Prefabricated accessories for roofing. Installations for roof access. Walkways, treads and steps
BS EN 1427:2015 Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method
BS 3690-2:1989 Bitumens for building and civil engineering Specification for bitumens for industrial purposes
BS EN ISO 6946:1997 Building components and building elements. Thermal resistance and thermal transmittance. Calculation method
BS EN 1426:2015 Bitumen and bituminous binders. Determination of needle penetration
BS EN 504:2000 Roofing products from metal sheet. Specification for fully supported roofing products of copper sheet
BS EN 501:1994 Roofing products from metal sheet. Specifications for fully supported roofing products of zinc sheet
BS EN 491:2011 Concrete roofing tiles and fittings for roof covering and wall cladding. Test methods
BS EN 335-1:2006 Durabiltity of wood and wood-based products. Definitions of use classes General
BS 4978:1996 Specification for visual strength grading of softwood
BS EN 490 : 2011 CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - PRODUCT SPECIFICATIONS
BS EN 1304:2013 Clay roofing tiles and fittings. Product definitions and specifications
BS EN 634-2:2007 Cement-bonded particleboards. Specifications Requirements for OPC bonded particleboards for use in dry, humid and external conditions
BS EN 350-2:1994 Durability of wood and wood-based products. Natural durability of solid wood Guide to natural durability and treatability of selected wood species of importance in Europe
BS EN 485-2:2013 Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties
BS EN 13823 : 2010 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
BS 6100-1.3.2:1989 Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works Roofs and roofing
BS EN 492 : 2012 FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
BS EN 13556:2003 Round and sawn timber. Nomenclature of timbers used in Europe
BS 416-1:1990 Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron Specification for spigot and socket systems
PD 6484:1979 Commentary on corrosion at bimetallic contacts and its alleviation
BS EN 599-1 : 2009 DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - EFFICACY OF PREVENTIVE WOOD PRESERVATIVES AS DETERMINED BY BIOLOGICAL TESTS - PART 1: SPECIFICATION ACCORDING TO USE CLASS
BS EN 312-5:1997 Particleboards. Specifications Requirements for load-bearing boards for use in humid conditions
BS EN ISO 7500-1:2015 Metallic materials — Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
BS EN 485-1 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
BS 4887-1:1986 Mortar admixtures Specification for air-entraining (plasticizing) admixtures
BS EN 1172:2011 Copper and copper alloys. Sheet and strip for building purposes
BS EN 10258:1997 Cold-rolled stainless steel narrow strip and cut lengths. Tolerances on dimensions and shape
BS 5707:1997 Specification for preparations of wood preservatives in organic solvents
BS 8000-6:1990 Workmanship on building sites Code of practice for slating and tiling of roofs and claddings
BS 5427-1:1996 Code of practice for the use of profiled sheet for roof and wall cladding on buildings Design
BS EN 12524:2000 Building materials and products. Hygrothermal properties. Tabulated design values
BS EN 539-2:2013 Clay roofing tiles for discontinuous laying. Determination of physicalcharacteristics Test for frost resistance

View more information
US$402.48
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.