BS 903-A54:1989
|
Physical testing of rubber Methods for exposure to artificial light, for use in determining resistance to weathering
|
BS 2782-5.553A(1991) : 1991 AMD 10600
|
METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - DETERMINATION OF LIGHT ABSORPTION OF CELLULOSE ACETATE, BEFORE AND AFTER FURTHER HEATING
|
BS 903-A53:1989
|
Physical testing of rubber Methods for exposure to natural weathering, for use in determining resistance to weathering
|
BS 2782-5 Method 550A:1981
|
Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to natural weathering
|
ISO 1600:1990
|
Plastics Cellulose acetate Determination of light absorption on moulded specimens produced using different periods of heating
|
ISO 4892:1981
|
Plastics Methods of exposure to laboratory light sources
|
IEC 60068-2-11:1981
|
Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist
|
ISO 105-B01:2014
|
Textiles Tests for colour fastness Part B01: Colour fastness to light: Daylight
|
ISO 4665-3:1987
|
Rubber, vulcanized Resistance to weathering Part 3: Methods of exposure to artificial light
|
BS 2782-5:Method 540B:1982
|
Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to laboratory light sources, (xenon arc lamp, enclosed carbon arc lamp, open-flame carbon arc lamp, fluorescent tube lamps)
|
ISO 4665-2:1985
|
Rubber, vulcanized Resistance to weathering Part 2: Methods of exposure to natural weathering
|
BS 4778-3.2:1991
|
Quality vocabulary. Availability, reliability and maintainability terms Glossary of international terms - 3.2 glossay of international terms
|
ISO 3474:1976
|
Unplasticized polyvinyl chloride (PVC) pipes — Specification and measurement of opacity
|
ISO 489:1999
|
Plastics Determination of refractive index
|
BS 4778-2:1991
|
Quality vocabulary Quality concepts and related definitions
|
BS 2782-5.542A(1979) : AMD 10684
|
METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - QUALITATIVE EVALUATION OF BLEEDING COLOURANTS
|
BS 7825-1:1995
|
Calibration of rubber and plastics test equipment Specification for principles and general requirements
|
IEC 60068-2-3:1969
|
Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state
|
BS 2782-5:Method 531A:1992
|
Methods of testing plastics. Optical and colour properties, weathering Determination of refractive index of transparent plastics
|
BS 4778-3.1:1991
|
Quality vocabulary. Availability, reliability and maintainability terms Guide to concepts and related definitions
|
ISO 183:1976
|
Plastics Qualitative evaluation of the bleeding of colorants
|
ISO 4611:2010
|
Plastics Determination of the effects of exposure to damp heat, water spray and salt mist
|
ISO Guide 30:2015
|
Reference materials Selected terms and definitions
|
BS EN 578:1994
|
Plastics piping systems. Plastics pipes and fittings. Determination of the opacity
|
PD 6461-1:1995
|
General metrology Basic and general terms (VIM)
|
ISO 4582:2017
|
Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
|
BS 2782-5 Method 540A:1977
|
Methods of testing plastics. Optical and colour properties, weathering Determination of resistance to change upon exposure under glass to daylight
|
BS 7825-2:1996
|
Calibration of rubber and plastics test equipment Calibration procedures
|
ISO 877:1994
|
Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
|
ISO 9227:2017
|
Corrosion tests in artificial atmospheres — Salt spray tests
|
ASTM G 63 : 2015 : REDLINE
|
Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
|
ISO 105-A02:1993
|
Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour
|
BS 2782-5 Method 552A:1981
|
Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light
|
BS EN 30012-1:1994
|
Quality assurance requirements for measuring equipment. Metrological confirmation system for measuring equipment
|
ISO 4607:1978
|
Plastics Methods of exposure to natural weathering
|
BS 5233:1986
|
Glossary of terms used in metrology (incorporating BS 2643)
|
IEC 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
|