BS 8500-2(2015) : 2015
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
01-01-2015
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Complementary requirements for constituent materials
5 Complementary basic requirements for concrete
6 Designated concrete
7 Designed concrete
8 Prescribed concrete
9 Standardized prescribed concrete
10 Proprietary concrete
11 Delivery of fresh concrete
12 Conformity testing and conformity criteria
13 Production control
14 Transport of concrete
Annexes
Annex A (normative) - Conformity procedure for
combinations
Annex B (normative) - Minimizing the risk of damaging
alkali-silica reaction in concrete
Annex C (informative) - Example of the conformity
procedure given in Annex A
Annex D (informative) - BS 8500 provisions linked to
BS EN 206 requirements
Bibliography
Defines constituent materials and concrete.
Committee |
B/517/1
|
DevelopmentNote |
Supersedes BS 8500-2(2006) & 14/30291598 DC. (05/2015) 2015 Edition remains current. Supersedes 15/30334432 DC. 2015 Edition Re-Issued in May 2016 & incorporates AMD 1 2016. (06/2016)
|
DocumentType |
Standard
|
Pages |
50
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
14/30291596 DC : 0 | BS 8500-1 - CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 1: METHOD OF SPECIFYING AND GUIDANCE FOR THE SPECIFIER |
BS EN 1992-1-1 NA : 2004 | UK NATIONAL ANNEX TO EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
BS 1722-14:2017 | Fences Specification for open mesh steel panel |
BS 8500-1(2015) : 2015 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 1: METHOD OF SPECIFYING AND GUIDANCE FOR THE SPECIFIER |
BS 8004:2015 | Code of practice for foundations |
BS 8297:2017 | Design, manufacture and installation of architectural precast concrete cladding. Code of practice |
BS 8002:2015 | Code of practice for earth retaining structures |
17/30341308 DC : DRAFT JUNE 2017 | BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL |
BS PAS 8810(2016) : 2016 | TUNNEL DESIGN - DESIGN OF CONCRETE SEGMENTAL TUNNEL LININGS - CODE OF PRACTICE |
15/30330848 DC : 0 | BS 7979 - SPECIFICATION FOR LIMESTONE FINES FOR USE WITH PORTLAND CEMENT |
17/30342957 DC : 0 | BS 8297 - DESIGN, MANUFACTURE AND INSTALLATION OF ARCHITECTURAL PRECAST CONCRETE CLADDING - CODE OF PRACTICE |
BS 8081:2015 | CODE OF PRACTICE FOR GROUTED ANCHORS |
BS PAS 8820(2016) : 2016 | CONSTRUCTION MATERIALS - ALKALI-ACTIVATED CEMENTITIOUS MATERIAL AND CONCRETE - SPECIFICATION |
BS 7979:2016 | Specification for limestone fines for use with Portland cement |
16/30325063 DC : 0 | BS 1722-12 - FENCES - PART 12: STEEL PALISADE FENCES - MANUFACTURING AND INSTALLATION - SPECIFICATION |
BS EN 14889-1:2006 | Fibres for concrete Steel fibres. Definitions, specifications and conformity |
BS EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test |
BS EN 480-1:2014 | Admixtures for concrete, mortar and grout. Test methods Reference concrete and reference mortar for testing |
BS EN 14889-2:2006 | Fibres for concrete Polymer fibres. Definitions, specifications and conformity |
BS EN 480-11:2005 | Admixtures for concrete, mortar and grout. Test methods Determination of air void characteristics in hardened concrete |
BS EN 12350-6:2009 | Testing fresh concrete Density |
BS 812-104:1994 | Testing aggregates Method for qualitative and quantitative petrographic examination of aggregates |
BS EN 196-2:2013 | Method of testing cement Chemical analysis of cement |
ISO/IEC 17021:2011 | Conformity assessment Requirements for bodies providing audit and certification of management systems |
BS EN 933-11:2009 | Tests for geometrical properties of aggregates Classification test for the constituents of coarse recycled aggregate |
BS EN ISO 9001:2015 | Quality management systems. Requirements |
BS EN 13055-1:2002 | Lightweight aggregates Lightweight aggregates for concrete, mortar and grout |
BS EN 12390-7:2009 | Testing hardened concrete Density of hardened concrete |
BS EN 15167-1:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout Definitions, specifications and conformity criteria |
BS 6068-2.42:1993 | Water quality. Physical, chemical and biochemical methods Determination of sodium and potassium: determination of sodium by atomic absorption spectrometry |
BS EN ISO/IEC 17021:2011 | Conformity assessment. Requirements for bodies providing audit and certification of management systems |
BS EN 1008:2002 | Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
BS EN 12390-3:2009 | Testing hardened concrete Compressive strength of test specimens |
BS 1704:1985 | Specification for solid-stem general purpose thermometers |
BS 8000-2.1:1990 | Workmanship on building sites. Code of practice for concrete work Mixing and transporting concrete |
BS EN 206 : 2013 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
BS EN 13286-51:2004 | Unbound and hydraulically bound mixtures Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction |
BS EN 1097-3:1998 | Tests for mechanical and physical properties of aggregates Determination of loose bulk density and voids |
BS EN 450-1:2012 | Fly ash for concrete Definition, specifications and conformity criteria |
BS EN 12620:2013 | Aggregates for concrete |
BS EN 480-12:2005 | Admixtures for concrete, mortar and grout. Test methods Determination of the alkali content of admixtures |
BS 6068-2.43:1993 | Water quality. Physical, chemical and biochemical methods Determination of sodium and potassium: determination of potassium by atomic absorption spectrometry |
BS EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates Determination of particle density and water absorption |
BS EN 197-1:2011 | Cement Composition, specifications and conformity criteria for common cements |
BS EN 14216:2015 | Cement. Composition, specifications and conformity criteria for very low heat special cements |
BS 6068-2.44:1993 | Water quality. Physical, chemical and biochemical methods Determination of sodium and potassium: determination of sodium and potassium by flame emission spectrometry |
BS 1881-129:2011 | Testing concrete Method for determination of density of partially compacted semi-dry fresh concrete |
BS EN 1744-1 : 2009 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
BS EN 45011:1998 | General requirements for bodies operating product certification systems |
BS EN 196-7:2007 | Methods of testing cement Methods of taking and preparing samples of cement |
BS EN 934-2 : 2009 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 2: CONCRETE ADMIXTURES - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
BS EN 13263-1 : 2005 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
BS 7943:1999 | Guide to the interpretation of petrographical examinations for alkali-silica reactivity |
BS 1881-124:1988 | Testing concrete Methods for analysis of hardened concrete |
BS EN 196-1:2016 | Methods of testing cement Determination of strength |
BS EN 12350-5:2000 | Testing fresh concrete Flow table test |
BS EN 12390-2:2009 | Testing hardened concrete Making and curing specimens for strength tests |
BS EN 480-10:2009 | Admixtures for concrete, mortar and grout. Test methods Determination of water soluble chloride content |
BS 812-123:1999 | Testing aggregates Method for determination of alkali-silica reactivity. Concrete prism method |
BS EN 196-21:1992 | Methods of testing cement Determination of the chloride, carbon dioxide and alkali content of cement |
BS 6068-2.37:1990 | Water quality. Physical, chemical and biochemical methods Method for the determination of chloride via a silver nitrate titration with chromate indicator (Mohr\'s method) |
BS 7979:2001 | Specification for limestone fines for use with Portland cement |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.