• There are no items in your cart

BS CP312-1(1973) : 1973

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

CODE OF PRACTICE FOR PLASTICS PIPEWORK (THERMOPLASTICS MATERIAL) - GENERAL PRINCIPLES AND CHOICE OF MATERIAL
Withdrawn date

01-01-2009

Published date

11-23-2012

Code Drafting Committee
Foreword
1. General
1.1 Scope
2. Definitions
3. Materials available
4. Hydraulic characteristics
5. Handling and storage
6. Thermal effects
7. Environment
8. Long-term behaviour under hydraulic pressure
9. Inspection
10. Installation
11. Jointing methods
12. Bending
13. Connections
14. Identification
15. Laying buried pipes
15.1 General principles
15.2 Trench preparation
15.3 Bedding and sidefilling
15.4 Backfilling
15.5 Pipelaying without trenches
16. Testing
17. Limitations
18. Pipes for water
18.1 General
18.2 PVC
18.3 Polyethylene
18.4 Polypropylene
18.5 ABS
19. Pipes for soil, waste, rainwater and trade
      effluents (above ground)
20. Pipes for gases
20.1 Gaseous fuels
20.2 Industrial gases
21. Pipes for food and drink other than water
22. Pipes for general industrial applications
      (excluding gases)
Appendix
A. Tests for suitability of soil material (imported
      or local) for surrounding buried plastics pipes
Tables
1. Physical properties of plastics pipe materials
2a. Chemical resistance of unplasticized PVC, low-
      density and high-density polytheylene
2b. Chemical resistance of modified (high impact) PVC,
      ABS, nylon and polypropylene

Describes the selection of thermoplastics pipe systems for particular applications and with the general principles applicable to all such systems. The use of plastics pipes in services supplied from the mains of water undertakings is governed by the byelaws of the undertakings and these shall be strictly observed. Although pipes of polyethylene are not easily fractured by freezing, the flow of water may be stopped, and therefore precautions should be taken as for pipes of other materials. Covers definitions, materials available, hydraulic characteristics, handling and storage, thermal effects, environment, long-term behaviour under hydraulic pressure and more.

Committee
PRI/88
DocumentType
Standard
PublisherName
British Standards Institution
Status
Withdrawn

BS 4576-1:1970 Unplasticized polyvinyl chloride (PVC-U) rainwater goods and accessories Half-round gutters and circular pipe
05/30113497 DC : DRAFT APR 2005 BS 5391-1 - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) FITTINGS FOR USE WITH ABS PRESSURE PIPE - PART 1: SPECIFICATION FOR FITTINGS FOR USE WITH PIPE FOR INDUSTRIAL USES
BS CP312-2(1973) : 1973 AMD 2337 CODE OF PRACTICE FOR PLASTICS PIPEWORK (THERMOPLASTICS MATERIAL) - UNPLASTICIZED PVC PIPEWORK FOR THE CONVEYANCE OF LIQUIDS UNDER PRESSURE
BS 6572:1985 Specification for blue polyethylene pipes up to nominal size 63 for below ground use for potable water
BS 7281:1990 Specification for polyethylene pipes for the supply of gaseous fuels
BS 4346-3:1982 Joints and fittings for use with unplasticized PVC pressure pipes Specification for solvent cement
BS 5306-2:1990 Fire extinguishing installations and equipment on premises Specification for sprinkler systems
BS 5970:1992 Code of practice for thermal insulation of pipework and equipment (in the temperature range -100°C to +870°C)
BS 4576-1:1989 Unplasticized polyvinyl chloride (PVC-U) rainwater goods and accessories Half-round gutters and pipes of circular cross-section
BS 4346-2:1970 Joints and fittings for use with unplasticized PVC pressure pipes Mechanical joints and fittings, principally of unplasticized PVC
BS 3867:1987 Method of specifying outside diameters and pressure ratings for pipe of thermoplastics materials (inch series)
BS 6700:1997 Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages
BS 6700(2006) : 2006 DESIGN, INSTALLATION, TESTING AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - SPECIFICATION
ESI 12-24 : ISSUE 1 AMD 2 PLASTIC DUCTS FOR BURIED ELECTRIC CABLES
BS 6880-2:1988 Code of practice for low temperature hot water heating systems of output greater than 45 kW Selection of equipment
BS 4346-1:1969 Joints and fittings for use with unplasticized PVC pressure pipes Injection moulded unplasticized PVC fittings for solvent welding for use with pressure pipes, including potable water supply
BS 5955-6:1980 Plastics pipework (thermoplastics materials) Code of practice for the installation of unplasticized PVC pipework for gravity drains and sewers
BS 4660(1989) : 1989 SPECIFICATION FOR UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PIPES AND PLASTICS FITTINGS OF NOMINAL SIZES 110 AND 160 FOR BELOW GROUND GRAVITY DRAINAGE AND SEWERAGE
BS 6700:1987 Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages
BS 8005-1:1987 Sewerage Guide to new sewerage construction
BS 3351:1971 Specification for piping systems for petroleum refineries and petrochemical plants
BS 6785:1986 Code of practice for solar heating systems for swimming pools
BS CP312-3(1973) : 1973 CODE OF PRACTICE FOR PLASTICS PIPEWORK (THERMOPLASTICS MATERIAL) - POLYETHYLENE PIPES FOR THE CONVEYANCE OF LIQUIDS UNDER PRESSURE
BS 7336:1990 Specification for polyethylene fusion fittings with integral heating element(s) for use with polyethylene pipes for the conveyance of gaseous fuels
BS 5481:1977 Specification for unplasticized PVC pipe and fittings for gravity sewers
BS 6730:1986 Specification for black polyethylene pipes up to nominal size 63 for above ground use for cold potable water
BS 8081:1989 Code of practice for ground anchorages

BS 3867:1965 Specifications for dimensions of pipes of plastic materials (outside diameters)
BS 3284:1967 Specification for polythene pipe (Type 50) for cold water services
BS 4577:1970 Specification for materials for resistance welding electrodes and ancillary equipment
BS 2474:1965 Recommended names for chemicals used in industry
BS CP99(1972) : LATEST FROST PRECAUTIONS FOR WATER SERVICES
BS 4159(1967) : LATEST COLOUR MARKING OF PLASTIC PIPES TO INDICATE PRESSURE RATINGS
BS CP2010-1(1966) : AMD 1589 CODE OF PRACTICE FOR PIPELINES - INSTALLATION OF PIPELINES IN LAND
BS 3168(1959) : LATEST RIGID PVC EXTRUSION AND MOULDING COMPOUNDS
BS CP304(1968) : LATEST SANITARY PIPEWORK ABOVE GROUND
BS 4660:1973 Specification for unplasticized PVC underground drain pipe and fittings
BS 4346-1:1969 Joints and fittings for use with unplasticized PVC pressure pipes Injection moulded unplasticized PVC fittings for solvent welding for use with pressure pipes, including potable water supply
BS CP331-1(1973) : LATEST CODE OF PRACTICE FOR INSTALLATION OF PIPES AND METERS FOR TOWN GAS - SERVICE PIPES
BS 4514:1969 Specification for unplasticized PVC soil and ventilating pipes, fittings and accessories
BS 3796(1970) : LATEST POLYTHENE PIPE (TYPE 50) FOR GENERAL PURPOSES INCLUDING CHEMICAL AND FOOD INDUSTRY USES
BS 4346-3(1969) : LATEST
BS 310:1958 Blackheart malleable iron castings
BS 864-3:1975 Capillary and compression tube fittings of copper and copper alloy Compression fittings for polyethylene pipes

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.