BS EN 10048:1997
Current
The latest, up-to-date edition.
Hot rolled narrow steel strip. Tolerances on dimensions and shape
Hardcopy , PDF
English
05-15-1997
1 Scope
2 Normative references
3 Definitions
4 Forms and condition of delivery
4.1 Forms of delivery
4.2 Conditions of delivery
5 Information to be supplied by the purchaser
6 Designation
7 Tolerances on dimensions
7.1 Thickness and tolerances on crown
7.2 Tolerances on width
7.3 Tolerances on cut length
8 Tolerances on shape
8.1 Straightness of edges (edgewise bow)
8.2 Form of coils
8.3 Tolerances on squareness
9 Measurements
9.1 Thickness
9.2 Width
9.3 Straightness of edges
10 Packing
11 Options
Annexes
A (informative) List of corresponding national designations,
standards or specifications for categories B, C and D of
table 4
B (informative) List of national standards corresponding to
the EURONORMS referred to (see clause 2)
Applicable to uncoated hot rolled narrow steel strip less than 600 mm in width made from specified steel grades. Not applicable to hot rolled wide strip and narrow strip (more than 600 mm wide) achieved by slitting hot rolled wide strip.
| Committee |
ISE/109
|
| DevelopmentNote |
Supersedes BS 1449-1.12(1991), BS 1501-3(1990) and 92/37577 DC. (07/2005) Reviewed and confirmed by BSI, October 2005. (10/2005) Together with BS EN 10051, BS EN 10029, BS EN 10088-2 and BS EN 10095, supersedes BS 1449-2(1983). (02/2008)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN 10048 : 1ED 1996 | Identical |
| I.S. EN 10048:1997 | Identical |
| SN EN 10048 : 1997 | Identical |
| NF EN 10048 : 1996 | Identical |
| UNE-EN 10048:1997 | Identical |
| NBN EN 10048 : 1996 | Identical |
| EN 10048:1996 | Identical |
| NEN EN 10048 : 1997 | Identical |
| UNI EN 10048 : 1998 | Identical |
| 03/300415 DC : DRAFT JAN 2003 | BS XXXX - MECHANICAL DESIGN AND POWER REQUIREMENTS FOR TROUGHED BELT CONVEYORS |
| 13/30271503 DC : 0 | BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| 15/30270868 DC : DRAFT FEB 2015 | BS 6635 - MANUFACTURE OF SADDLE TREES MADE FROM WOOD - SPECIFICATION |
| BS 8612:2018 | Dry fixed ridge, hip, and verge systems for slating and tiling. Specification |
| DEFSTAN 02-900(PT3)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| BS 6635:2015 | Manufacture of saddle trees made from wood. Specification |
| BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| BS 6635:2003 | Manufacture of saddle trees made from wood. Specification |
| DEFSTAN 95-24/2(2002) : 2002 | ARMOUR PLATE, STEEL (3-160 MM) |
| DEFSTAN 02-128/2(2008) : 2008 | FURNITURE AND ASSOCIATED EQUIPMENT REQUIREMENTS FOR HM SHIPS |
| DEFSTAN 02-900(PT3)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| BS 1501-3:1990 | Steels for pressure purposes Specification for corrosion- and heat-resisting steels: plates, sheet and strip |
| BS 1449-2:1983 | Steel plate, sheet and strip Specification for stainless and heat-resisting steel plate, sheet and strip |
| DEFSTAN 02-329/3(2010) : 2010 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-320/4(2015) : 2015 | REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-121(PT1)/4(2017) : 2017 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES (CATEGORY 2) - PART 1: COMMON REQUIREMENTS |
| DEFSTAN 02-121(PT1)/3(2010) : 2010 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS |
| 17/30324405 DC : 0 | BS 8612 - DRY-FIXED RIDGE, HIP, AND VERGE SYSTEMS FOR SLATING AND TILING - SPECIFICATION |
| BS 5534(2003) : 2003 | CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
| DEFSTAN 02-900(PT0)/3(2014) : 2014 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
| DEFSTAN 02-329/4(2015) : 2015 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-320/3(2009) : 2009 | REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-320/2(2002) : INTERIM | REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-121(PT1)/2(2006) : 2006 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS |
| 02/105033 DC : DRAFT AUG 2002 | BS 5534 - CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
| DEFSTAN 02-329/2(2005) : 2005 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
| BS 493(1995) : 1995 | SPECIFICATION FOR AIRBRICKS AND GRATINGS FOR WALL VENTILATION |
| EN 10113-2 : 1993 | HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED STEELS |
| EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| EN 10079:2007 | Definition of steel products |
| EN 10028-3:2017 | Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
| EN 10137-3 : 1995 | PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - DELIVERY CONDITIONS FOR PRECIPITATION HARDENED STEELS |
| EURONORM 89 : 1971 | ALLOY STEELS FOR HOT-FORMED HEAT-TREATABLE SPRINGS; QUALITY SPECIFICATIONS |
| EN 10028-6:2017 | Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered |
| EN 10149-2:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels |
| EURONORM 132 : 1979 | COLD ROLLED STEEL STRIPS FOR SPRINGS; TECHNICAL TERMS OF DELIVERY |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| EURONORM 96 : 1979 | TOOL STEELS - TECHNICAL TERMS OF DELIVERY |
| EURONORM 86 : 1970 | STEELS FOR FLAME-HARDENING AND INDUCTION-HARDENING - QUALITY SPECIFICATIONS |
| EN 10137-2 : 1995 | PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - DELIVERY CONDITIONS FOR QUENCHED AND TEMPERED STEELS |
| EN 10207:2017 | Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars |
| EN 10155 : 1993 | STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE - TECHNICAL DELIVERY CONDITIONS |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| EN 10083-3:2006/AC:2008 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| EN 10149-3:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels |
| EURONORM 85 : 1970 | NITRIDING STEELS; QUALITY SPECIFICATIONS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.