BS EN 10051:2010
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
12-31-2010
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Form of supply
6 Tolerances for sheet/plate
7 Tolerances for wide strip and strip split from wide strip
8 Measurement
Annex A (informative) - Standards with steel grades for this
dimensional standard
Annex B (normative) - Options
Defines tolerances on dimensions and shape for continuously hot-rolled uncoated plate/sheet and strip with a maximum width of 2200 mm of non-alloy and alloy steels.
This European Standard specifies tolerances on dimensions and shape for continuously hot-rolled uncoated plate/sheet and strip with a maximum width of 2 200 mm of non-alloy and alloy steels in accordance with Table 1 (see also Annex A). This European Standard also applies to hot-rolled strip for cold rolling. Table 1 Field of application Product Thickness
mm Steel grades according to:
(but not limited to) wide strip (width: 600 mm ≤ w ≤ 2 200 mm),Sheet/Plate cut from wide strip,strip w < 600 mm slit from wide strip ≤ 25 mm EN 10025-2 to -6,EN 10028-2 to -6,EN 10083-2 and -3,EN 10084, EN 10085,EN 10111,EN 10120, EN 10149-2 and -3,EN 10207,prEN 10338,EN ISO 4957. This European Standard does not apply to stainless steels and not to hot-rolled strip rolled in widths w < 600 mm (see EN 10048).
Committee |
ISE/103
|
DevelopmentNote |
Supersedes 89/42223 DC and 95/713700 DC. (08/2004) Supersedes BS 1449-1.6(1991) and BS 1501-3(1990). (07/2005) Together with BS EN 10029, BS EN 10048, BS EN 10088-2 and BS EN 10095, supersedes BS 1449-2(1983). (02/2008) Supersedes 09/30200092 DC. (12/2010)
|
DocumentType |
Standard
|
Pages |
20
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NEN EN 10051 : 2010 | Identical |
EN 10051:2010 | Identical |
UNI EN 10051 : 2011 | Identical |
NF EN 10051 : 2011 | Identical |
UNE-EN 10051:2012 | Identical |
SN EN 10051 : 2011 | Identical |
I.S. EN 10051:2010 | Identical |
NBN EN 10051 : 2011 | Identical |
NS EN 10051 : 2010 | Identical |
03/300415 DC : DRAFT JAN 2003 | BS XXXX - MECHANICAL DESIGN AND POWER REQUIREMENTS FOR TROUGHED BELT CONVEYORS |
15/30270868 DC : DRAFT FEB 2015 | BS 6635 - MANUFACTURE OF SADDLE TREES MADE FROM WOOD - SPECIFICATION |
BS 8612:2018 | Dry fixed ridge, hip, and verge systems for slating and tiling. Specification |
DEFSTAN 02-900(PT3)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
BS 8499:2017 | Specification for domestic gas meter boxes and meter bracket |
BS 6635:2015 | Manufacture of saddle trees made from wood. Specification |
BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
BS 6635:2003 | Manufacture of saddle trees made from wood. Specification |
BS 1722-12:1999 | Fences Specification for steel palisade fences |
BS 1722-12:2006 | Fences Specification for steel palisade fences |
17/30324405 DC : 0 | BS 8612 - DRY-FIXED RIDGE, HIP, AND VERGE SYSTEMS FOR SLATING AND TILING - SPECIFICATION |
DEFSTAN 95-24/2(2002) : 2002 | ARMOUR PLATE, STEEL (3-160 MM) |
BS 5534(2003) : 2003 | CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
BS 8499:2009 | Specification for domestic gas meter boxes and meter bracket |
DEFSTAN 02-128/2(2008) : 2008 | FURNITURE AND ASSOCIATED EQUIPMENT REQUIREMENTS FOR HM SHIPS |
DEFSTAN 02-900(PT3)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
BS 7608(2014) : 2014 | GUIDE TO FATIGUE DESIGN AND ASSESSMENT OF STEEL PRODUCTS |
BS 1501-3:1990 | Steels for pressure purposes Specification for corrosion- and heat-resisting steels: plates, sheet and strip |
BS 5950-2:2001 | STRUCTURAL USE OF STEELWORK IN BUILDING - PART 2: SPECIFICATION FOR MATERIALS, FABRICATION AND ERECTION - ROLLED AND WELDED SECTIONS |
BS 6779-1:1998 | Highway parapets for bridges and other structures Specification for vehicle containment parapets of metal construction |
DEFSTAN 02-329/3(2010) : 2010 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-320/4(2015) : 2015 | REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-121(PT1)/4(2017) : 2017 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES (CATEGORY 2) - PART 1: COMMON REQUIREMENTS |
DEFSTAN 02-121(PT1)/3(2010) : 2010 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS |
13/30102062 DC : 0 | BS 7608:2013 - GUIDE TO FATIGUE DESIGN AND ASSESSMENT OF STEEL PRODUCTS |
DEFSTAN 02-900(PT0)/3(2014) : 2014 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
DEFSTAN 02-329/4(2015) : 2015 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-320/3(2009) : 2009 | REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-320/2(2002) : INTERIM | REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-121(PT1)/2(2006) : 2006 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS |
13/30271503 DC : 0 | BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
02/105033 DC : DRAFT AUG 2002 | BS 5534 - CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
09/30160438 DC : DRAFT JAN 2009 | BS 8499 - SPECIFICATION FOR DOMESTIC GAS METER BOXES AND METER BRACKET |
DEFSTAN 02-329/2(2005) : 2005 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
BS 493(1995) : 1995 | SPECIFICATION FOR AIRBRICKS AND GRATINGS FOR WALL VENTILATION |
EN 10048:1996 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
EN 10079:2007 | Definition of steel products |
EN 10020:2000 | Definition and classification of grades of steel |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.