|
EN 10048:1996
|
Hot rolled narrow steel strip - Tolerances on dimensions and shape
|
|
EN 10051:2010
|
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
|
|
EN 10169-3:2003
|
Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
|
|
ENV 10169-2 : 1999
|
CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS
|
|
EN 10140:2006
|
Cold rolled narrow steel strip - Tolerances on dimensions and shape
|
|
EN 10079:2007
|
Definition of steel products
|
|
EN 10027-2:2015
|
DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
|
|
EN 13523-14:2014
|
Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
|
|
EN 10152:2017
|
Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
|
|
EN 13523-10:2017
|
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
|
|
EN 971-1 : 1996
|
PAINTS AND VARNISHES - TERMS AND DEFINITIONS FOR COATING MATERIALS - PART 1: GENERAL TERMS
|
|
EN ISO 1043-1:2011/A1:2016
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
|
|
EN 13523-6:2002
|
Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
|
|
EN 10268:2006+A1:2013
|
COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
|
|
EN 13523-0:2014
|
Coil coated metals - Test methods - Part 0: General introduction
|
|
EN 10111:2008
|
Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
|
|
EN 13523-3:2014
|
Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
|
|
EN 10025:1990/A1:1993
|
HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
|
|
EN ISO 7253 : 2001
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG)
|
|
EN 10139:2016
|
Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
|
|
EN 10131:2006 (edition 2)
|
Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
|
|
ENV 606 : DRAFT 1993
|
BAR CODED TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS
|
|
PREN 13523-12 : DRAFT 2015
|
COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING
|
|
EN 13523-21:2017
|
Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
|
|
ISO 7253:1996
|
Paints and varnishes — Determination of resistance to neutral salt spray (fog)
|
|
EN 10143:2006 (edition 2)
|
Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
|
|
EN 13523-22:2017
|
Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
|
|
EN 10021:2006
|
General technical delivery conditions for steel products
|
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
|
ISO 4997:2015
|
Cold-reduced carbon steel sheet of structural quality
|
|
EN 13523-5:2014
|
Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
|
|
EN 13523-8:2017
|
Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
|
|
EN 10130:2006
|
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
|
|
EN 10027-1:2016
|
Designation systems for steels - Part 1: Steel names
|
|
EN ISO 2815:2003
|
Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
|
|
EN 13523-7:2014
|
Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
|
|
EN 13523-1:2017
|
Coil coated metals - Test methods - Part 1: Film thickness
|
|
EN 10292:2007
|
Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions
|
|
EN 10020:2000
|
Definition and classification of grades of steel
|
|
EN 13523-4:2014
|
Coil coated metals - Test methods - Part 4: Pencil hardness
|
|
EN 13523-15:2015
|
Coil coated metals - Test methods - Part 15: Metamerism
|
|
EN 13523-2:2014
|
Coil coated metals - Test methods - Part 2: Gloss
|
|
ISO 1043-1:2011
|
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
|
|
CR 10260 : 1998
|
DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.