• There are no items in your cart

BS EN 10217-3:2002

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Welded steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes
Available format(s)

Hardcopy , PDF

Superseded date

05-14-2021

Language(s)

English

Published date

03-06-2006

Foreword
1 Scope
2 Normative References
3 Terms and definitions
4 Symbols
5 Classification and designation
   5.1 Classification
   5.2 Designation
6 Information to be supplied by the purchaser
   6.1 Mandatory information
   6.2 Options
   6.3 Example of an order
7 MANUFACTURING PROCESS
   7.1 Steelmaking process
   7.2 Deoxidation process
   7.3 Tube manufacture and delivery conditions
8 Requirements
   8.1 General
   8.2 Chemical composition
   8.3 Mechanical properties
   8.4 Appearance and internal soundness
   8.5 Straightness
   8.6 Preparation of ends
   8.7 Dimensions, masses and tolerances
9 Inspection
   9.1 Type of inspection
   9.2 Inspection documents
   9.3 Summary of inspection and testing
10 Sampling
   10.1 Frequency of tests
   10.2 Preparation of samples and test pieces
11 Test methods
   11.1 Chemical analysis
   11.2 Tensile test
   11.3 Flattening test
   11.4 Ring tensile test
   11.5 Drift expanding test
   11.6 Ring expanding test
   11.7 Weld bend test for SAW tubes
   11.8 Impact test
   11.9 Leak tightness test
   11.10 Dimensional inspection
   11.11 Visual examination
   11.12 Non-Destructive Testing
   11.13 Material identification
   11.14 Retests, sorting and reprocessing
12 Marking
   12.1 Marking to be applied
   12.2 Additional marking
13 Protection
Annex A (normative) Qualification of welding procedure for
        SAW tube production
Annex B (Normative) Elevated temperature properties for
        steel grades P275NL1 and NL2
Annex ZA (informative) Relationship between this European
         Standard and the Essential Requirements of 97/23/EC
Bibliography

Describes the technical delivery condition in two test categories for welded tubes of circular cross section, made of weldable alloy fine grain steel.

Modify the clause 9 Inspection and the Annex ZA in order to make them in line with the provision of Directive 97/23/EC (PED).

Committee
ISE/110
DevelopmentNote
Together with BS EN 10217-5, supersedes BS 3602-2(1991) Supersedes 97/700420 DC (07/2002) Supersedes 04/30098400 DC. (03/2006)
DocumentType
Standard
Pages
48
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

DEFSTAN 02-329/2(2005) : 2005 REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES
DEFSTAN 02-329/3(2010) : 2010 REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES
DEFSTAN 02-329/4(2015) : 2015 REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES
16/30353337 DC : 0 PD 5500:2015+A3 - SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
BS PD5500(2015) : 2015 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
BS PD5500(2009) : 2009 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
PD 5500:2003 Specification for unfired fusion welded pressure vessels
BS PD5500(2006) : 2006 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
BS PD5500(2018) : 2018 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
BS PD5500(2012) : 2012 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS

EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
EN 10246-17:2000 Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections
EN 10246-1:1996 Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
CR 10261 : 1995 ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS
EN 10234 : 1993 METALLIC MATERIALS - TUBE - DRIFT EXPANDING TEST
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN 10237 : 1993 METALLIC MATERIALS - TUBE - RING TENSILE TEST
EN 10002-5:1991 Metallic materials - Tensile testing - Part 5: Method of testing at elevated temperature
EN 1321:1996 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
EN 10246-6:1999 Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EN 10256:2000 Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel
EN ISO 2566-1:1999 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
EN 895:1995 Destructive tests on welds in metallic materials - Transverse tensile test
EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
EURONORM 103 : 1971 MICROSCOPIC DETERMINATION OF THE FERRITE OR AUSTENITIC GRAIN SIZE OF STEELS
EN 910 : 1996 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
EN 10236 : 1993 METALLIC MATERIALS - TUBE - RING EXPANDING TEST
EN 10246-7:2005 Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections
EN 10246-16:2000 Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections
EN 10021:2006 General technical delivery conditions for steel products
EN 10246-10:2000 Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
ISO 2566-1:1984 Steel Conversion of elongation values Part 1: Carbon and low alloy steels
EN 10233 : 1993 METALLIC MATERIALS - TUBE - FLATTENING TEST
EN 760:1996 Welding consumables - Fluxes for submerged arc welding - Classification
EN 10204:2004 Metallic products - Types of inspection documents
EN 10246-9:2000 Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
EN 10246-3:1999 Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
ENV 10220 : 1993 SEAMLESS AND WELDED STEEL TUBES - DIMENSIONS AND MASSES PER UNIT LENGTH
EN 10020:2000 Definition and classification of grades of steel
EN 10246-15:2000 Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections
EN 10246-14:1999 Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
EN 10246-8:1999 Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
CR 10260 : 1998 DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS
EN 10246-5 : 1999 NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: AUTOMATIC FULL PERIPHERAL MAGNETIC TRANSDUCER/FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS

View more information
US$313.84
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.