BS EN 10244-2:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Steel wire and wire products. Non-ferrous metallic coatings on steel wire Zinc or zinc alloy coatings
Available format(s)
Hardcopy , PDF
Superseded date
08-17-2023
Language(s)
English
Published date
05-31-2009
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Coating requirements
4.1 Requirements for the coatings material
4.2 Requirements relating to coating on the wire
4.2.1 Coating mass
4.2.2 Appearance of coating
4.2.3 Dipping test
4.2.4 Special finishes
4.2.5 Adherence of coating
5 Test conditions
5.1 Selection of samples
5.2 Determination of mass of coating
5.2.1 General
5.2.2 Gravimetric method
5.2.3 Gaseous volumetric method
5.3 Dipping test
5.3.1 Principle
5.3.2 Reagents
5.3.3 Preparation of test piece
5.3.4 Performing of the test
5.3.5 Interpretation of results
Bibliography
Describes the requirement for coating mass, other properties and testing of zinc and zinc alloy coatings on steel wire and steel wire products of circular or other section.
This part of this European Standard specifies the requirement for coating mass, other properties and testing of zinc and zinc alloy coatings on steel wire and steel wire products of circular or other section.
| Committee |
ISE/106
|
| DevelopmentNote |
Supersedes BS 443(1982). (05/2001) Supersedes 95/701542 DC. (10/2001) Supersedes 08/30180144 DC. (05/2009) Reviewed and confirmed by BSI, February 2014. (01/2014)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 10244-2 : 2009 | Identical |
| NF EN 10244-2 : 2009 | Identical |
| NS EN 10244-2 : 2009 | Identical |
| NEN EN 10244-2 : 2009 | Identical |
| SN EN 10244-2 : 2009 | Identical |
| UNI EN 10244-2 : 2009 | Identical |
| EN 10244-2:2009 | Identical |
| NBN EN 10244-2 : 2009 | Identical |
| I.S. EN 10244-2:2009 | Identical |
| UNE-EN 10244-2:2010 | Identical |
| DIN EN 10244-2:2009-08 | Identical |
| 07/30143023 DC : DRAFT MAR 2007 | BS 7835 - ELECTRIC CABLES - ARMOURED CABLES WITH THERMOSETTING INSULATION FOR RATED VOLTAGES FROM 3.8/6.6 KV TO 19/33 KV HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES WHEN AFFECTED BY FIRE - REQUIREMENTS AND TEST METHODS |
| 06/30140171 DC : DRAFT APR 2006 | BS 8481 - DESIGN, PREPARATION AND APPLICATION OF INTERNAL GYPSUM, CEMENT, CEMENT AND LIME PLASTERING SYSTEMS - SPECIFICATION |
| BS 1722-5(2006) : 2006 | FENCES - PART 5: SPECIFICATION FOR CLOSE-BOARDED FENCES AND WOODEN PALISADE FENCES |
| BS 7846:2015 | Electric cables. Thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1 000 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire. Specification |
| BS 1722-1:2006 | Fences Specification for chain link fences |
| BS 8002:2015 | Code of practice for earth retaining structures |
| BS 7846:2009 | Electric cables. Thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1000 V, having low emission of smoke and corrosive gases when affected by fire. Specification |
| BS 1722-17:2006 | Fences Specification for electric security fences. Design, installation and maintenance |
| DEFSTAN 22-94/1(2007) : 2007 | SPECIFICATION FOR THE MANUFACTURE OF REPLENISHMENT AT SEA HOSES AND HOSE ASSEMBLIES |
| DEFSTAN 03-32(PT4)/4(2005) : 2005 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
| DEFSTAN 22-94/3(2011) : 2011 | SPECIFICATION FOR THE REPLENISHMENT AT SEA HOSES AND HOSE ASSEMBLIES |
| DEFSTAN 02-703/2(2011) : 2011 | THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY |
| DEFSTAN 22-94/2(2008) : 2008 | SPECIFICATION FOR THE MANUFACTURE OF REPLENISHMENT AT SEA HOSES AND HOSE ASSEMBLIES |
| DEFSTAN 61-12(PT12)SEC3/2(2008) : 2008 | WIRES, CORDS AND CABLES - ELECTRICAL-METRIC UNITS - PART 12 SECTION 3: CABLES, TELEPHONE (FOR FIELD USE) |
| DEFSTAN 22-16/2(2006) : 2006 | SPECIFICATION FOR THE MANUFACTURE OF 64 MM BORE HOSE ASSEMBLY FOR ABEAM REPLENISHMENT AT SEA FOR USE WITH LUBRICATING OILS, DIESO FUEL AND AVCAT |
| DEFSTAN 03-32(PT4)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
| BS DD1722-18(2007) : 2007 | FENCES - PART 18: SPECIFICATION FOR STEEL MESH SITE PERIMETER TEMPORARY FENCING SYSTEMS |
| 15/30301501 DC : 0 | BS 5467 - ELECTRIC CABLES - THERMOSETTING INSULATED, ARMOURED CABLES FOR VOLTAGES OF 600/1000 V AND 1900/3300 V, FOR FIXED INSTALLATIONS - SPECIFICATION |
| 16/30338263 DC : 0 | BS 1722-17 - FENCES - PART 17: SPECIFICATION FOR ELECTRIC SECURITY FENCES - DESIGN, INSTALLATION AND MAINTENANCE |
| 06/30143016 DC : DRAFT SEP 2006 | BS 6622 - SPECIFICATION FOR CABLES WITH THERMOSETTING INSULATION FOR RATED VOLTAGES FROM 3.8/6.6 KV TO 19/33 KV |
| BS 8481:2006 | Design, preparation and application of internal gypsum, cement, cement and lime plastering systems. Specification |
| DEFSTAN 03-032(PT4)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
| BS 6622:2007 | Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV. Requirements and test methods |
| BS 3165:2009 | Rubber suction hose and hose assemblies with semi-embedded wire helix for fire-fighting purposes. Requirements and test methods |
| BS 6724(1997) : 1997 | ELECTRIC CABLES - THERMOSETTING INSULATED, ARMOURED CABLES FOR VOLTAGES OF 600/1000 V AND 1900/3300 V, HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES WHEN AFFECTED BY FIRE |
| BS 6622:1999 | Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV |
| BS 5467(1997) : 1997 | ELECTRIC CABLES - THERMOSETTING INSULATED, ARMOURED CABLES FOR VOLTAGES OF 600/1000 V AND 1900/3300 V |
| BS 7835:2007 | Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV having low emission of smoke and corrosive gases when affected by fire. Requirements and test methods |
| BS 4102:1998 | Specification for steel wire for general fencing purposes |
| PD 8010-2:2015+A1:2016 | Pipeline systems Subsea pipelines. Code of practice |
| BS 6724:2016 | Electric cables. Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire. Specification |
| BS PD8010-2(2015) : 2015 | PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
| 09/30203688 DC : 0 | BS 7861-2 - STRATA REINFORCEMENT SUPPORT SYSTEMS COMPONENTS USED IN COAL MINES - PART 2: SPECIFICATION FOR FLEXIBLE SYSTEMS FOR ROOF REINFORCEMENT |
| 15/30301742 DC : 0 | BS 7846 - ELECTRIC CABLES - THERMOSETTING INSULATED, ARMOURED, FIRE-RESISTANT CABLES OF RATED VOLTAGE 600/1000 V FOR FIXED INSTALLATIONS, HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES WHEN AFFECTED BY FIRE - REQUIREMENTS AND TEST METHODS |
| 14/30286899 DC : 0 | PD 8010-2 - PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
| BS 5467:2016 | Electric cables. Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations. Specification |
| BS PAS 47(2003) : 2003 | ELECTRIC SECURITY FENCES - DESIGN, INSTALLATION AND MAINTENANCE - SPECIFICATION |
| 06/30139509 DC : DRAFT MAY 2006 | BS 1722-10 - FENCES - PART 10: SPECIFICATION FOR ANTI-INTRUDER FENCES IN CHAIN LINK AND WELDED MESH |
| BS 6346:1997 | Electric cables. PVC insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V |
| BS 7870-2:2011 | LV and MV polymeric insulated cables for use by distribution and generation utilities Methods of test |
| 15/30301443 DC : 0 | BS 6724 - ELECTRIC CABLES - THERMOSETTING INSULATED, ARMOURED CABLES FOR VOLTAGES OF 600/1000 V AND 1 900/3300 V FOR FIXED INSTALLATIONS, HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES WHEN AFFECTED BY FIRE - SPECIFICATION |
| 11/30214057 DC : 0 | BS 7870-2 - LV AND MV POLYMERIC INSULATED CABLES FOR USE BY DISTRIBUTION AND GENERATION UTILITIES - PART 2: METHODS OF TEST |
| 02/208357 DC : DRAFT SEP 2002 | BS 7846/A1 - ELECTRIC CABLES - 600/1000 V ARMOURED FIRE-RESISTANT CABLES (HALOGEN-FREE) HAVING THERMOSETTING INSULATION AND LOW EMISSION OF SMOKE WHEN AFFECTED BY FIRE |
| BS 1722-18:2011 | Fences Specification for free-standing temporary steel mesh perimeter fencing panels |
| PD 8010-2:2004 | Code of practice for pipelines Subsea pipelines |
| BS 1722-17:2017 | Fences Specification for electric security fences. Design, installation and maintenance |
| 11/30229203 DC : 0 | BS 1722-18 - FENCES - PART 18: SPECIFICATION FOR FREE-STANDING TEMPORARY STEEL MESH PERIMETER FENCING SYSTEMS |
| 15/30301518 DC : 0 | BS 8002 - CODE OF PRACTICE FOR EARTH RETAINING STRUCTURES |
| BS 1722-10:2006 | Fences Specification for anti-intruder fences in chain link and welded mesh |
| BS 1722-2:2006 | Fences Specification for strained wire and wire mesh netting fences |
| BS 7861-2:2009 | Strata reinforcement support systems components used in coal mines Specification for flexible systems for roof reinforcement |
| EN 10218-1:2012 | Steel wire and wire products - General - Part 1: Test methods |
| EN 10244-1:2009/AC:2011 | STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 1: GENERAL PRINCIPLES |
| ASTM B 750 : 2016 : REDLINE | Standard Specification for GALFAN |
| EN 1179:2003 | Zinc an zinc alloys - Primary zinc |
| ISO 7989-2:2007 | Steel wire and wire products Non-ferrous metallic coatings on steel wire Part 2: Zinc or zinc-alloy coating |
| ISO 7802:2013 | Metallic materials — Wire — Wrapping test |
| ISO 7989-1:2006 | Steel wire and wire products Non-ferrous metallic coatings on steel wire Part 1: General principles |
US$160.51
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.