• There are no items in your cart

BS EN 10329 : 2005

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
Available format(s)

Hardcopy , PDF

Superseded date

03-31-2016

Language(s)

English

Published date

01-01-2005

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
  4.1 Mandatory
  4.2 Options to be indicated by the purchaser
5 Choice of coatings
  5.1 Types of coating
  5.2 Types of joint coatings depending on factory applied
      tube coating
  5.3 Documents
6 Application of the coating and general requirements
  6.1 Preparation of the surface before coating
  6.2 Conditions before application
  6.3 Appearance of the coating
  6.4 Testing
  6.5 Additional mechanical protection
  6.6 Repair
  6.7 Qualification of the application procedure and the coater
  6.8 Preliminary quality inspection
7 Coatings
  7.1 Bituminous tapes, petrolatum tapes, plastic tapes or heat
      shrinkable materials
  7.2 Liquid epoxy resin or liquid polyurethane
  7.3 Polypropylene
  7.4 Epoxy powder
Annex A (normative) Inspection of thickness
        A.1 General
        A.2 Apparatus
        A.3 Procedure
        A.4 Results
Annex B (normative) Holiday detection test
        B.1 General
        B.2 Apparatus
        B.3 Procedure
        B.4 Results
Annex C (normative) Adhesion test - Resistance to removal
        C.1 General
        C.2 Apparatus
        C.3 Procedure
        C.4 Results
Annex D (normative) Peel strength test
        D.1 Measurement of the peel strength on a coated sample
        D.2 Measurement of the peel strength on large diameter
            joint
        D.3 Measurement of the peel strength with a spring balance
Annex E (normative) Test for assessing the degree of cure of the
        epoxy coating by thermal analysis
        E.1 General
        E.2 Principle
        E.3 Sampling
        E.4 Procedure
        E.5 Results
Annex F (normative) Cathodic disbondment test
        F.1 General
        F.2 Apparatus
        F.3 Sampling
        F.4 Procedure
        F.5 Investigation procedure
        F.6 Results
Annex G (normative) Impact test
        G.1 General
        G.2 Apparatus
        G.3 Procedure
        G.4 Results
Annex H (normative) Indentation test
        H.1 General
        H.2 Apparatus
        H.3 Procedure
        H.4 Results
Annex I (informative) Qualification of the application procedure
        and the coater
        I.1 General
        I.2 Qualification of the procedure and the coater
        I.3 Frequency of inspections
        I.4 Retest
Bibliography

Describes the application and related testing of the corrosion protection coatings applied to steel surfaces left bare after the tubes and fittings (components) are joined by welding.

Committee
ISE/16/-/11
DevelopmentNote
Supersedes 02/704943 DC (03/2006)
DocumentType
Standard
Pages
48
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
NS EN 10329 : 1ED 2006 Identical
UNE-EN 10329:2008 Identical
NEN EN 10329 : 2006 Identical
NF EN 10329 : 2006 Identical
SN EN 10329 : 2006 Identical
NBN EN 10329 : 2006 Identical
EN 10329:2006 Identical
UNI EN 10329 : 2006 Identical
I.S. EN 10329:2006 Identical
DIN EN 10329:2006-04 Identical

ISO 2811-1:2016 Paints and varnishes — Determination of density — Part 1: Pycnometer method
EN ISO 4287:1998/A1:2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
ISO 4287:1997 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
EN 10290:2002 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings
EN 10288:2002 Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 2808:2007 Paints and varnishes Determination of film thickness
EN 10289:2002 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings
EN ISO 2811-1:2016 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
ISO 11357-2:2013 Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height
EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012)
ISO 1183-1:2012 Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
EN 10204:2004 Metallic products - Types of inspection documents
ISO 2815:2003 Paints and varnishes Buchholz indentation test
EN 12068:1998 Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions
EN 10224:2002/A1:2005 NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
ISO 306:2013 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
EN ISO 2815:2003 Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
EN ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007)
EN ISO 1133:2005 PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS
EN 10310:2003 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
ISO 527-3:1995 Plastics Determination of tensile properties Part 3: Test conditions for films and sheets
EN ISO 527-3:1995/AC:2002 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
ISO 1133:2005 Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
EN ISO 1183-1:2012 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
EN ISO 2808:2007 Paints and varnishes - Determination of film thickness (ISO 2808:2007)
ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)

View more information
US$294.67
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.