BS EN 10346:2015
Current
The latest, up-to-date edition.
Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions
Hardcopy , PDF
English
07-31-2015
European foreword
1 Scope
2 Normative References
3 Terms and definitions
4 Classification and designation
5 Information to be supplied by the purchaser
6 Manufacturing and processing
7 Requirements
8 Inspection
9 Marking
10 Packing
11 Storage and transportation
Annex A (normative) - Reference method for determination
of the zinc, zinc-iron, zinc-aluminium, zinc-magnesium
and aluminium-zinc coating mass
Annex B (normative) - Reference method for determination
of the aluminium-silicon coating mass
Annex C (normative) - Method for determination of the mass
of the Al-Fe-Si alloy layer
Annex D (informative) - Technical changes from the previous
edition
Bibliography
Describes requirements for continuously hot-dip coated products made of low carbon steels for cold forming, of steels for construction,and of steels with high proof strength for cold forming and coated with zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA), aluminium-zinc alloy (AZ) or aluminium-silicon alloy (AS), and for continuously hot-dip coated products made of multiphase steels for cold forming coated with zinc (Z) zinc-iron alloy (ZF) or zinc-aluminium alloy (ZA) with thicknesses of 0,20<= t < 3,0 mm.
This European Standard specifies requirements for continuously hot-dip coated products made of low carbon steels for cold forming, of steels for construction and of steels with high proof strength for cold forming coated with zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA), aluminium-zinc alloy (AZ), aluminium-silicon alloy (AS) or zinc-magnesium alloy (ZM) and for continuously hot-dip coated products made of multiphase steels for cold forming coated with zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA) or zinc-magnesium alloy (ZM) in thicknesses of 0,20mm≤ t
Committee |
ISE/109
|
DevelopmentNote |
Supersedes BS EN 10292, BS EN 10326, BS EN 10327 & 07/30164802 DC. Together with BS EN 10152 supersedes BS EN 10336. (04/2009) Supersedes 13/30280395 DC. (07/2015)
|
DocumentType |
Standard
|
Pages |
46
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
EN 10346:2015 | Identical |
BS 8612:2018 | Dry fixed ridge, hip, and verge systems for slating and tiling. Specification |
BS 8499:2017 | Specification for domestic gas meter boxes and meter bracket |
BS 1722-14:2017 | Fences Specification for open mesh steel panel |
BS 5502-22(2003) : 2003 | BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 22: CODE OF PRACTICE FOR DESIGN, CONSTRUCTION AND LOADING |
17/30324405 DC : 0 | BS 8612 - DRY-FIXED RIDGE, HIP, AND VERGE SYSTEMS FOR SLATING AND TILING - SPECIFICATION |
13/30262060 DC : 0 | BS 5502-22+A1 - BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 22: CODE OF PRACTICE FOR DESIGN, CONSTRUCTION AND LOADING |
BS 8499:2009 | Specification for domestic gas meter boxes and meter bracket |
16/30339191 DC : 0 | BS 8529 - COMPOSITE DOORSETS - DOMESTIC EXTERNAL DOORSETS - SPECIFICATION |
BS 6510:2010 | Steel-framed windows and glazed doors. Specification |
PD 7974-3:2011 | Application of fire safety engineering principles to the design of buildings Structural response and fire spread beyond the enclosure of origin |
BS 1245:2012 | Pedestrian doorsets and door frames made from steel sheet. Specification |
16/30270371 DC : 0 | BS 9101 - STEEL AND ALUMINIUM RAINWATER SYSTEMS - SPECIFICATION |
BS 8529:2017 | Composite doorsets. Domestic external doorsets, Specification |
11/30142900 DC : 0 | BS 1245 - PEDESTRIAN DOORSETS AND DOOR FRAMES MADE FROM STEEL SHEET - SPECIFICATION |
17/30341308 DC : DRAFT JUNE 2017 | BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL |
BIP 2198 : 2012 | CONCISE EUROCODE FOR DESIGN OF TIMBER STRUCTURES: BS EN 1995: EUROCODES 5 |
BS 9101:2017 | Steel and aluminium rainwater systems. Specification |
BS 6150(2006) : 2006 | PAINTING OF BUILDINGS - CODE OF PRACTICE |
BS 493(1995) : 1995 | SPECIFICATION FOR AIRBRICKS AND GRATINGS FOR WALL VENTILATION |
ISO 10275:2007 | Metallic materials Sheet and strip Determination of tensile strain hardening exponent |
EN 10079:2007 | Definition of steel products |
EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
ISO 14713-1:2017 | Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN 10149-2:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels |
EN 10169:2010+A1:2012 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
EN 10143:2006 (edition 2) | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
EN 10021:2006 | General technical delivery conditions for steel products |
EN ISO 14713-1:2017 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017) |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN 10049:2013 | Measurement of roughness average Ra and peak count RPc on metallic flat products |
EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
ISO 10113:2006 | Metallic materials Sheet and strip Determination of plastic strain ratio |
EN 10020:2000 | Definition and classification of grades of steel |
EN 606:2004 | BAR CODING - TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS |
ISO 14713-2:2009 | Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizing |
EN 10325:2006 | Steel - Determination of yield strength increase by the effect of heat treatment [Bake-Hardening-Index] |
EN ISO 14713-2:2009 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.