BS EN 1254-2:1998
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with copper tubes
Available format(s)
Hardcopy , PDF
Superseded date
03-13-2023
Language(s)
English
Published date
06-15-1998
Publisher
Foreword
1 Scope
2 Normative references
3 Definitions
3.1 Plumbing fitting
3.2 Compression end
3.3 Reducer (compression end for copper tube)
3.4 Adaptor fitting
3.5 Nominal diameter
4 Requirements
4.1 General
4.2 Materials
4.3 Dimensions and tolerances
4.4 Design and manufacture
4.5 Production test requirements
4.6 Type test requirements
5 Test methods
5.1 Sampling procedure
5.2 Preparation of fittings for testing
5.3 Test sequence
5.4 Leaktightness under internal hydrostatic pressure
5.5 Resistance to pull-out
5.6 Leaktightness under internal hydrostatic pressure
whilst subjected to bending
5.7 Pressure test
5.8 Dezincification resistance test
5.9 Stress corrosion resistance test
6 Designation
7 Marking
7.1 General
7.2 Dezincification resistant copper-zinc alloys
8 Documentation
8.1 Declaration of conformity
8.2 User instructions
Annex A (normative) Determination of mean depth of
dezincification
Annex B (informative) Bibliography
Defines materials, assembly dimensions and tolerances and test requirements for fittings of coper and copper alloys with or without plating or coating. Establishes maximum permissible temperatures and pressures.
| Committee |
NFE/34
|
| DevelopmentNote |
Supersedes BS 864-2(1983). Supersedes 94/700082 DC. (06/2004)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN 1254-2 : 1998 | Identical |
| UNI EN 1254-2 : 2000 | Identical |
| UNE-EN 1254-2:1999 | Identical |
| NBN EN 1254-2 : 1998 | Identical |
| EN 1254-2:1998 | Identical |
| I.S. EN 1254-2:1998 | Identical |
| DIN EN 1254-2:1998-03 | Identical |
| SN EN 1254-2 : 1998 | Identical |
| NS EN 1254-2 : 1ED 1998 | Identical |
| NF EN 1254-2 : 1998 | Identical |
| ONORM EN 1254-2 : 1998 | Identical |
| 09/30208674 DC : 0 | BS 7291-1 - THERMOPLASTICS PIPE AND FITTING SYSTEMS FOR HOT AND COLD WATER FOR DOMESTIC PURPOSES AND HEATING INSTALLATIONS IN BUILDINGS - PART 1: GENERAL REQUIREMENTS |
| BS 5245:1975 | Specification for phosphoric acid based flux for soft soldered joints in stainless steel |
| 11/30228295 DC : 0 | BS 8558 - GUIDE TO THE DESIGN, INSTALLATION, TESTING, OPERATION AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - COMPLEMENTARY GUIDANCE TO BS EN 806 |
| 13/30199128 DC : 0 | BS 6891 - SPECIFICATION FOR THE INSTALLATION AND MAINTENANCE OF LOW PRESSURE GAS INSTALLATION PIPEWORK OF UP TO 35 MM (R1[1/4]) IN PREMISES |
| BS 5410-1:2014 | Code of practice for oil firing Installations up to 45 kW output capacity for space heating and hot water supply purposes |
| BS 8558:2015 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
| DEFSTAN 02-797(PT1)/3(2009) : 2009 | PIPEWORK ENGINEERING - PART 1: GENERAL |
| DEFSTAN 02-797(PT4)/2(2008) : 2008 | PIPEWORK ENGINEERING - PART 4: SCREWED COUPLINGS AND COMPRESSION FITTINGS |
| BS 7291-2:2010 | Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings Specification for polybutylene (PB) pipe and associated fittings |
| DEFSTAN 02-728/3(2010) : 2010 | REQUIREMENTS FOR DOMESTIC HOT AND COLD FRESH WATER SYSTEMS |
| 12/30170835 DC : 0 | BS 5410-2 - CODE OF PRACTICE FOR OIL FIRING - PART 2: SPACE HEATING, HOT WATER AND STEAM SUPPLY SERVICES FOR COMMERCIAL AND INDUSTRIAL PREMISES |
| 05/30111068 DC : DRAFT SEP 2005 | BS 7291-3 - THERMOPLASTICS PIPES AND ASSOCIATED FITTINGS FOR HOT AND COLD WATER FOR DOMESTIC PURPOSES AND HEATING INSTALLATIONS IN BUILDINGS - PART 3: SPECIFICATION FOR CROSS-LINKED POLYETHYLENE (PE-X) PIPES AND ASSOCIATED FITTINGS |
| PD 5482-3:2005 | Code of practice for domestic butane and propane gas-burning installations Installations in boats, yachts and other vessels |
| BS 5482-1:2005 | Code of practice for domestic butane- and propane-gas-burning installations Installations at permanent dwellings, residential park homes and commercial premises, with installation pipework sizes not exceeding DN 25 for steel and DN 28 for corrugated stainless steel or copper |
| BS 7291-3:2001 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings Specification for cross-linked polyethylene (PE-X) pipes and associated fittings |
| BS 7291-3:2010 | Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings Specification for crosslinked polyethylene (PE-X) pipes and associated fittings |
| BS 7291-1:2001 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings General requirements |
| BS 6891:2015 | Specification for the installation and maintenance of low pressure gas installation pipework of up to 35 mm (R1¼) on premises |
| BS 7291-2:2001 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings Specification for polybutylene (PB) pipes and associated fittings |
| BS 5306-1:2006 | Code of practice for fire extinguishing installations and equipment on premises Hose reels and foam inlets |
| BS 7291-1:2006 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings General requirements |
| BS 7291-3:2006 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings Specification for cross-linked polyethylene (PE-X) pipes and associated fittings |
| BS 7291-1:2010 | Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings General requirements |
| BS 6891(2005) : 2005 | INSTALLATION OF LOW PRESSURE GAS PIPEWORK OF UP TO 35 MM (R1[1/4]) IN DOMESTIC PREMISES (2ND FAMILY GAS) - SPECIFICATION |
| BS 7291-2:2006 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings Specification for polybutylene (PB) pipes and associated fittings |
| PD 54823:2016 | Guidance for the design, commissioning and maintenance of LPG systems in small craft |
| 05/30111064 DC : DRAFT SEP 2005 | BS 7291-1 - THERMOPLASTICS PIPES AND ASSOCIATED FITTINGS FOR HOT AND COLD WATER FOR DOMESTIC PURPOSES AND HEATING INSTALLATIONS IN BUILDINGS - PART 1: GENERAL REQUIREMENTS |
| BS DD251(2000) : 2000 | SPRINKLER SYSTEMS FOR RESIDENTIAL AND DOMESTIC OCCUPANCIES - CODE OF PRACTICE |
| 05/30116741 DC : DRAFT JUNE 2005 | BS 6891 - INSTALLATION OF LOW PRESSURE GAS PIPEWORK OF UP TO 35 MM (R1$9D) IN DOMESTIC PREMISES (2ND FAMILY GAS) - SPECIFICATION |
| BS 8558:2011 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
| 09/30208676 DC : 0 | BS 7291-2 - THERMOPLASTICS PIPES AND ASSOCIATED FITTINGS FOR HOT AND COLD WATER FOR DOMESTIC PURPOSES AND HEATING INSTALLATIONS IN BUILDINGS - PART 2: SPECIFICATION FOR POLYBUTYLENE (PB) PIPES AND ASSOCIATED FITTINGS |
| 05/30111066 DC : DRAFT SEP 2005 | BS 7291-2 - THERMOPLASTICS PIPES AND ASSOCIATED FITTINGS FOR HOT AND COLD WATER FOR DOMESTIC PURPOSES AND HEATING INSTALLATIONS IN BUILDINGS - PART 2: SPECIFICATION FOR POLYBUTYLENE (PB) PIPES AND ASSOCIATED FITTINGS |
| 14/30285453 DC : 0 | BS 5410-1 - CODE OF PRACTICE FOR OIL FIRING - PART 1: INSTALLATIONS UP TO 45 KW OUTPUT CAPACITY FOR SPACE HEATING AND HOT WATER SUPPLY PURPOSES |
| BS 5955-8:2001 | Plastics pipework (thermoplastics materials) Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildings |
| 09/30208678 DC : 0 | BS 7291-3 - THERMOPLASTICS PIPES AND ASSOCIATED FITTINGS FOR HOT AND COLD WATER FOR DOMESTIC PURPOSES AND HEATING INSTALLATIONS IN BUILDINGS - PART 3: SPECIFICATION FOR CROSS-LINKED POLYETHYLENE (PE-X) PIPES AND ASSOCIATED FITTINGS |
| 15/30299694 DC : 0 | BS 8558 - GUIDE TO THE DESIGN, INSTALLATION, TESTING AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - COMPLEMENTARY GUIDANCE TO BS EN 806 |
| 05/30086662 DC : DRAFT JAN 2005 | BS 6400-2 - SPECIFICATION FOR THE INSTALLATION, EXCHANGE, RELOCATION AND REMOVAL OF DOMESTIC-SIZED GAS METERS (2ND AND 3RD FAMILY GASES) - PART 2: MEDIUM PRESSURE (2ND FAMILY GASES) |
| BS 8537:2010 | Copper and copper alloys. Plumbing fittings. Specification for press ends of plumbing fittings for use with metallic tubes |
| 15/30281782 DC : 0 | PD 5482-3 - GUIDANCE FOR THE DESIGN, COMMISSIONING AND MAINTENANCE OF LPG SYSTEMS IN SMALL CRAFT |
| BS 6400-1:2002 | Specification for installation of domestic-sized gas meters maximum rated capacity not exceeding 6 m<sup>3</sup>/h (2nd and 3rd family gases) Low pressure (2nd family gases) |
| BS PAS 33(1999) : 1999 | SPECIFICATION FOR THE DESIGN, INSTALLATION AND COMMISSIONING OF GAS FIRED CENTRAL HEATING SYSTEMS IN DOMESTIC PREMISES |
| BS 5410-2:2013 | Code of practice for oil firing Installations over 45 kW output capacity for space heating, hot water and steam supply services |
| BS 5410-1:1997 | Code of practice for oil firing Installations up to 45 kW output capacity for space heating and hot water supply purposes |
| EN 1254-3:1998 | Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
| EN 1254-4:1998/AC:1999 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS |
| EN 1254-5:1998 | Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
| ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 6509:1981 | Corrosion of metals and alloys Determination of dezincification resistance of brass |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 12164:2016 | Copper and copper alloys - Rod for free machining purposes |
| EN ISO 6509 : 1995 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF DEZINCIFICATION RESISTANCE OF BRASS |
| PREN 12449 : DRAFT 2011 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
US$170.10
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.