• There are no items in your cart

BS EN 12699:2015

Current
Current

The latest, up-to-date edition.

Execution of special geotechnical works. Displacement piles
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

04-30-2015

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information needed for the execution of the work
5 Geotechnical investigation
6 Materials and products
7 Considerations related to design
8 Execution
9 Supervision, monitoring and testing
10 Records
11 Special requirements
Annex A (informative) - Classification and examples
Annex B (informative) - Guidance on minimum cover
        (in mm) for bearing element of low strength
        steel for cast in situ displacement piles
Annex C (informative) - Degree of obligation of the
        provisions
Bibliography

Defines general principles for the execution of displacement piles, that means piles which are installed in the ground without excavation or removal of material from the ground except for limiting heave and/or limiting vibration as well as removal of obstructions or to assist penetration.

1.1 This European Standard establishes general principles for the execution of displacement piles, that means piles which are installed in the ground without excavation or removal of material from the ground except for limiting heave and/or limiting vibration as well as removal of obstructions or to assist penetration. Piles are driven into the ground using impact, vibration, pressing, screwing or a combination of these methods. 1.2 The material of displacement piles covered by this European Standard can be: steel; cast iron; concrete, mortar; timber; grout; combination of above. 1.3 This European Standard covers prefabricated, cast in situ, or a combination of these methods to form displacement piles of regular shape. Examples are given in FigureA.2 and FigureA.3. 1.4 Displacement piles may be installed in soils enhanced by ground improvement techniques. The ground improvement can be executed before, at the same time or after installation of the piles. 1.5 Other than practical considerations there are for the purpose of this European Standard no limitations regarding cross section dimensions, shaft or base enlargements, length or rake. 1.6 The provisions of this European Standard apply to: single piles; pile groups; concrete sheet piles. 1.7 Columns constructed by ground improvement techniques (such as mixed in situ columns, jet grouting, compaction grouting, vibro flotation, stone columns) are not covered by this European Standard. Bored piles are covered in EN1536 . Steel and timber sheet pile walls are covered in EN12063 . Micropiles are covered in EN14199 .

Committee
B/526
DevelopmentNote
Supersedes 97/100560 DC. (09/2002) Supersedes 13/30280740 DC. (05/2015)
DocumentType
Standard
Pages
74
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
UNI EN 12699 : 2002 Identical
I.S. EN 12699:2015 Identical
SN EN 12699 : 2015 Identical
EN 12699:2015 Identical
NEN EN 12699 : 2015 Identical
NS EN 12699 : 2000 Identical
DIN EN 12699:2015-07 Identical
UNE-EN 12699:2016 Identical
NBN EN 12699 : 2015 Identical
NF EN 12699 : 2001 Identical

BS EN 1993-5 NA : 2009 UK NATIONAL ANNEX TO EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 5: PILING
15/30301520 DC : 0 BS 8004 - CODE OF PRACTICE FOR FOUNDATIONS (FORMERLY CP 2004)
BS 8004:2015 Code of practice for foundations
BS 6100-12:2008 Building and civil engineering. Vocabulary Plant, equipment and persons
BS 6100-3:2007 Building and civil engineering. Vocabulary Civil engineering. General
BS 6100-0:2010 Building and civil engineering. Vocabulary Introduction and index
15/30302283 DC : 0 BS 8081 - GROUTED ANCHORS - CODE OF PRACTICE
BS 8081:2015 CODE OF PRACTICE FOR GROUTED ANCHORS
09/30093195 DC : 0 BS 6349-2 - MARITIME WORKS - PART 2: CODE OF PRACTICE FOR THE DESIGN OF QUAY WALLS, JETTIES AND DOLPHINS
08/30128156 DC : DRAFT JUNE 2008 BS NA FOR BS EN 1993-5 - NATIONAL ANNEX FOR BS EN 1993-5
BS 6349-2:2010 Maritime works Code of practice for the design of quay walls, jetties and dolphins

EN ISO 9692-1:2013 Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013)
ISO 14341:2010 Welding consumables Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels Classification
EN ISO 5817:2014 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
EN 12794:2005+A1:2007/AC:2008 PRECAST CONCRETE PRODUCTS - FOUNDATION PILES
EN ISO 9692-2:1998/AC:1999 WELDING AND ALLIED PROCESSES - JOINT PREPARATION - PART 2: SUBMERGED ARC WELDING OF STEELS
EN ISO 11960:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
ISO 17660-1:2006 Welding — Welding of reinforcing steel — Part 1: Load-bearing welded joints
EN 1536:2010+A1:2015 Execution of special geotechnical work - Bored piles
EN 12063:1999 EXECUTION OF SPECIAL GEOTECHNICAL WORK - SHEET PILE WALLS
ISO 2560:2009 Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification
ISO 18276:2017 Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification
EN ISO 4063:2010 Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)
ISO 9606-1:2012 Qualification testing of welders — Fusion welding — Part 1: Steels
EN ISO 18276:2017 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017)
EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
ISO 5817:2014 Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
ISO 9692-1:2013 Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels
EN ISO 17660-1:2006 Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006)
EN ISO 14341:2011 Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010)
EN ISO 2560:2009 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009)
EN 1997-2:2007/AC:2010 EUROCODE 7 - GEOTECHNICAL DESIGN - PART 2: GROUND INVESTIGATION AND TESTING
EN 10204:2004 Metallic products - Types of inspection documents
EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 1997-1:2004/A1:2013 EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
ISO 9692-2:1998 Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels
EN 14199:2015 Execution of special geotechnical works - Micropiles
ISO 4063:2009 Welding and allied processes — Nomenclature of processes and reference numbers
EN 1990:2002/A1:2005/AC:2010 EUROCODE - BASIS OF STRUCTURAL DESIGN
EN ISO 9606-1:2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
EN 13670:2009 Execution of concrete structures
EN 10083-3:2006/AC:2008 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
EN 206:2013+A1:2016 Concrete - Specification, performance, production and conformity
ISO 11960:2014 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling

View more information
US$356.96
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.