• There are no items in your cart

BS EN 13253:2016

Current
Current

The latest, up-to-date edition.

Geotextiles and geotextile-related products. Characteristics required for use in erosion control works (coastal protection, bank revetments)
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

10-31-2016

European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Required characteristics and corresponding methods
  of test
5 Assessment and verification of constancy of performance
  (AVCP)
6 Marking
Annex A (normative) - Factory production control
Annex B (normative) - Durability aspects
Annex C (informative) - Guidelines for the selection of the
        appropriate standard in a specific application
Annex D (informative) - Significant technical changes to the
        superseded standard
Annex ZA (informative) - Clauses of this European Standard
         addressing the provisions of the EU
         Construction Products Regulation
Bibliography

Defines the relevant characteristics of geotextiles and geotextile-related products used in erosion control works for preventing the migration of fine-graded material into layers of coarser material due to alternating hydraulic gradients, and the appropriate test methods to determine these characteristics.

This European Standard specifies the relevant characteristics of geotextiles and geotextile-related products used in erosion control works for preventing the migration of fine-graded material into layers of coarser material due to alternating hydraulic gradients, and the appropriate test methods to determine these characteristics. This European Standard covers applications in coastal protection and bank revetment. This European Standard does not cover surface erosion, where the geotextile or geotextile-related product is located at the surface. The intended use of these geotextiles or geotextile-related products is to fulfil one or more of the following functions: filtration, separation and reinforcement. The separation function will always occur in conjunction with filtration or reinforcement, and hence will not be specified alone. This European Standard is not applicable to geosynthetic barriers, as defined in ENISO10318‑1 . This European Standard provides for the assessment and verification of constancy of performance of the product to this European Standard and for factory production control procedures. Particular application cases may contain requirements regarding additional properties and – preferably standardized – test methods, if they are technically relevant. This European Standard may be used to derive design values by taking into account factors within the context of the definitions given in EN1997‑1 (Eurocode 7), e.g. factors of safety. The design life of the product should be determined, since its function may be temporary, as a construction expediency, or permanent, for the lifetime of the structure.

Committee
B/553
DevelopmentNote
Supersedes 98/105406 DC. (09/2002) Supersedes 11/30239929 DC. (02/2014)
DocumentType
Standard
Pages
48
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
SN EN 13253 : 2017 Identical
UNI EN 13253 : 2014 Identical
DIN EN 13253:2016-12 Identical
NBN EN 13253 : 2014 + A1 2015 Identical
I.S. EN 13253:2016 Identical
EN 13253:2016 Identical
NEN EN 13253 : 2016 Identical
UNE-EN 13253:2017 Identical
NF EN 13253 : 2017 Identical
NS EN 13253 : 2016 Identical
DIN EN 13253:2001-04 Identical

EN 13265:2016 Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
EN 13719:2016 Geosynthetics - Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers
EN ISO 13433:2006 Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433:2006)
EN ISO 14021:2016 Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016)
ISO 10321:2008 Geosynthetics — Tensile test for joints/seams by wide-width strip method
EN 12226:2012 Geosynthetics - General tests for evaluation following durability testing
ISO 13438:2004 Geotextiles and geotextile-related products Screening test method for determining the resistance to oxidation
ISO 12956:2010 Geotextiles and geotextile-related products Determination of the characteristic opening size
EN ISO 10319:2015 Geosynthetics - Wide-width tensile test (ISO 10319:2015)
EN 13251:2016 Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
EN ISO 13426-2:2005 Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005)
EN 13249:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
ISO 10320:1999 Geotextiles and geotextile-related products Identification on site
EN ISO 1043-1:2011/A1:2016 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
ISO 12236:2006 Geosynthetics — Static puncture test (CBR test)
EN 14030:2001/A1:2003 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO ACID AND ALKALINE LIQUIDS
EN ISO 13426-1 : 2003 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 1: GEOCELLS
EN 14574:2015 Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics
EN 13253:2016 Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
ISO 10319:2015 Geosynthetics — Wide-width tensile test
ISO 14021:2016 Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)
EN 13250:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
EN ISO 10321:2008 Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008)
EN 12224 : 2000 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING
CEN/TR 15019 : 2005 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - ON-SITE QUALITY CONTROL
ISO 13426-2:2005 Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 2: Geocomposites
EN 13255:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
ISO 9862:2005 Geosynthetics — Sampling and preparation of test specimens
EN ISO 10320:1999 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - IDENTIFICATION ON SITE
EN 13254:2016 Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams
ISO 13433:2006 Geosynthetics — Dynamic perforation test (cone drop test)
ISO/TS 13434:2008 Geosynthetics Guidelines for the assessment of durability
ISO 12957-1:2005 Geosynthetics Determination of friction characteristics Part 1: Direct shear test
EN ISO 10318-1:2015 Geosynthetics - Part 1: Terms and definitions (ISO 10318-1:2015)
EN ISO 13431:1999 Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999)
EN ISO 11058:2010 Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:2010)
EN ISO 12957-2:2005 Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2005)
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO/TR 12960:1998 Geotextiles and geotextile-related products Screening test method for determining the resistance to liquids
ISO 11058:2010 Geotextiles and geotextile-related products Determination of water permeability characteristics normal to the plane, without load
ISO 13426-1:2003 Geotextiles and geotextile-related products Strength of internal structural junctions Part 1: Geocells
ISO 12957-2:2005 Geosynthetics — Determination of friction characteristics — Part 2: Inclined plane test
EN 12225 : 2000 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - METHOD FOR DETERMINING THE MICROBIOLOGICAL RESISTANCE BY A SOIL BURIAL TEST
ASTM D 7409 : 2015 : REDLINE Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
ISO 9001:2015 Quality management systems — Requirements
ISO 10390:2005 Soil quality Determination of pH
ISO 3696:1987 Water for analytical laboratory use — Specification and test methods
EN 13256:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)
EN 1997-1:2004/A1:2013 EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
EN ISO 12236:2006 Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006)
ISO 13431:1999 Geotextiles and geotextile-related products — Determination of tensile creep and creep rupture behaviour
ISO 1043-1:2011 Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
EN 12447:2001 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO HYDROLYSIS IN WATER
EN ISO 12956:2010 Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:2010)
EN 13252:2016 Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
EN ISO 10722:2007 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (ISO 10722:2007)
EN ISO 9862:2005 Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005)
ISO 10722:2007 Geosynthetics Index test procedure for the evaluation of mechanical damage under repeated loading Damage caused by granular material

View more information
US$294.67
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.