BS EN 13445-2 : 2014
Current
The latest, up-to-date edition.
UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
Hardcopy , PDF
English
01-01-2014
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and units
4 Requirements for materials to be used
for pressure-bearing parts
5 Requirements for materials to be used for
non-pressure parts
Annex A (normative) - Grouping system for steels for
pressure equipment
Annex B (normative) - Requirements for prevention of
brittle fracture at low temperatures
Annex C (informative) - Procedure for determination of
the weld creep strength reduction factor (WCSRF)
Annex D (informative) - Technical delivery conditions for
clad products for pressure purposes
Annex E (informative) - European steels for pressure purposes
Annex Y (informative) - History of EN 13445-2
Annex ZA (informative) - Relationship between this European
Standard and the essential requirements of Directive
2014/68/EU aimed to be covered
Bibliography
Defines the requirements for the selection, inspection, testing and marking of metallic materials for the fabrication of unfired pressure vessels.
Committee |
PVE/1
|
DevelopmentNote |
Supersedes 99/706402 DC (07/2002) 2014 Edition Re-issued in October 2017 & incorporates AMD 1 2016. Supersedes 15/30315958 DC. (10/2017)
|
DocumentType |
Standard
|
Pages |
88
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
EN 13445-2:2014/A2:2018 | Identical |
NF EN 13445-2 : 2014 AMD 1 2017 | Identical |
DIN EN 13445-2:2015-12 | Identical |
I.S. EN 13445-2:2014 | Identical |
EN 13445-2:2014 | Identical |
UNI EN 13445-2 : 2015 | Identical |
NEN EN 13445-2 : 2016 | Identical |
SN EN 13445-2 : 2014 AMD 1 2017 | Identical |
NS EN 13445-2 : 2014 AMD 1 2016 | Identical |
NBN EN 13445-2 : 2014 | Identical |
UNE-EN 13445-2:2015 | Identical |
ONORM EN 13445-2 : 2017 | Identical |
07/30160560 DC : DRAFT JAN 2007 | PD 5500 AMD 2 - SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
EEMUA 168 : 2010 | GUIDE TO THE PRESSURE TESTING OF IN-SERVICE PRESSURISED EQUIPMENT |
ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
ISO 14343:2017 | Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification |
EN 10079:2007 | Definition of steel products |
EN 13445-5 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
EN 10213:2007+A1:2016 | Steel castings for pressure purposes |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
EN 10028-3:2017 | Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
EN 10028-6:2017 | Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered |
ISO/TR 15608:2017 | Welding Guidelines for a metallic materials grouping system |
ISO 2566-2:1984 | Steel Conversion of elongation values Part 2: Austenitic steels |
EN 764-1:2015+A1:2016 | Pressure equipment - Part 1: Vocabulary |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN 10217-4:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
EN ISO 204:2009 | Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009) |
EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
EN 764-5:2014 | Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification |
EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
EN 1011-2:2001/A1:2003 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS |
ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
EN 13445-4 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
EN 10272:2016 | Stainless steel bars for pressure purposes |
EN 10028-5:2017 | Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled |
EN 10222-3:2017 | Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties |
ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
EN 10217-2:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
EN ISO 2566-2:1999 | Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984) |
EN 10222-4:2017 | Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength |
EN ISO 14343:2017 | Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2017) |
EN 10222-2:2017 | Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
EN 10204:2004 | Metallic products - Types of inspection documents |
CEN ISO/TR 15608:2017 | Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017) |
EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
EN 10217-3:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
EN 12074:2000 | Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes |
EN 764-2:2012 | Pressure equipment - Part 2: Quantities, symbols and units |
EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
EN 10216-4:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
EN 10028-4:2017 | Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
EN 764-3:2002 | Pressure equipment - Part 3: Definition of parties involved |
ISO 204:2009 | Metallic materials Uniaxial creep testing in tension Method of test |
EN 764-4:2014 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
EN 10253-2:2007 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
EN 10217-1:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
EN 10217-5:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
EN 13479:2017 | Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials |
EN 10217-6:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
EN 10216-3:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.