• There are no items in your cart

BS EN 13763-26:2004

Current
Current

The latest, up-to-date edition.

Explosives for civil uses. Detonators and relays Definitions, methods and requirements for devices and accessories for reliable and safe functioning of detonators and relays
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

08-24-2004

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements for Testing
5 Blasting machines for initiating electric detonators
   5.1 Requirements for blasting machines to be verified
        by visual examination of the machine, simple measurement
        and reference to the manufacturer's parts list and scale
        drawings
   5.2 Test for insulation resistance between exposed conducting
        parts
   5.3 Electrical voltage withstand of insulated parts
   5.4 Test to determine the output energy of the blasting machine
   5.5 Test to determine the output voltage of a blasting machine
   5.6 Test to check the "battery low" indication on battery operated
        machines
   5.7 "Ready to fire" interlock and indicator on clockwork or capacitor
        blasting machines designed to produce a non-adjustable
        pre-determined output firing voltage
   5.8 Test to ensure the accuracy of capacitor blasting machine's
        indicators
   5.9 Test to check that a sequential blasting machine will not fire
        if any of the initiating circuits connected to its output
        terminals are open circuit or contain too much resistance
        to ensure reliable initiation
   5.10 Test to check that capacitor discharge machines include a safety
        discharge mechanism
   5.11 Test to check that, when fired, the output of a clockwork driven
        blasting machine is not released until the generated voltage is
        at least 90% of the maximum intended value
   5.12 Ignition protection of blasting machines intended for use in
        potentially explosive atmospheres
   5.13 Test to check the output energy cut-off device in machines
        intended for use in potentially explosive atmospheres of gas
   5.14 Electromagnetic compatibility and interference tests
   5.15 Ingress protection tests
   5.16 Climatic and mechanical tests
   5.17 Marking requirements for blasting machines
6 Blasting machine checkers
   6.1 General
   6.2 Requirements for blasting machines checkers to be verified by
        visual examination of the checker, simple measurement and
        reference to the manufacturer's parts list and scale drawings
   6.3 Test for insulation resistance between exposed parts
   6.4 Electrical voltage withstand of insulated parts
   6.5 Test to establish the checker's ability to indicate that a
        blasting machine will function correctly, also to indicate
        abnormal deterioration in a blasting machine's output
   6.6 Blasting machine checkers used to check the output energy cut
        off time of blasting machine's intended for use in potentially
        explosive atmospheres
   6.7 Electromagnetic compatibility and interference test
   6.8 Ingress protection
   6.9 Climatic and mechanical tests
   6.10 Marking requirements for blasting machine checkers
7 Field circuit testers
   7.1 Requirements for field circuit testers to be verified by visual
        examination of the tester, simple measurement and reference to
        the manufacturer's scale drawings
   7.2 Test for insulation resistance between exposed conducting parts
   7.3 Test for electrical voltage withstand of insulated parts
   7.4 Tests for short circuit current limitation and maximum output
        energy
   7.5 Test of the accuracy of field circuit testers
   7.6 Intrinsic safety of field circuit testers intended for use in
        potentially explosive atmospheres
   7.7 Electromagnetic compatibility and interference
   7.8 Ingress protection
   7.9 Climatic and mechanical tests
   7.10 Marking requirements for field circuit testers
8 Shot-firing cables for use with electric blasting machines
   8.1 Types of shot firing cable
   8.2 Electrical resistance
   8.3 Tensile tests
   8.4 Shot-firing cables flexural strength tests
   8.5 Shot-firing cable abrasion test
   8.6 Shot-firing cable insulation test
   8.7 Shot-firing cable thermostability tests
   8.8 Shot-firing cables electrical insulation resistance and
        insulation breakdown
   8.9 Marking requirements for shot-firing cables
9 Connecting wires for use with electric blasting machines
   9.1 Types of connecting wires
   9.2 Requirements and tests
   9.3 Marking requirements for connecting wires
10 Shock tube initiators
   10.1 Requirements for shock tube initiators to be verified by
        visual examination of the initiator, simple measurement
        and reference to the manufacturer's scale drawings
   10.2 Function test for shock tube initiators
   10.3 Electromagnetic compatibility and interference
   10.4 Ingress protection
   10.5 Climatic and mechanical tests
   10.6 Marking requirements for shock tube initiators
Annex A (normative) Electromagnetic compatibility and interference
        testing as described in the relevant European Standard
Annex B (normative) Climatic and mechanical tests
Bibliography

Describes the constructional and functional requirements and methods for testing of devices and accessories needed for the reliable and safe initiation of detonators and relays, under normal working conditions.

Committee
CII/61
DevelopmentNote
Supersedes 01/122693 DC (09/2004)
DocumentType
Standard
Pages
62
PublisherName
British Standards Institution
Status
Current
Supersedes

17/30341835 DC : 0 BS 5607 - CODE OF PRACTICE FOR THE SAFE USE OF EXPLOSIVES IN THE CONSTRUCTION INDUSTRY
BS 5607:2017 Code of practice for the safe use of explosives in the construction industry

EN 13763-4 : 2003 EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 4: DETERMINATION OF RESISTANCE TO ABRASION OF LEADING WIRES AND SHOCK TUBES
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
EN 13763-1 : 2004 EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 1: REQUIREMENTS
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
EN 61000-4-11:2004/A1:2017 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017)
EN 13763-22 : 2003 EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 22: DETERMINATION OF CAPACITANCE, INSULATION RESISTANCE AND INSULATION BREAKDOWN OF LEADING WIRES
EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
EN 50020:2002 Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i'
EN 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
EN 60068-2-64:2008 ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
IEC 60068-2-64:2008 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
1973/23/EEC : 1973 COUNCIL DIRECTIVE OF 19 FEBRUARY 1973 ON THE HARMONIZATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS
EN 13763-5 : 2003 EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 5: DETERMINATION OF RESISTANCE TO CUTTING DAMAGE OF LEADING WIRES AND SHOCK TUBES
IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
EN 61000-4-3 : 2006 AMD 2 2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
EN 13857-1 : 2003 EXPLOSIVES FOR CIVIL USES - PART 1: TERMINOLOGY
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
EN 60068-2-29:1993 Environmental testing - Part 2: Tests - Test Eb and guidance: Bump
EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
EN 61000-4-4:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012)
CISPR 11:2015 RLV Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
IEC 60068-2-29:1987 Environmental testing. Part 2: Tests. Test Eb and guidance: Bump
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
EN 61000-4-6:2014/AC:2015 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013)
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
EN 60068-2-32:1993 Basic environmental testing procedures - Part 2: Tests - Test Ed: Free fall
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
EN 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
EN 13763-6 : 2003 EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 6: DETERMINATION OF RESISTANCE TO CRACKING OF INSULATION OF LEADING WIRES AT LOW TEMPERATURES
1994/9/EC : 1994 DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

View more information
US$330.61
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.