• There are no items in your cart

BS EN 13836:2006

Current
Current

The latest, up-to-date edition.

Gas fired central heating boilers. Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

09-29-2006

Foreword
1 Scope
2 Normative references
3 Terms and definitions
  3.1 Combustible gases
  3.2 Constituent parts of the boiler
  3.3 Operation of the boiler
4 Classification of boilers
  4.1 Gases and categories
  4.2 Classification according to the mode of evacuation of
       the combustion products
  4.3 Classification according to operating conditions
  4.4 Modular boiler
5 Constructional requirements
  5.1 General
  5.2 Conversion to different gases
  5.3 Materials and method of construction
  5.4 Design
  5.5 Use and servicing
  5.6 Connections to the gas and water pipes
  5.7 Soundness
  5.8 Supply of combustion air and the evacuation of the
       combustion products
  5.9 Checking the state of operation
  5.10 Drainage
  5.11 Electrical equipment
  5.12 Operational safety in the event of failure of the
       auxiliary energy
  5.13 Adjusting, control and safety devices
  5.14 Burners
  5.15 Pressure test points
  5.16 Chemical composition of the condensate for
       low-temperature boilers
6 Operational requirements
  6.1 General
  6.2 Soundness
  6.3 Nominal, maximum and minimum heat inputs, and nominal
       output
  6.4 Safety of operation
  6.5 Adjusting, control and safety devices
  6.6 Combustion
  6.7 Useful efficiencies
  6.8 Criteria for condensation in the flue
  6.9 Resistance of materials to pressure
  6.10 Hydraulic resistance
  6.11 Combustion air and flue dampers
  6.12 Condensation in a standard boiler
7 Test methods
  7.1 General
  7.2 Soundness
  7.3 Nominal, maximum and minimum heat inputs and nominal
       output
  7.4 Safety of operation
  7.5 Adjusting, control and safety devices
  7.6 Combustion
  7.7 Useful efficiencies
  7.8 Criteria for condensation in the flue
  7.9 Resistance of materials to pressure
  7.10 Hydraulic resistance
  7.11 Combustion air and flue dampers
  7.12 Condensation in a standard boiler
8 Marking and instructions
  8.1 Marking of the boiler
  8.2 Instructions
  8.3 Presentation
Annex A (informative) National situations
Annex B (informative) Special national conditions
Annex C (informative) A-deviations
Annex D (informative) Practical method of calibrating the
                       test rig to enable the heat loss Dp
                       to be determined
Annex E (informative) Main symbols and abbreviations used
                       within this European Standard
Annex F (informative) Compilations of test conditions used
                       within this European Standard
Annex G (informative) Valving
Annex H (informative) Determination of the heat losses from
                       the test rig of the indirect method and
                       the contributions of the circulating pump
                       of the test rig
Annex I (informative) Means of determining the ignition time at
                       full rate
Annex J (informative) Example of calculation of the weighting
                       factors for a boiler with several rates
Annex K (informative) Calculation of conversions of NO[x]
Annex L (informative) Use of test gases
Annex ZA (informative) Clauses of this European Standard addressing
                       essential requirements or provisions of
                       EU Directives
Bibliography

Describes requirements and test methods concerning, in particular, the construction, safety, fitness for purpose, and rational use of energy, as well as the classification and marking of gas-fired central heating boilers that are fitted with atmospheric burners, fan assisted atmospheric burners or fully premixed burners, and are hereafter referred to as 'boilers'.

Committee
GSE/29
DevelopmentNote
Supersedes 00/705373 DC (10/2006)
DocumentType
Standard
Pages
142
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
NBN EN 13836 : 2007 Identical
NEN EN 13836 : 2006 Identical
UNE-EN 13836:2007 Identical
I.S. EN 13836:2006 Identical
SN EN 13836 : 2007 Identical
NF EN 13836 : 2006 Identical
EN 13836:2006 Identical
NS EN 13836 : 1ED 2006 Identical
UNI EN 13836 : 2006 Identical
DIN EN 13836:2007-06 Identical

EN 676:2003+A2:2008/AC:2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
ISO 2553:2013 Welding and allied processes Symbolic representation on drawings Welded joints
IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
EN 50165 : 97 AMD 1 2001 ELECTRICAL EQUIPMENT ON NON-ELECTRIC APPLIANCES FOR HOUSEHOLD AND SIMILAR PURPOSES - SAFETY REQUIREMENTS
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EN 12067-2:2004 Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 1643:2014 Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves
IEC 60259:1968 Miscellaneous lamps and ballasts
EN 297:1994/A2:1996/AC:2006 GAS-FIRED CENTRAL HEATING BOILERS - TYPE B[11] AND B[11BS] BOILERS FITTED WITH ATMOSPHERIC BURNERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
EN 15417:2006 Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input greater than 70 kW but not exceeding 1000 kW
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
EN 12067-1 : 98 AMD 1 2003 GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 1: PNEUMATIC TYPES
EN 1092-3:2003/AC:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
EN ISO 4063:2010 Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)
EN 656:1999/A1:2006 GAS-FIRED CENTRAL HEATING BOILERS - TYPE B BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW BUT NOT EXCEEDING 300 KW
EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
EN 161:2011+A3:2013 Automatic shut-off valves for gas burners and gas appliances
EN 1854:2010 Pressure sensing devices for gas burners and gas burning appliances
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
EN 125:2010+A1:2015 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices
EN 126:2012 Multifunctional controls for gas burning appliances
EN 22553:1994 Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992)
ISO 857-1:1998 Welding and allied processes Vocabulary Part 1: Metal welding processes
CEN/TR 1749:2014 European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
CR 1404:1994 Determination of emissions from appliances burning gaseous fuels during type-testing
CR 1472:1997 General guidance for the marking of gas appliances
92/42/EEC : 1992 AMD 5 2013 COUNCIL DIRECTIVE 92/42/EEC OF 21 MAY 1992 ON EFFICIENCY REQUIREMENTS FOR NEW HOT-WATER BOILERS FIRED WITH LIQUID OR GASEOUS FUELS
ISO 3166-1:2013 Codes for the representation of names of countries and their subdivisions Part 1: Country codes
EN 303-7:2006 Heating boilers - Part 7: Gas-fired central heating boilers equipped with a forced draught burner of nominal heat output not exceeding 1 000 kW
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
EN 88:1991/A1:1996 PRESSURE GOVERNORS FOR GAS APPLIANCES FOR INLET PRESSURE UP TO 200 MBAR
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 4063:2009 Welding and allied processes — Nomenclature of processes and reference numbers
EN 1092-2:1997 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN 1561:2011 Founding - Grey cast irons
1990/396/EEC : 1990 COUNCIL DIRECTIVE OF 29 JUNE 1990 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO APPLIANCES BURNING GASEOUS FUELS
EN 257:2010 Mechanical thermostats for gas-burning appliances

View more information
US$402.48
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.