BS EN 13986 : 2004
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
01-01-2004
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Performance characteristics required for wood-based
panels for use in construction
5 Determination of the performance characteristics
6 Assessment and verification of constancy of
performance - AVCP
7 Marking
Annex A (normative) - Technical classes for wood-based
panels
Annex B (normative) - Formaldehyde classes
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the EU
Construction Products Regulation
Bibliography
Describes wood-based panels for use in construction and specifies the relevant characteristics and the appropriate test methods to determine these characteristics for wood-based panels, unfaced, overlaid, veneered or coated.
Committee |
B/541
|
DevelopmentNote |
Supersedes 00/107872 DC (09/2002) 2004 Edition Re-Issued in May 2015 & incorporates AMD 1 2015. (05/2015)
|
DocumentType |
Standard
|
Pages |
72
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNE-EN 13986:2006 | Identical |
NS EN 13986 : 2002 | Identical |
NF EN 13986 : 2005 + A1 2015 | Identical |
EN 13986:2004 | Identical |
DIN EN 13986:2015-06 | Identical |
SN EN 13986 : 2004 | Identical |
NBN EN 13986 : 2004 + A1 2015 | Identical |
I.S. EN 13986:2004 | Identical |
NEN EN 13986 : 2004 + A1 2015 | Identical |
UNI EN 13986 : 2005 | Identical |
12/30263952 DC : 0 | BS EN 61048:2006+A1 - AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS |
14/30277336 DC : 0 | BS 8605-1 - EXTERNAL TIMBER CLADDING - PART 1: METHOD OF SPECIFYING |
08/30143158 DC : DRAFT AUG 2008 | BS 644 - TIMBER WINDOWS - FULLY FINISHED FACTORY ASSEMBLED WINDOWS OF VARIOUS TYPES - SPECIFICATION |
08/30140202 DC : 0 | BS 8103-3 - STRUCTURAL DESIGN OF LOW-RISE BUILDINGS - PART 3: CODE OF PRACTICE FOR TIMBER FLOORS AND ROOFS FOR HOUSING |
BS 8203:2017 | Code of practice for installation of resilient floor coverings |
BS 8203(2001) : 2001 | CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
BS 5385-3:2014 | Wall and floor tiling Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions. Code of practice |
BS 1088-1:2003 | Marine plywood Requirements |
BS 8605-1:2014 | External timber cladding Method of specifying |
BS 644:2012 | Timber windows and doorsets. Fully finished factory-assembled windows and doorsets of various types. Specification |
BS 644:2009 | Timber windows. Fully finished factory-assembled windows of various types. Specification |
BS 8103-3:2009 | Structural design of low-rise buildings Code of practice for timber floors and roofs for housing |
BS 8201:2011 | Code of practice for installation of flooring of wood and wood-based panels |
12/30254626 DC : 0 | PD 6693-1 - RECOMMENDATIONS FOR THE DESIGN OF STRUCTURES TO BS EN 1995 EUROCODE 5 FOR TIMBER STRUCTURES (REVISION OF BS 5268) |
11/30209204 DC : 0 | BS 8201 - CODE OF PRACTICE FOR INSTALLATION OF FLOORING OF WOOD AND WOOD-BASED PANELS |
14/30283603 DC : 0 | BS 5385-3 - WALL AND FLOOR TILING - PART 3: DESIGN AND INSTALLATION OF INTERNAL ANDEXTERNAL CERAMIC AND MOSAIC FLOOR TILING IN NORMAL CONDITIONS - CODE OF PRACTICE |
12/30218393 DC : 0 | BS 644 - TIMBER WINDOWS AND DOORSETS - FULLY FINISHED FACTORY-ASSEMBLED WINDOWS AND DOORSETS OF VARIOUS TYPES - SPECIFICATION |
BS 6100-8:2007 | Building and civil engineering. Vocabulary Work with timber and wood-based panels |
09/30174199 DC : 0 | BS 8203:2001+A1:2009 - CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
BIP 2198 : 2012 | CONCISE EUROCODE FOR DESIGN OF TIMBER STRUCTURES: BS EN 1995: EUROCODES 5 |
PD 6693-1:2012 | Recommendations for the design of timber structures to Eurocode 5: Design of timber structures General. Common rules and rules for buildings |
16/30348805 DC : 0 | BS 8203 - CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
EN 717-2:1994/AC:2002 | WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD |
EN 13353:2008+A1:2011 | Solid wood panels (SWP) - Requirements |
EN 321:2001 | Wood-based panels - Determination of moisture resistance under cyclic test conditions |
EN 634-1:1995 | Cement-bonded particleboards - Specification - Part 1: General requirements |
EN 335-2:2006 | Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
EN 120:1992 | Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method |
ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
EN 1087-1:1995 | Particleboards - Determination of moisture resistance - Part 1: Boil test |
EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
EN 14755:2005 | Extruded particleboards - Specifications |
EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
EN 14279:2004+A1:2009 | Laminated Veneer Lumber (LVL) - Definitions, classification and specifications |
89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
CEN/TS 13354 : 2003 | SOLID WOOD PANELS - BONDING QUALITY - TEST METHOD |
EN 596:1995 | Timber structures - Test methods - Soft body impact test of timber framed walls |
EN 317:1993 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
EN 300:2006 | Oriented Strand Boards (OSB) - Definitions, classification and specifications |
EN 1195:1997 | Timber structures - Test methods - Performance of structural floor decking |
EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
EN 1156:2013 | Wood-based panels - Determination of duration of load and creep factors |
EN 312:2010 | Particleboards - Specifications |
EN 622-5:2009 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
EN 12114:2000 | Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method |
EN 12524 : 2000 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES |
EN 594:2011 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
EN 325:2012 | Wood-based panels - Determination of dimensions of test pieces |
ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
EN 323:1993 | Wood-based panels - Determination of density |
EN 12369-1:2001 | Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards |
EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
EN ISO 140-3:1995/A1:2004 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: LABORATORY MEASUREMENTS OF AIRBORNE SOUND INSULATION OF BUILDING ELEMENTS |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
EN 15197:2007 | Wood-based panels - Flaxboards - Specifications |
EN 335-3:1995 | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
ISO 9001:2015 | Quality management systems — Requirements |
ENV 1099 : DRAFT 97 | PLYWOOD - BIOLOGICAL DURABILITY - GUIDANCE FOR THE ASSESSMENT OF PLYWOOD FOR USE IN DIFFERENT HAZARD CLASSES |
EN 622-3:2004 | Fibreboards - Specifications - Part 3: Requirements for medium boards |
EN 316:2009 | Wood fibre boards - Definition, classification and symbols |
EN 622-2:2004/AC:2005 | FIBREBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR HARDBOARDS |
EN 622-4:2009 | Fibreboards - Specifications - Part 4: Requirements for softboards |
EN 313-2:1999 | Plywood - Classification and terminology - Part 2: Terminology |
EN 314-2:1993 | Plywood - Bonding quality - Part 2: Requirements |
EN 633:1993 | Cement-bonded particleboards - Definition and classification |
EN 1995-1-1:2004/A2:2014 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
EN 634-2:2007 | Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions |
CEN/TR 14823:2003 | Durability of wood and wood-based products - Quantitative determination of pentachlorophenol in wood - Gas chromatographic method |
EN 383:2007 | Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners |
EN 309:2005 | Particleboards - Definition and classification |
EN 12369-2:2011 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
EN 335-1:2006 | Durability of wood and wood- based products - Definition of use classes - Part 1: General |
EN 12775:2001 | Solid wood panels - Classification and terminology |
EN 636:2012+A1:2015 | Plywood - Specifications |
EN 622-1:2003 | Fibreboards - Specifications - Part 1: General requirements |
CEN/TR 12872:2014 | Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs |
EN 314-1:2004 | Plywood - Bonding quality - Part 1: Test methods |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.