Blank Detail Specification. Fixed low power film resistors

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

05-30-2008

Publisher

British Standards Institution

Introduction
1 Characteristics and ratings
  1.1 Dimensions and ratings
  1.2 Derating curve
  1.3 Resistance range and tolerance on rated
       resistance
  1.4 Variation of resistance with temperature
       and temperature rise
  1.5 Climatic categories
  1.6 Limits for change of resistance at tests
  1.7 Non-linear properties
  1.8 Tests related to soldering
  1.9 Marking, packaging and ordering designation
  1.10 Additional information (not for inspection
       purpose)
2 Quality assessment procedures
  2.1 General
  2.2 Qualification Approval
  2.3 Quality Conformance Inspection
Annex A (normative) - Fixed sample size Qualification
                      Approval and Quality Conformance
                      Inspection test schedule for fixed
                      low power film resistors
Annex B (informative) - Letter symbols and abbreviations
Bibliography

Committee	W/-
DevelopmentNote	Supersedes BS CECC 40101(1981) and 93/215592 DC. (09/2005)
DocumentType	Standard
Pages	30
PublisherName	British Standards Institution
Status	Current
Supersedes	BS EN 140101:1997 BS CECC 40101:1981 93/215592 DC : NOV 93

Standards	Relationship
I.S. EN 140101:2008	Identical
NEN EN 140101 : 2008	Identical
DIN EN 140101:2008-08	Identical
EN 140101:2008	Identical
SN EN 140101 : 2008	Identical
NF EN 140101 : 2008	Identical

IEC 61193-2:2007	Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages
IEC 60068-2-20:2008	Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
CECC 240001 : 1996	FIXED LOW POWER FILM RESISTORS (LEADED/UNLEADED)
EN 60068-2-1:2007	Environmental testing - Part 2-1: Tests - Test A: Cold
IECQ 001002-3:2005	IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 3: APPROVAL PROCEDURES
EN 60068-2-2:2007	Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-21:2006	Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
IEC 60068-2-13:1983	Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure
IEC 60286-2:2015	Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes
HD 349 : 200S1	PREFERRED DIAMETERS OF WIRE TERMINATIONS OF CAPACITORS AND RESISTORS
EN 61760-1:2006	SURFACE MOUNTING TECHNOLOGY - PART 1: STANDARD METHOD FOR THE SPECIFICATION OF SURFACE MOUNTING COMPONENTS (SMDS)
IEC 61760-1:2006	Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs)
EN 60027-1:2006/A2:2007	LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 1: GENERAL
EN 60286-2:2015	Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes
IEC 60027-1:1992	Letters symbols to be used in electrical technology - Part 1: General
IEC 60410:1973	Sampling plans and procedures for inspection by attributes
IEC 60294:2012	Measurement of the dimensions of a cylindrical component with axial terminations
EN 61193-2 : 2007	QUALITY ASSESSMENT SYSTEMS - PART 2: SELECTION AND USE OF SAMPLING PLANS FOR INSPECTION OF ELECTRONIC COMPONENTS AND PACKAGES
EN 60068-2-21:2006	Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
IEC 60068-2-2:2007	Environmental testing - Part 2-2: Tests - Test B: Dry heat
EN 60115-1:2011/A11:2015	FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC TR 60440:1973	Method of measurement of non-linearity in resistors
EN 61340-3-1:2007	Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms
IEC 60062:2016	Marking codes for resistors and capacitors
EN 60062:2016/AC:2016-12	MARKING CODES FOR RESISTORS AND CAPACITORS (IEC 60062:2016/COR1:2016)
EN 140100:2008	Sectional Specification: Fixed low power film resistors
IEC 61340-3-1:2006	Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms
IEC 60301:2012	Preferred diameters of wire terminations of capacitors and resistors
EN 60068-2-78:2013	Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
EN 60068-2-13:1999	Environmental testing - Part 2: Tests - Test M: Low air pressure
EN 60068-2-6:2008	Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60063:2015	Preferred number series for resistors and capacitors
IEC 60068-2-1:2007	Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60286-1:2017	Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes
EN 60068-2-30:2005	Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
EN 60695-11-5:2017	Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
IEC 60695-11-5 : 2.0	FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
IEC 60695-11-5:2016	Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
IEC 60068-2-14:2009	Environmental testing - Part 2-14: Tests - Test N: Change of temperature
EN 60068-2-45:1992/A1:1993	Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents
EN 60068-2-14:2009	Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60115-1:2008	Fixed resistors for use in electronic equipment - Part 1: Generic specification
IEC 60195:2016	Method of measurement of current noise generated in fixed resistors
IEC 60068-2-30:2005	Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)