• There are no items in your cart

BS EN 14466 : 2005

Current
Current

The latest, up-to-date edition.

FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2005

Foreword
0 Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Requirements
  5.1 Safety requirements and/or protective measures
      5.1.1 General
      5.1.2 Mechanical devices
      5.1.3 Electrical facilities
      5.1.4 Thermal hazards
      5.1.5 Noise
      5.1.6 Hazards generated by materials and substances
      5.1.7 Ergonomic design principles
      5.1.8 Overspeed protection
      5.1.9 Stopping device
      5.1.10 Indication of limit pressure (p[a lim])
      5.1.11 Special tools
  5.2 Performance requirements
      5.2.1 General
      5.2.2 Hydraulic performance
      5.2.3 Vibration during operation
      5.2.4 Inclination
      5.2.5 Cold start
      5.2.6 Clutch
      5.2.7 Generator
      5.2.8 Cooling system
      5.2.9 Starting device
      5.2.10 Fuel system
      5.2.11 Corrosion
      5.2.12 Priming time
      5.2.13 Operating controls and instrumentation
      5.2.14 Number of delivery outlets
6 Verification
  6.1 Verification of safety requirements and/or measures
      6.1.1 General
      6.1.2 Mechanical devices
      6.1.3 Electrical facilities
      6.1.4 Thermal hazards
      6.1.5 Noise
      6.1.6 Hazards generated by materials and substances
      6.1.7 Ergonomic principles
      6.1.8 Overspeed protection
      6.1.9 Stopping device
      6.1.10 Indication of limit pressure (p[a lim])
      6.1.11 Special tools
  6.2 Verification of performance requirements
      6.2.1 General
      6.2.2 Hydraulic performance
      6.2.3 Vibration during operation
      6.2.4 Inclination
      6.2.5 Cold start
      6.2.6 Clutch
      6.2.7 Generator
      6.2.8 Cooling system
      6.2.9 Starting device
      6.2.10 Fuel system
      6.2.11 Corrosion
      6.2.12 Priming time
      6.2.13 Operating controls and instrumentation
      6.2.14 Number of delivery outlets
7 Classification and designation
8 Test report
9 Information for use
  9.1 General
  9.2 Signs and warning signs
  9.3 Accompanying documents
      9.3.1 General
      9.3.2 Contents
  9.4 Marking
Annex A (informative) - Example of the dimension of contour
                      of a transporting device
Annex B (informative) - Examples of technical measures for
                      noise reduction
Annex C (informative) - Example of an exhaust tail pipe (coupling)
Annex D (informative) - Guidance for acceptance tests on delivery
Annex E (normative) - Noise test code
  E.1 General
  E.2 Grade of accuracy
  E.3 Installation and mounting conditions
  E.4 Operating conditions
  E.5 Measurement uncertainties
  E.6 Declaration
Annex F (normative) - Test of inclination during operation
Annex G (normative) - Test of inclination during transport
                      (out of operation)
Annex H (normative) - Requirements for non-text safety signs
                      for use on portable pumps
  H.1 General
  H.2 Safety alert symbol
  H.3 Non-text hazard pictorials
  H.4 Dimensions
  H.5 Colours of safety signs
  H.6 Location
Annex ZA (informative) - Relationship between this European
                       Standard and the Essential Requirements
                       of EU Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
                       Standard and the Essential Requirements
                       of EU Directive 2006/42/EC
Bibliography

Applies to portable pumps using fire-fighting centrifugal pumps as defined in EN 1028, driven by an internal combustion engine and not intended to be permanently installed in fire-fighting and rescue service vehicles and not intended for prolonged unattended operation.

Committee
FSH/17/4
DevelopmentNote
Supersedes 02/540559 DC. (04/2005) 2005 Edition Re-Issued in October 2008 & incorporates AMD 1 2008. (10/2008)
DocumentType
Standard
Pages
46
PublisherName
British Standards Institution
Status
Current
Supersedes

93/68/EEC : 1993 AMD 2 1998 COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
EN ISO 14314:2009 Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004)
EN 294:1992/AC:1993 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
CISPR 12:2007+AMD1:2009 CSV Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers
1992/31/EEC : 1992 COUNCIL DIRECTIVE OF 28 APRIL 1992 AMENDING DIRECTIVE 89/336/EEC ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
EN 12639:2000/AC:2004 LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND GRADE 3 OF ACCURACY
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
EN 13202 : 2000 ERGONOMICS OF THE THERMAL ENVIRONMENT - TEMPERATURES OF TOUCHABLE HOT SURFACES - GUIDANCE FOR ESTABLISHING SURFACE TEMPERATURE LIMIT VALUES IN PRODUCT STANDARDS WITH THE AID OF EN 563
EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
EN ISO 14163 : 1998 ACOUSTICS - GUIDELINES FOR NOISE CONTROL BY SILENCERS
ISO 11546-2:1995 Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes)
EN ISO 11102-2:2009 Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 61000-6-3:2007/A1:2011/AC:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010)
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 1028-2:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements
1989/336/EEC : 1989 COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 61310-3:2008 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
IEC 61310-3:2007 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
ISO 11102-1:1997 Reciprocating internal combustion engines Handle starting equipment Part 1: Safety requirements and tests
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN ISO 11820 : 1996 ACOUSTICS - MEASUREMENTS ON SILENCERS IN SITU
EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
EN 563:1994/A1:1999/AC:2000 SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES
ISO 11820:1996 Acoustics — Measurements on silencers in situ
ISO 9244:2008 Earth-moving machinery Machine safety labels General principles
IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
EN ISO 11546-2:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
ISO 14314:2004 Reciprocal internal combustion engines Recoil starting equipment General safety requirements
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN 659:2003+A1:2008/AC:2009 PROTECTIVE GLOVES FOR FIREFIGHTERS
EN 61000-6-2:2005/corrigendum:2005 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
CISPR 61000-6-3:1996 Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial and light-industrial environments
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 62079:2001 Preparation of instructions - Structuring, content and presentation
EN 547-3:1996+A1:2008 Safety of machinery - Human body measurements - Part 3: Anthropometric data
EN 60254-1:2005 Lead acid traction batteries - Part 1: General requirements and methods of tests
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
IEC 62079:2001 Preparation of instructions - Structuring, content and presentation
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN 1028-1:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements
ISO 11203:1995 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
ISO 14163:1998 Acoustics — Guidelines for noise control by silencers
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
ISO 11546-1:1995 Acoustics Determination of sound insulation performances of enclosures Part 1: Measurements under laboratory conditions (for declaration purposes)
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 55012:2007/A1:2009 VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF OFF-BOARD RECEIVERS
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
EN ISO 11546-1:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
1998/37/EC : 1998 DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN ISO 11102-1:2009 Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997)
EN ISO 11203:2009 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
ISO 11102-2:1997 Reciprocating internal combustion engines Handle starting equipment Part 2: Method of testing the angle of disengagement
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

View more information
US$294.67
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.