BS EN 1458-1:2011
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
12-31-2011
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Construction and design requirements
6 Operational safety
7 Marking
Annex A (informative) - National situations
Annex B (normative) - Special national conditions
Annex ZA (informative) - Relationship between this European
and the Essential Requirements of EU Directive
90/396/EEC on the approximation of the laws of Member
States concerning gas appliances
Bibliography
Describes the requirements and test methods for the safety, and marking of domestic direct gas-fired tumble dryers, of types B[22D] and B[23D], of nominal heat input not exceeding 6 kW, hereafter referred to as "appliances".
Cette Norme européenne définit les exigences et les méthodes d\'essais relatives à la construction, la sécurité et le marquage des sèche-linge domestiques à tambour rotatif à chauffage direct utilisant les combustibles gazeux, de type B22D et B23D, de débit calorifique nominal ne dépassant pas 6 kW, désignés, ci après, sous le terme \'appareils\'. Cette Norme européenne ne s\'applique pas : a) aux appareils à combustion catalytique ; b) aux appareils conçus exclusivement à des fins industrielles ; c) aux appareils destinés à être utilisés dans des locaux où règnent certaines conditions spécifiques, telles que la présence d\'atmosphère corrosive ou explosive ; d) aux appareils du type à condensation à l\'intérieur desquels l\'air chauffé et les produits de combustion utilisés pour le séchage sont déshumidifiés par refroidissement à l\'eau ou à l\'air ; e) aux appareils destinés à être utilisés dans les véhicules ou à bord des bateaux ou des avions. Cette Norme européenne couvre uniquement les essais de type.
Committee |
GSE/37
|
DevelopmentNote |
Supersedes BS 5258-17(1992). (01/2000) Supersedes 94/707432 DC. (09/2005) Supersedes 11/30238482 DC. (12/2011)
|
DocumentType |
Standard
|
Pages |
102
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
I.S. EN 1458-1:2011 | Identical |
NEN EN 1458-1 : 2011 | Identical |
NS EN 1458-1 : 2011 | Identical |
NBN EN 1458-1 : 2012 | Identical |
UNE-EN 1458-1:2012 | Identical |
EN 1458-1:2011 | Identical |
NF EN 1458-1 : 2012 | Identical |
UNI EN 1458-1 : 2012 | Identical |
SN EN 1458-1 : 2012 | Identical |
DIN EN 1458-1:2012-02 | Identical |
BS 7624:2004 | Installation and maintenance of domestic direct gas-fired tumble dryers of up to 6 kW heat input (2nd and 3rd family gases). Specification |
IEC 60335-2-11:2008+AMD1:2012+AMD2:2015 CSV | Household and similar electrical appliances - Safety - Part 2-11:Particular requirements for tumble dryers |
IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV | Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
IEC 60730-2-9:2015 RLV | Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls |
ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
EN 10226-2:2005 | Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation |
EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
EN 60730-2-9:2010 | Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
2009/142/EC : 2009 | DIRECTIVE 2009/142/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 30 NOVEMBER 2009 RELATING TO APPLIANCES BURNING GASEOUS FUELS (TEXT WITH EEA RELEVANCE) |
EN ISO 3166-1:2014 | Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) |
EN 161:2011+A3:2013 | Automatic shut-off valves for gas burners and gas appliances |
ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
EN 125:2010+A1:2015 | Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
EN 126:2012 | Multifunctional controls for gas burning appliances |
EN 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
CEN/TR 1749:2014 | European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) |
EN 60335-2-102:2016 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
ISO 3166-1:2013 | Codes for the representation of names of countries and their subdivisions Part 1: Country codes |
EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN ISO 6976:2016 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
EN 88-1:2011+A1:2016 | Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa |
ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
EN 60034-5:2001/A1:2007 | ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
1990/396/EEC : 1990 | COUNCIL DIRECTIVE OF 29 JUNE 1990 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO APPLIANCES BURNING GASEOUS FUELS |
EN 257:2010 | Mechanical thermostats for gas-burning appliances |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.