Calcium aluminate cement. Composition, specifications and conformity criteria

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

02-28-2007

Publisher

British Standards Institution

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Calcium aluminate cement (CAC)
5 Constituents
  5.1 Calcium aluminate cement clinker
  5.2 Grinding aids
6 Cement type and composition
7 Mechanical, physical and chemical requirements
  7.1 Compressive strength
  7.2 Initial setting time
  7.3 Chemical requirements
8 Standard designation
9 Conformity criteria
  9.1 General requirements
  9.2 Conformity criteria and evaluation procedure
Annex A (informative) Guidance for the use of calcium
                       aluminate cement in concrete and
                       mortar
  A.1 Introduction
  A.2 Specific characteristics of calcium aluminate
       cement
  A.3 Hydraulic properties
  A.4 Production of calcium aluminate cement concrete
  A.5 Admixtures
  A.6 Use of calcium aluminate cement in
       particular conditions
  A.7 Rapid test to estimate the minimum long term
       strength of calcium aluminium cement concretes
  A.8 Bibliography
Annex B (informative) Water-soluble hexavalent chromium
Annex ZA (informative) Clauses of this European Standard
                       addressing the provisions of
                       EU Construction Products Directive
  ZA.1 Scope and relevant characteristics
  ZA.2 Procedure for the attestation of conformity
       of products
  ZA.3 CE marking and labelling
Bibliography

Provides a general definition of calcium aluminate cement and its composition.

This European Standard gives a general definition of calcium aluminate cement and its composition. It includes requirements for the mechanical, physical and chemical properties and also states the conformity criteria and the related rules.

Calcium aluminate cement used as a constituent material of formulated mixes for specific applications (e.g. dry mixes) is outside the scope of this European Standard.

NOTE Guidance for the correct use of calcium aluminate cement in concrete and mortars is given in Annex A.

Committee	B/516/6
DevelopmentNote	Supersedes BS 915-2(1972). (02/2006) Supersedes 03/303925 DC. (03/2006)
DocumentType	Standard
Pages	38
PublisherName	British Standards Institution
Status	Current
Supersedes	BS 915-2:1972 03/303925 DC : DRAFT MAR 2003

Standards	Relationship
EN 14647:2005	Identical
NF EN 14647 : 2006	Identical
DIN EN 14647:2006-01	Identical
NBN EN 14647 : 2006 COR 2006	Identical
NEN EN 14647 : 2005 C1 2007	Identical
NS EN 14647 : 2005 AC 2006	Identical
I.S. EN 14647:2005	Identical
UNI EN 14647 : 2006	Identical
UNE-EN 14647:2006	Identical
EN 14647:2005/AC:2006	Identical
SN EN 14647 : 2005	Identical
DIN EN 14647 E : 2006	Identical

BS 8204-3(2004) : 2004	SCREEDS, BASES AND IN SITU FLOORINGS - PART 3: POLYMER MODIFIED CEMENTITIOUS LEVELLING SCREEDS AND WEARING SCREEDS - CODE OF PRACTICE
BS 8204-2(2003) : 2003	SCREEDS, BASES AND IN SITU FLOORINGS - PART 2: CONCRETE WEARING SURFACES - CODE OF PRACTICE
BS 8204-1(2003) : 2003	SCREEDS, BASES AND IN SITU FLOORINGS - PART 1: CONCRETE BASES AND CEMENTITIOUS LEVELLING SCREEDS TO RECEIVE FLOORINGS - CODE OF PRACTICE
BS 5385-2:2015	Wall and floor tiling Design and installation of external ceramic, natural stone and mosaic wall tiling in normal conditions. Code of practice
BS 5385-1:2009	Wall and floor tiling Design and installation of ceramic, natural stone and mosaic wall tiling in normal internal conditions. Code of practice
BS 5385-3:2014	Wall and floor tiling Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions. Code of practice
BS 5385-3:2007	Wall and floor tiling Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions. Code of practice
09/30193137 DC : 0	BS 8204-2:2003+A1:2009 - SCREEDS, BASES AND IN-SITU FLOORINGS - PART 2: CONCRETE WEARING SURFACES - CODE OF PRACTICE
09/30193134 DC : 0	BS 8204-1:2003+A1:2009 - SCREEDS, BASES AND IN-SITU FLOORINGS - PART 1: CONCRETE BASES AND CEMENT SAND LEVELLING SCREEDS TO RECEIVE FLOORINGS - CODE OF PRACTICE
ACI 225R : 2016	GUIDE TO THE SELECTION AND USE OF HYDRAULIC CEMENTS
BS 5385-5:2009	Wall and floor tiling Design and installation of terrazzo, natural stone and agglomerated stone tile and slab flooring. Code of practice
BS 1251:2015	Open-fireplace components
14/30283603 DC : 0	BS 5385-3 - WALL AND FLOOR TILING - PART 3: DESIGN AND INSTALLATION OF INTERNAL ANDEXTERNAL CERAMIC AND MOSAIC FLOOR TILING IN NORMAL CONDITIONS - CODE OF PRACTICE
ACI 225R : 2019	GUIDE TO THE SELECTION AND USE OF HYDRAULIC CEMENTS
13/30157623 DC : 0	BS 1251 - OPEN-FIREPLACE COMPONENTS
09/30193139 DC : 0	BS 8204-3:2004+A1:2009 - SCREEDS, BASES AND IN-SITU FLOORINGS - PART 3: POLYMER MODIFIED CEMENTITIOUS LEVELLING SCREEDS AND WEARING SCREEDS - CODE OF PRACTICE
07/30043554 DC : 0	BS 5385-5 - WALL AND FLOOR TILING - PART 5: DESIGN AND INSTALLATION OF TERRAZZO, NATURAL STONE AND AGGLOMERATED STONE TILES AND SLABS - CODE OF PRACTICE
14/30288665 DC : 0	BS 5385-2 - WALL AND FLOOR TILING - PART 2: DESIGN AND INSTALLATION OF EXTERNAL CERAMIC, NATURAL STONE AND MOSAIC WALL LING IN NORMAL CONDITIONS - CODE OF PRACTICE

93/68/EEC : 1993 AMD 2 1998	COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
EN 196-7:2007	Methods of testing cement - Part 7: Methods of taking and preparing samples of cement
EN 196-2:2013	Method of testing cement - Part 2: Chemical analysis of cement
EN 197-1:2011	Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 197-2:2014	Cement - Part 2: Conformity evaluation
89/106/EEC : 1988	COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
BS EN 206-1:2000	Concrete Specification, performance, production and conformity
BS 8500-2(2006) : 2006	CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206-1 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE
EN 1008:2002	Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
EN 196-1:2016	Methods of testing cement - Part 1: Determination of strength
EN 12620:2002+A1:2008	Aggregates for concrete
EN 13139:2002/AC:2004	AGGREGATES FOR MORTAR
EN 1992-1-1:2004/A1:2014	EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 196-3:2016	Methods of testing cement - Part 3: Determination of setting times and soundness
EN 934-2:2009+A1:2012	Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling

View more information

US$261.13

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

BS EN 14647:2005

Current

Table of Contents

Abstract

Scope

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription