• There are no items in your cart

BS EN 15033:2006

Current
Current

The latest, up-to-date edition.

Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-30-2009

Foreword
1 Scope
2 Normative references
3 Terms and definitions
  3.1 Water heater
  3.2 Characteristics of the gas and electrical supplies
  3.3 gas circuit
  3.4 Control and safety devices
  3.5 Stages of operational and safety sequence
  3.6 Burners and ignition devices
  3.7 combustion circuit
  3.8 Water circuit
  3.9 Soundness
  3.10 Operation
  3.11 Appliance characteristics
4 Classification of storage water heaters
  4.1 Type C
5 Construction requirement
  5.1 General
  5.2 Adjusting, control and safety devices
  5.3 Burners
  5.4 Discharge of condensate
6 Operational requirements and tests
  6.1 Carrying out the tests
  6.2 Vibration resistance
  6.3 Soundness
  6.4 Nominal heat input
  6.5 Temperatures
  6.6 Ignition - Cross-lighting - Flame stability
  6.7 Resistance to wind
  6.8 Operation of water temperature safety devices
  6.9 Nominal capacity
  6.10 Ignition devices
  6.11 Opening and safety times
  6.12 Fan supervision
7 Rational use of energy
  7.1 Efficiency
  7.2 Stand-by consumption
8 Fitness for purpose - Heating-up time
  8.1 Requirements
  8.2 Tests
9 Marking and instructions
  9.1 Appliance marking
  9.2 Instructions
  9.3 Language
Annex A (informative) - National situations in the member
        states
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 90/396/EEC
Bibliography

Describes the specifications and test methods for the construction, safety, rational use of energy and fitness for purpose, environment, classification and marking of room sealed storage water heaters for the production of sanitary hot water using LPG.

Committee
GSE/24
DevelopmentNote
Supersedes 04/30124766 DC. (03/2007)
DocumentType
Standard
Pages
64
PublisherName
British Standards Institution
Status
Current
Supersedes

ISO 10239:2014 Small craft Liquefied petroleum gas (LPG) systems
IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
EN 12864:2001/A3:2009 LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
EN 50165 : 97 AMD 1 2001 ELECTRICAL EQUIPMENT ON NON-ELECTRIC APPLIANCES FOR HOUSEHOLD AND SIMILAR PURPOSES - SAFETY REQUIREMENTS
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 89:2015 Gas-fired storage water heaters for the production of domestic hot water
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
IEC 60335-2-21:2012 Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
EN 13878 : 2003 LEISURE ACCOMMODATION VEHICLES - TERMS AND DEFINITIONS
EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
EN 161:2011+A3:2013 Automatic shut-off valves for gas burners and gas appliances
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
EN 1487:2014 Building valves - Hydraulic safety groups - Tests and requirements
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
EN 60335-2-21:2003/corrigendum Oct. 2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR STORAGE WATER HEATERS
EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
EN 125:2010+A1:2015 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 126:2012 Multifunctional controls for gas burning appliances
EN 1949:2011+A1:2013 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
CEN/TR 1749:2014 European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
EN 624:2011 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
ISO 3166-1:2013 Codes for the representation of names of countries and their subdivisions Part 1: Country codes
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 549:1994 Rubber materials for seals and diaphragms for gas appliances and gas equipment
ISO 301:2006 Zinc alloy ingots intended for castings
EN ISO 10239:2017 Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
1990/396/EEC : 1990 COUNCIL DIRECTIVE OF 29 JUNE 1990 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO APPLIANCES BURNING GASEOUS FUELS

View more information
US$311.44
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.