Name: BS EN 15069:2008
Brand: BSI

Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel

Published date

04-30-2008

Publisher

British Standards Institution

These valves are suitable for connection of the fixed gas supply system to domestic appliances inside or outside a dwelling using 2nd or 3rd Family gases and at a pressure of up to and including 0,5 bar. These valves are designed for the use with either movable appliances or for the connection of fixed appliances.

Committee	GSE/42
DevelopmentNote	Supersedes 04/30124785 DC. (05/2008)
DocumentType	Standard
PublisherName	British Standards Institution
Status	Current
Supersedes	04/30124785 DC : 0

Standards	Relationship
EN 15069:2008	Identical

BS 6891:2015

Specification for the installation and maintenance of low pressure gas installation pipework of up to 35 mm (R1¼) on premises

93/68/EEC : 1993 AMD 2 1998	COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
EN 751-3:1996/AC:1997	Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes
EN 682:2002/A1:2005	ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS
ISO 691:2005	Assembly tools for screws and nuts Wrench and socket openings Tolerances for general use
EN 1503-4:2016	Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards
EN 1775:2007	Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
EN 1503-3:2000/AC:2001	VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 3: CAST IRONS SPECIFIED IN EUROPEAN STANDARDS
EN 377:1993/A1:1996	LUBRICANTS FOR APPLICATIONS IN APPLIANCES AND ASSOCIATED CONTROLS USING COMBUSTIBLE GASES EXCEPT THOSE DESIGNED FOR USE IN INDUSTRIAL PROCESSES
89/106/EEC : 1988	COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
NFD 36 121 : 2009 AMD 1 2011	HOUSEHOLD ECONOMY - END FITTINGS WITH SEAL GASKET FOR CORRUGATED METALLIC FLEXIBLE PIPING FOR THE EXTERNAL CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS DISTRIBUTED BY NETWORKS
EN 751-2:1996	Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
ISO 11925-2:2010	Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
EN 1503-1:2000	Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards
EN ISO 9227:2017	Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
EN 10277-3:2008	Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels
DIN 3383-1:2013-08	CONNECTION OF GAS APPLIANCES - PART 1: GAS CONNECTION VALVES, SAFETY HOSE ASSEMBLIES
EN ISO 228-1:2003	Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
UNE 60715-1:2013	Flexible hoses for connection of gas receiving installations to gas-fired appliances. Metal hose assemblies with safety gas connection valves and thread. Part 1: Elastomeric packed metallic stripwound flexible hose assemblies.
ISO 7-1:1994	Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
EN 437:2003+A1:2009	Test gases - Test pressures - Appliance categories
UNE 60715-2:2013	Flexible hoses for connection of gas receiving installations to gas-fired appliances. Metal hose assemblies with safety gas connection valves and thread. Part 2: Stainless steel flexible hose assemblies.
EN 10222-3:2017	Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
EN ISO 9001:2015	Quality management systems - Requirements (ISO 9001:2015)
EN 10222-5:2017	Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
UNI 9891 : 1998	CORRUGATED FLEXIBLE SAFETY METALLIC HOSE ASSEMBLIES FOR THE CONNECTION OF GAS APPLIANCES FOR DOMESTIC AND SIMILAR USES
EN 10222-4:2017	Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
EN 10222-2:2017	Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
NFD 36 125 : 2009 AMD 1 2011	HOUSEHOLD ECONOMY - END FITTINGS WITH SEAL GASKET FOR CORRUGATED METALLIC FLEXIBLE PIPING FOR THE EXTERNAL CONNECTION OF DOMESTIC APPLIANCES USING BUTANE AND PROPANE FROM CYLINDERS
ISO 9001:2015	Quality management systems — Requirements
EN 751-1:1996	Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
NBN D 04 002 : 2003	FLEXIBLE HOSES WITH MECHANICAL UNIONS FOR THE CONNECTION OF MOVABLE DOMESTIC COOKING APPLIANCES USING NATURAL GAS
ISO 9227:2017	Corrosion tests in artificial atmospheres — Salt spray tests
ISO 9000:2015	Quality management systems — Fundamentals and vocabulary
EN 60335-1:2012/A13:2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
EN 549:1994	Rubber materials for seals and diaphragms for gas appliances and gas equipment
EN 331:2015	Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
EN 10226-1:2004	Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
EN ISO 11925-2:2010/AC:2011	REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
ISO 228-1:2000	Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
BS 669-1:1989	Flexible hoses, end fittings and sockets for gas burning appliances Specification for strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2nd family gases
EN ISO 9000:2015	Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
EN 14800:2007	Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
DIN 3383-2:2013-08	CONNECTION OF GAS APPLIANCES - PART 2: HOSE ASSEMBLIES FOR RIGID CONNECTION
EN 10222-1:2017	Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
ISO 1817:2015	Rubber, vulcanized or thermoplastic Determination of the effect of liquids