• There are no items in your cart

BS EN 15167-1:2006

Current
Current

The latest, up-to-date edition.

Ground granulated blast furnace slag for use in concrete, mortar and grout Definitions, specifications and conformity criteria
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

10-31-2006

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Constituents
5 Specifications
  5.1 General
  5.2 Chemical requirements
  5.3 Physical requirements
      5.3.1 Fineness
      5.3.2 Requirements when combined with the test cement
  5.4 Other requirement
      5.4.1 Durability requirements
      5.4.2 Release of dangerous substances and emission of
            radioactivity
  5.5 Information to be supplied upon request
6 Packaging and labelling
7 Sampling
8 Evaluation of conformity
  8.1 General requirements
  8.2 Statistical conformity criteria
      8.2.1 General
      8.2.2 Inspection by variables
      8.2.3 Inspection by attributes
  8.3 Single result conformity criteria
Annex A (normative) Method of determining the moisture content
                    of ground granulated blastfurnace slag
  A.1 Principle
  A.2 Apparatus
      A.2.1 Balance, capable of weighing to an accuracy of 0,001 g
      A.2.2 Shallow container of about 20 g capacity
      A.2.3 Electric oven with natural ventilation controlled at
            (110 +/- 5) degree C
      A.2.4 Desiccator containing dried magnesium perchlorate
  A.3 Procedure
  A.4 Calculation
  A.5 Report
Annex ZA (informative) Clauses of this European Standard addressing
                       essential requirements or other provisions of
                       EU Directives
Bibliography

Describes requirements for the chemical and physical properties as well as quality control procedures for ground granulated blastfurnace slag for use as a type 2 addition in the production of concrete, including in particular cast-in-situ or prefabricated structural concrete conforming to EN 206-1.

This European Standard specifies requirements for the chemical and physical properties as well as quality control procedures for ground granulated blastfurnace slag for use as a type II addition in the production of concrete, including in particular cast-in-situ or prefabricated structural concrete conforming to EN 206-1. Ground granulated blastfurnace slag conforming to this European Standard may also be used in mortars and grouts.

Ground granulated blastfurnace slag containing any added materials other than grinding aids, is not within the scope of this European Standard. It is also not within the scope of this European Standard to specify provisions governing the practical application of ground granulated blastfurnace slag in the production of concrete, mortar or grout, i.e. requirements concerning composition, mixing, placing, curing etc. As regards such provisions, reference should be made to other European or national standards, such as EN 206-1.

Committee
B/517/4
DevelopmentNote
Together with BS EN 15167-2, supersedes BS 6699(1992). Supersedes 05/30130592 DC. (10/2006)
DocumentType
Standard
Pages
24
PublisherName
British Standards Institution
Status
Current
Supersedes

14/30291598 DC : 0 BS 8500-2 - CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE
BS 8204-2(2003) : 2003 SCREEDS, BASES AND IN SITU FLOORINGS - PART 2: CONCRETE WEARING SURFACES - CODE OF PRACTICE
BS 5834-1:2009 Surface boxes, guards and underground chambers for the purposes of utilities Specification for guards and plinths
BS 8204-1(2003) : 2003 SCREEDS, BASES AND IN SITU FLOORINGS - PART 1: CONCRETE BASES AND CEMENTITIOUS LEVELLING SCREEDS TO RECEIVE FLOORINGS - CODE OF PRACTICE
BS 8297:2017 Design, manufacture and installation of architectural precast concrete cladding. Code of practice
BS 5385-3:2014 Wall and floor tiling Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions. Code of practice
09/30209269 DC : 0 BS 5911-6:2004+A1 - CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 6: SPECIFICATION FOR ROAD GULLIES AND GULLY COVER SLABS
09/30193137 DC : 0 BS 8204-2:2003+A1:2009 - SCREEDS, BASES AND IN-SITU FLOORINGS - PART 2: CONCRETE WEARING SURFACES - CODE OF PRACTICE
09/30193134 DC : 0 BS 8204-1:2003+A1:2009 - SCREEDS, BASES AND IN-SITU FLOORINGS - PART 1: CONCRETE BASES AND CEMENT SAND LEVELLING SCREEDS TO RECEIVE FLOORINGS - CODE OF PRACTICE
BS 5911-4(2002) : 2002 CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 4: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE INSPECTION CHAMBERS
BS 5834-4:2011 Surface boxes, guards and underground chambers for the purposes of utilities Specification for utility chambers
BS PAS 8810(2016) : 2016 TUNNEL DESIGN - DESIGN OF CONCRETE SEGMENTAL TUNNEL LININGS - CODE OF PRACTICE
09/30209209 DC : 0 BS 5911-3 - CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 3: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE MANHOLES AND SOAKAWAYS (COMPLEMENTARY TO BS EN 1917:2002)
17/30342957 DC : 0 BS 8297 - DESIGN, MANUFACTURE AND INSTALLATION OF ARCHITECTURAL PRECAST CONCRETE CLADDING - CODE OF PRACTICE
09/30209267 DC : 0 BS 5911-5:2004+A1 - CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 5: SPECIFICATION FOR PRESTRESSED NON-PRESSURE PIPES AND FITTINGS WITH FLEXIBLE JOINTS
09/30209265 DC : 0 BS 5911-4:2002+A2 - CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 4: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE INSPECTION CHAMBERS (COMPLEMENTARY TO BS EN 1917:2002)
16/30329500 DC : 0 BS 5834-1 - SURFACE BOXES, GUARDS AND UNDERGROUND CHAMBERS FOR THE PURPOSES OFUTILITIES - PART 1: SPECIFICATION FOR GUARDS AND PLINTHS
14/30283603 DC : 0 BS 5385-3 - WALL AND FLOOR TILING - PART 3: DESIGN AND INSTALLATION OF INTERNAL ANDEXTERNAL CERAMIC AND MOSAIC FLOOR TILING IN NORMAL CONDITIONS - CODE OF PRACTICE
BS 5911-6(2004) : 2004 CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 6: SPECIFICATION FOR ROAD GULLIES AND GULLY COVER SLABS
09/30209261 DC : 0 BS 5911-1:2002+A2 - CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 1: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE PIPES (INCLUDING JACKING PIPES) AND FITTINGS WITH FLEXIBLE JOINTS (COMPLEMENTARY TO BS EN 1916:2002)
BS 1881-124:2015 Testing concrete Methods for analysis of hardened concrete
BS 5911-5(2004) : 2004 CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 5: SPECIFICATION FOR PRESTRESSED NON-PRESSURE PIPES AND FITTINGS WITH FLEXIBLE JOINTS
BS 8500-2(2015) : 2015 CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE
BS 5911-3(2010) : 2010 CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 3: SPECIFICATION FOR UNREINFORCED AND REINFORCED CONCRETE MANHOLES AND SOAKAWAYS (COMPLEMENTARY TO BS EN 1917:2002)
BS 5834-1:2017 Surface boxes, guards and underground chambers for the purposes of utilities Specification for guards and plinths
BS 8500-2(2006) : 2006 CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206-1 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE

93/68/EEC : 1993 AMD 2 1998 COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
EN 15167-2:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation
EN 196-7:2007 Methods of testing cement - Part 7: Methods of taking and preparing samples of cement
EN 196-2:2013 Method of testing cement - Part 2: Chemical analysis of cement
EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements
89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
EN 196-1:2016 Methods of testing cement - Part 1: Determination of strength
EN 206-1:2000/A2:2005 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
EN 196-3:2016 Methods of testing cement - Part 3: Determination of setting times and soundness

View more information
US$237.18
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.