BS EN 1759-1:2004
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
11-30-2004
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
5 General requirements
Annex A (informative) Recommendations for weld ends of
weld-neck flanges
Annex B (informative) Classification of bolting materials
Annex C (informative) Use of metric bolting in lieu of
imperial bolting
Annex D (informative) Determination of p/T ratings for
flanges using EN materials
Annex E (normative) Approximate masses of flanges and
collars
Bibliography
Describes requirements for circular steel flanges in Class designations Class 150 to Class 2500 and nominal sizes from NPS 1/2 to NPS 24.
Committee |
PSE/15
|
DevelopmentNote |
Supersedes BS 1560-3.1(1989). (12/2004)
|
DocumentType |
Standard
|
Pages |
78
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NS EN 1759-1 : 1ED 2004 | Identical |
UNI EN 1759-1 : 2005 | Identical |
DIN EN 1759-1:2005-02 | Identical |
SN EN 1759-1 : 2005 | Identical |
UNE-EN 1759-1:2005 | Identical |
NBN EN 1759-1 : 2005 | Identical |
EN 1759-1:2004 | Identical |
NEN EN 1759-1 : 2004 | Identical |
NF EN 1759-1 : 2005 | Identical |
I.S. EN 1759-1:2005 | Identical |
11/30244843 DC : 0 | BS 5306-4:2001+A1 - FIRE EXTINGUISHING INSTALLATIONS AND EQUIPMENT ON PREMISES - PART 4: SPECIFICATION FOR CARBON DIOXIDE SYSTEMS |
BS 5306-4(2001) : 2001 | FIRE EXTINGUISHING INSTALLATIONS AND EQUIPMENT ON PREMISES - PART 4: SPECIFICATION FOR CARBON DIOXIDE SYSTEMS |
BS PD5500(2006) : 2006 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
BS 5306-4:2001+A1:2012 | Fire extinguishing installations and equipment on premises Specification for carbon dioxide systems |
DEFSTAN 02-797(PT1)/3(2009) : 2009 | PIPEWORK ENGINEERING - PART 1: GENERAL |
EEMUA 234 : 2016 | 90/10 COPPER NICKEL ALLOY PIPING FOR OFFSHORE APPLICATIONS (SPECIFICATION) |
DEFSTAN 02-797(PT1)/2(2008) : 2008 | PIPEWORK ENGINEERING - PART 1: GENERAL |
DEFSTAN 02-332/2(2013) : 2013 | REQUIREMENTS FOR FEED, STEAM AND DRAIN SYSTEMS FOR NUCLEAR SUBMARINE PROPULSION AND GENERATING MACHINERY |
DEFSTAN 02-348/2(2008) : 2008 | GUIDE TO THE DESIGN, CORROSION ASSESSMENT AND STRESS ANALYSIS OF STEAM SYSTEMS PIPEWORK |
DEFSTAN 02-332/1(2005) : 2005 | REQUIREMENTS FOR FEED, STEAM AND DRAIN SYSTEMS FOR NUCLEAR SUBMARINE PROPULSION AND GENERATING MACHINERY |
EN ISO 4287:1998/A1:2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
EN 12560-6:2003 | Flanges and their joints - Gaskets for Class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges |
EN 1515-1:1999 | Flanges and their joints - Bolting - Part 1: Selection of bolting |
ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
EN 12560-1:2001 | Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts |
EN 12560-3:2001 | Flanges and their joints - Gaskets for Class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets |
EN 1708-1:2010 | Welding - Basic welded joint details in steel - Part 1: Pressurized components |
ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
EN ISO 9692-2:1998/AC:1999 | WELDING AND ALLIED PROCESSES - JOINT PREPARATION - PART 2: SUBMERGED ARC WELDING OF STEELS |
EN 12560-2:2013 | Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
ASTM A 537/A537M : 2013 | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel |
EN 10028-3:2017 | Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
ASTM A 204/A204M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum |
EN 12560-4:2001 | Flanges and their joints - Gaskets for Class-designated flantes - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges |
EN 10213-2 : 1995 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 2: STEEL GRADES FOR USE AT ROOM TEMPERATURE AND ELEVATED TEMPERATURES |
ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
ISO 4991:2015 | Steel castings for pressure purposes |
ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
ISO 887:2000 | Plain washers for metric bolts, screws and nuts for general purposes General plan |
ISO 9328-3:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 3: Weldable fine grain steels, normalized |
EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
ISO 9328-5:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 5: Weldable fine grain steels, thermomechanically rolled |
ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
EN ISO 887:2000/AC:2006 | PLAIN WASHERS FOR METRIC BOLTS, SCREWS AND NUTS FOR GENERAL PURPOSES - GENERAL PLAN (ISO 887:2000) |
EN 12560-7:2004 | Flanges and their joints - Gaskets for Class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges |
EN 10222-3:2017 | Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties |
EN 10222-5:2017 | Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
ISO 9328-2:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
ISO 4955:2016 | Heat-resistant steels |
EN 10222-4:2017 | Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength |
ASTM A 217/A217M : 2014 : REDLINE | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
EN 10222-2:2017 | Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN 10213-3 : 1995 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 3: STEEL GRADES FOR USE AT LOW TEMPERATURES |
ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
ISO 9692-2:1998 | Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels |
ISO 9327-1:1999 | Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 1: General requirements |
EN 12560-5:2001 | Flanges and their joints - Gaskets for Class-designated flanes - Part 5: Metallic ring joint gaskets for use with steel flanges |
ASTM A 515/A515M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
ASTM A 203/A203M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel |
ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
EN 10213-4 : 1995 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 4: AUSTENITIC AND AUSTENITIC-FERRITIC STEEL GRADES |
EN 10028-4:2017 | Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
ISO 9327-2:1999 | Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties |
EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.