• There are no items in your cart

BS EN 416-1:2009

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Single burner gas-fired overhead radiant tube heaters for non-domestic use Safety
Available format(s)

Hardcopy , PDF

Superseded date

11-06-2019

Language(s)

English

Published date

04-30-2009

Foreword
1 Scope
2 Normative references
3 Definitions
  3.1 Appliance and its constituent parts
  3.2 Combustion circuit
  3.3 Adjusting, control and safety devices
  3.4 Operation of the appliance
  3.5 Gases
  3.6 Conditions of operation and measurement
  3.7 Country of destination
4 Appliance classification
  4.1 Classification according to the nature of
      the gases used (categories)
  4.2 Classification according to the gases capable
      of being used
  4.3 Classification according to the mode of evacuation
      of the combustion products
5 Constructional requirements
  5.1 General
  5.2 Requirements for adjusting, control and safety
      devices
  5.3 Ignition devices
  5.4 Main burner
  5.5 Pressure test points
  5.6 Injectors
6 Operational requirements
  6.1 Soundness
  6.2 Heat inputs
  6.3 Limiting temperatures
  6.4 Ignition, cross-lighting and flame stability
  6.5 Pressure regulator
  6.6 Combustion
  6.7 Prolonged performance
  6.8 Measurement of oxides of Nitrogen (NO[X])
7 Test methods
  7.1 General
  7.2 Construction and design
  7.3 Safety of operation
  7.4 Other pollutants
8 Marking and instructions
  8.1 Marking of the appliance and the packaging
  8.2 Instructions
  8.3 Presentation
9 Evaluation of conformity of POCEDs and their associated
  terminals
  9.1 General
  9.2 Type testing
  9.3 Factory Production Control (FPC)
Annex A (informative) - National situations
      A.1 General
      A.2 Categories listed in the body of the standard
          and marketed in different countries
      A.3 Appliance supply pressures corresponding to
          the categories given in A.2
      A.4 Special categories marketed nationally or
          locally
      A.5 Test gases corresponding to the special
          categories given in A.4
      A.6 Gas connections in the various countries
      A.7 Flue connections in the various countries
Annex B (normative) - Appliance (flue) types
      B.1 Type B appliances with a fan in the combustion
          circuit
      B.2 Type C appliances with a fan in the combustion
          circuit
Annex C (informative) - Equivalence rules
      C.1 Conversion to categories within a restricted
          Wobbe Index range
      C.2 Conversion to categories within an identical
          Wobbe Index range
      C.3 Conversion to categories within a wider
          Wobbe Index range
Annex D (informative) - Calculation of flue gas
        mass flow rate
      D.1 Flue gas mass flow rate
      D.2 Quantity of air in the flue gas
      D.3 Flue gas excess air ratio (lambda)
      D.4 Quantity of water vapour in the flue gas
      D.5 Quantity of Nitrogen in the flue gas
      D.6 Quantity of Oxygen in the flue gas
      D.7 Dry quantity of flue gas
      D.8 Quantity of carbon dioxide in the flue gas
Annex E (informative) - Identification of gas types in
Annex F (normative) - Special national conditions
      F.1 General
Annex G (informative) - Calculation example of the
        weighting factors for an appliance with several
        rates
      G.1 Appliance rates
      G.2 Weighting of Q[pi],% = 20
      G.3 Weighting of Q[pi],% = 40
      G.4 Weighting of Q[pi],% = 60
      G.5 Weighting of Q[pi],% = 70
      G.6 Total weighting
Annex H (informative) - NO[X] conversion calculation
      H.1 NO[X] emission conversion factors
      H.2 NO[X] conversion calculation
Annex I (informative) - National situations for countries
        whose national bodies are CEN Associate
        Members
Annex J (informative) - An example of sampling plans
      J.1 Sampling plans
      J.2 Inspection levels and procedures
Annex K (informative) - Flue Loss determination
      K.1 General conditions of test
      K.2 Test conditions
      K.3 Test procedure
      K.4 Accuracy of measurement
      K.5 Calculation of Flue Loss
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 90/396/EEC - The approximation of the
         laws of Member States concerning gas appliances
Annex ZB (informative) - Clauses of this European Standard
         addressing the provisions of the EU Construction
         Products Directive
      ZB.1 Scope and relevant characteristics
      ZB.2 Procedure(s) for attestation of conformity
           of [construction products]
      ZB.3 CE marking and labelling
Bibliography

Describes the requirements and test methods for the construction, safety, classification and marking of non-domestic gas fired overhead radiant tube heaters incorporating a single burner system under the control of an automatic burner control system, referred to in the body of the text as 'appliances'.

This European Standard specifies the requirements and test methods for the construction, safety, classification and marking of non-domestic gas fired overhead radiant tube heaters incorporating a single burner system under the control of an automatic burner control system, referred to in the body of the text as \'appliances\'. This standard is applicable to Type A2, A3, B12, B13, B22, B23, B42, B43, B52, B53, C12, C13, C32 and C33 appliances intended for use in other than domestic dwellings, in which the supply of combustion air and/or the evacuation of the products of combustion is achieved by mechanical means located upstream of the draught diverter, if provided. This standard is not applicable to: a) appliances designed for use in domestic dwelling; b) outdoor appliances; c) appliances of heat input in excess of 120 kW (based on the net calorific value of the appropriate reference test gas); d) appliances having fully pre-mixed gas and air burners in which: 1) either the gas and all the combustion air are brought together just before the level of the combustion zone; or 2) the pre-mixing of the gas and all combustion air is carried out in a part of the burner upstream of the combustion zone; e) appliances that are designed for continuous condensation within the flue system under normal operating conditions; f) appliances having combustion products evacuation ducts that are non-metallic. This standard is applicable to appliances which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production control, but these requirements only apply to POCEDs and their associated terminals. NOTE Requirements for appliances which are not intended to be type tested would need to be subject to further consideration. Requirements concerning the rational use of energy have not been included in this European Standard.

Committee
GSE/20
DevelopmentNote
Supersedes BS 7186(1989). (10/1999) Supersedes 90/82154 DC and 96/708510 DC. (02/2002) Supersedes 06/30139765 DC. (04/2009)
DocumentType
Standard
Pages
132
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
UNI EN 416-1 : 2009 Identical
I.S. EN 416-1:2009 Identical
EN 416-1:2009 Identical
UNE-EN 416-1:2009 Identical
NEN EN 416-1 : 2009 Identical
DIN EN 416-1:2009-09 Identical
NF EN 416-1 : 2009 Identical
NBN EN 416-1 : 2009 Identical
SN EN 416-1 : 2009 Identical
NS EN 416-1 : 2009 Identical

12/30258581 DC : 0 BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS
BS 6896:2011 Specification for installation and maintenance of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)
BS 6896:2005 Specification for installation of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)
BS 5908-2:2012 Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations
02/714117 DC : DRAFT DEC 2002 BS 6896:1991 - INSTALLATION OF GAS-FIRED OVERHEAD RADIANT HEATERS FOR INDUSTRIAL AND COMMERCIAL HEATING (2ND AND 3RD FAMILY GASES)
10/30218901 DC : 0 BS 6896 - SPECIFICATION FOR INSTALLATION OF GAS-FIRED OVERHEAD RADIANT HEATERS FOR INDUSTRIAL AND COMMERCIAL HEATING (2ND AND 3RD FAMILY GASES)

93/68/EEC : 1993 AMD 2 1998 COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
ISO 7005-2:1988 Metallic flanges — Part 2: Cast iron flanges
ISO 6976:2016 Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition
ISO 274:1975 Copper tubes of circular section — Dimensions
EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
EN 60584-2:1993 Thermocouples - Part 2: Tolerances
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
ISO 7005-3:1988 Metallic flanges Part 3: Copper alloy and composite flanges
EN 13410:2001/AC:2002 GAS-FIRED OVERHEAD RADIANT HEATERS - VENTILATION REQUIREMENTS FOR NON-DOMESTIC PREMISES
EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
EN 161:2011+A3:2013 Automatic shut-off valves for gas burners and gas appliances
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
EN 125:2010+A1:2015 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices
EN 126:2012 Multifunctional controls for gas burning appliances
EN 60584-1:2013 Thermocouples - Part 1: EMF specifications and tolerances
CEN/TR 1749:2014 European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
CR 1404:1994 Determination of emissions from appliances burning gaseous fuels during type-testing
EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
EN 60730-2-1 : 97 AMD 11 2005 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-1: PARTICULAR REQUIREMENTS FOR ELECTRICAL CONTROLS FOR ELECTRICAL HOUSEHOLD APPLIANCES
ISO 3166-1:2013 Codes for the representation of names of countries and their subdivisions Part 1: Country codes
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN ISO 6976:2016 Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016)
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
1990/396/EEC : 1990 COUNCIL DIRECTIVE OF 29 JUNE 1990 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO APPLIANCES BURNING GASEOUS FUELS
EN 257:2010 Mechanical thermostats for gas-burning appliances

View more information
US$402.48
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.