• There are no items in your cart

BS EN 45510-2-9:2008

Current
Current

The latest, up-to-date edition.

Guide for procurement of power station equipment Electrical equipment. Cabling systems
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

09-30-2008

1 Scope
2 Normative references
3 Definitions
   3.1 Organisational terms
   3.2 Technical terms
   3.3 General terms
4 Brief overall project description
   4.1 Role and organisation of purchaser
   4.2 Site location
   4.3 Equipment task
   4.4 Equipment to be purchased
   4.5 Control and instrumentation
   4.6 Electrical supplies and other services
   4.7 Other interfaces
   4.8 Project programme
   4.9 Equipment identification systems
5 Extent of supply
6 Terminal points
7 Operational requirements
   7.1 Operating environment
   7.2 Manning levels
   7.3 Normal operation
   7.4 Operating hours
   7.5 Start-up and shut-down
   7.6 Abnormal conditions
   7.7 Further operational requirements
8 Life expectancy
   8.1 Design life
   8.2 Components requiring periodic maintenance
9 Performance requirements
   9.1 Duty
   9.2 Performance
   9.3 Equipment margins
   9.4 Availability
   9.5 Levels of component redundancy
   9.6 Further performance requirements
10 Design and fabrication
   10.1 Specific equipment features
   10.2 Design justification
   10.3 Material selection
   10.4 Safety
   10.5 Interchangeability
   10.6 Fabrication methods
11 Maintenance requirements
   11.1 Planned maintenance
   11.2 Personnel safety
   11.3 Requirements for access
   11.4 Lifting requirements
   11.5 Special tools
   11.6 Test equipment
   11.7 Spare parts strategy
   11.8 Special precautions
12 Tender documentation
   12.1 Tender documentation
   12.2 Contract documentation
13 Applicable legislation, regulations, standards and
   further requirements
   13.1 Legislation and regulations
   13.2 Standards
   13.3 Further requirements
14 Evaluation criteria
   14.1 General
   14.2 Technical criteria
15 Quality measures
   15.1 General
   15.2 Approvals procedure
   15.3 Inspection requirements
   15.4 Non-conformity
16 Site factors
   16.1 Access
   16.2 Facilities
   16.3 Site specific requirements
17 Verification of specified performance
   17.1 General
   17.2 Works tests
   17.3 Tests during installation and commissioning
   17.4 Technical criteria for trial run
   17.5 Functional and performance tests
Annex A (informative) - Design data (Check list)
Annex B (informative) - Supply data (Check list)
Annex C (informative) - Installation data (Check list)
Bibliography

Provides guidance on writing the technical specification for the procurement of equipment for use in electricity generating stations (power stations).

This standard gives guidance on writing the technical specification for the procurement of equipment for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.

This Guide on cabling systems deals with a wide range of activities and may be used for any or all of these activities by selection of the relevant parts e.g.:

  • provision of support for cable;

  • laying of cable;

  • completion of cable ends;

The Guide covers the installation of power cable up to and including 20,8/36 (42) kV and the supply and installation of control and instrumentation cable. The supply of power cable is covered by EN 45510-2-8.

The Guide includes the installation of protective conductor cable for earthing and equipotential bonding up to the main earthing busbar(s), but not the below ground earth-electrode network.

The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied.

This Guide indicates to potential purchasers how their specification should be prepared so that

  • the equipment type and capacity interfaces correctly with other elements of the systems,

  • predicted performance is achieved,

  • ancillary equipment is properly sized,

  • reliability, availability and safety requirements are achieved,

  • proper consideration is given to the evaluation process and the quality measures to be applied.

This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser\'s project strategy. It does not cover

  • any commercial, contractual or legal issues which are normally in separate parts of an enquiry,

  • any allocation of responsibilities which are determined by the contract.

This Guide does not prescribe the arrangement of the documents in the enquiry.

NOTE As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Committee
PEL/99
DevelopmentNote
Supersedes 94/712993 DC. (10/2008)
DocumentType
Standard
Pages
54
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
EN 45510-2-9:2008 Identical
EN 45510-2-9 : 2008 Identical

IEC 61537:2006 Cable management - Cable tray systems and cable ladder systems
IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
HD 629.2 S2:2006/A1:2008 TEST REQUIREMENTS ON ACCESSORIES FOR USE ON POWER CABLES OF RATED VOLTAGE FROM 3,6/6(7,2) KV UP TO 20,8/36(42) KV - PART 2: CABLES WITH IMPREGNATED PAPER INSULATION
HD 622 S1:1996/A2:2005 Power cables having rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stations
HD 627 S1:1996/A2:2005 MULTICORE AND MULTIPAIR CABLES FOR INSTALLATION ABOVE AND BELOW GROUND
IEC 60228:2004 Conductors of insulated cables
IEC 60702-1:2002+AMD1:2015 CSV Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables
EN 61238-1:2003 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Part 1: Test methods and requirements
HD 21-3 : S3 AMD 2 2008 POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - NON-SHEATHED CABLES FOR FIXED WIRING
IEC 61442:2005 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
EN 60702-1:2002/A1:2015 MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 1: CABLES (IEC 60702-1:2002/A1:2015)
IEC 60050-195:1998 International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock
EN 50086-2-4:1994/A1:2001 SPECIFICATION FOR CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR CONDUIT SYSTEMS BURIED UNDERGROUND
IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
EN 60584-3:2008 Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system
IEC 60364-5-51:2005 Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules
IEC 61210:2010 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
HD 60364-4-41:2017/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
HD 60364-5-54:2011/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
IEC 60584-3:2007 Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system
HD 637 S1:1999/corrigendum:2005 POWER INSTALLATIONS EXCEEDING 1 KV A.C.
IEC 60754-1:2011 Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
EN 60228:2005 COR 2005 CONDUCTORS OF INSULATED CABLES
EN ISO 9002:1994/AC:1997 QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION
HD 22.3 S4:2004/A1:2006 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSSLINKED INSULATION - PART 3: HEAT RESISTANT SILICONE RUBBER INSULATED CABLES
IEC 60050-442:1998 International Electrotechnical Vocabulary (IEV) - Part 442: Electrical accessories
HD 22.15 : 200S2 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 15: MULTICORE CABLES INSULATED AND SHEATHED WITH HEAT RESISTANT SILICONE RUBBER
EN 50386:2010/A1:2013 BUSHINGS UP TO 1 KV AND FROM 250 A TO 5 KA, FOR LIQUID FILLED TRANSFORMERS
IEC 61196-3:1998 Radio frequency cables - Part 3: Sectional specification for coaxial cables for use in local area networks
HD 60364-5-51:2009/A12:2017 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
ISO 9002:1994 Quality systems — Model for quality assurance in production, installation and servicing
EN 45510-2-8:2004 Guide for procurement of power station equipment - Part 2-8: Electrical equipment - Power cables
EN 60708:2005/AC:2016-08 LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60754-2:2011 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
EN 50262 : 1998 AMD 2 2004 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
IEC 61238-1:2003 Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) - Part 1: Test methods and requirements
EN 61442:2005 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
ISO 9001:2015 Quality management systems — Requirements
IEC 60050-461:2008 International Electrotechnical Vocabulary (IEV) - Part 461: Electric cables
EN 60079-14:2014/AC:2016 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
EN 61210:2010 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
IEC 60708:2005 Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
HD 586.3 : 200S1 MINERAL INSULATED CABLES WITH A RATED VOLTAGE NOT EXCEEDING 750 V PART 3: GUIDE TO USE
HD 22-9 : 200S3 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 9: SINGLE CORE HALOGEN-FREE NON-SHEATHED CABLES FOR FIXED WIRING HAVING LOW EMISSION OF SMOKE
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 50146:2000 Cable ties for electrical installations
EN 61537:2007 Cable management - Cable tray systems and cable ladder systems
IEC 61545:1996 Connecting devices - Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units
EN 61196-3:1998 Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks
EN 45510-2-8 : 2004 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-8: ELECTRICAL EQUIPMENT - POWER CABLES
EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
IEC 60702-2:2002+AMD1:2015 CSV Mineral insulated cables and their terminations with a rated voltagenot exceeding 750 V - Part 2: Terminations
HD 604 S1:1994/A3:2005 0.6/1 KV POWER CABLES WITH SPECIAL FIRE PERFORMANCE FOR USE IN POWER STATIONS
IEC 60981:2004 Extra heavy-duty electrical rigid steel conduits
EN 60702-2:2002/A1:2015 MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 2: TERMINATIONS (IEC 60702-2:2002/A1:2015)
HD 629.1 S2:2006/A1:2008 TEST REQUIREMENTS ON ACCESSORIES FOR USE ON POWER CABLES OF RATED VOLTAGE FROM 3,6/6(7,2) KV UP TO 20,8/36(42) KV - PART 1: CABLES WITH EXTRUDED INSULATION

View more information
US$311.44
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.