BS EN 4626-001:2008
Current
Current
The latest, up-to-date edition.
Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 °C to 125 °C (cable dependent). Flush contacts Technical specification
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
09-30-2008
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Description
5 Design
6 Drawings
7 Tests
8 Quality assurance
9 Designation and marking
Describes the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for fibre sub-assembly contact in rack and panel connectors, intended for use in a temperature range from -65 degree C to 125 degree C continuous (cable dependent).
This standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for fibre sub-assembly contact in rack and panel connectors, intended for use in a temperature range from ? 65 °C to 125 °C continuous (cable dependent). This standard specifies a pair of adaptors to fit with standard Quadrax cavities and EN 4531-101 optical contact.
| Committee |
ACE/6
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Standards | Relationship |
| EN 4626-001:2008 | Identical |
| EN 2591-311 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 311: LOW AIR PRESSURE |
| EN 2591-319 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 319: GASTIGHTNESS OF SOLDERLESS WRAPPED CONNECTIONS |
| EN 2591-6401 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6401: OPTICAL ELEMENTS - ACCELERATION STEADY STATE |
| EN 2591-6324 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6324: OPTICAL ELEMENTS - INTERFACIAL SEALING |
| EN 2591-6405:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6405: Optical elements - Axial load |
| EN 2591-602:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 602: Optical elements - Variation of attenuation and optical discontinuity |
| EN 2591-308 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 308: SAND AND DUST |
| EN 2591-603:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 603: Optical elements - Change of power distribution |
| EN 2591-412 : 1999 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 412: CONTACT INSERTION AND EXTRACTION FORCES |
| EN 2591-612:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 612: Optical elements - Effectiveness of cable attachment - Cable axial compression |
| EN 2591-610:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 610: Optical elements - Effectiveness of cable attachment - Cable pulling |
| EN 2591-408 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 408: MATING AND UNMATING FORCES |
| EN 2591-611:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 611: Optical elements - Effectiveness of cable attachment - Cable torsion |
| EN 2591-6317 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6317: OPTICAL ELEMENTS - FLAMMABILITY |
| EN 2591-6307 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6307: OPTICAL ELEMENTS - SALT MIST |
| EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
| EN 2591-605:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 605: Optical elements - Return loss |
| EN 2591-312 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 312: AIR LEAKAGE |
| EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
| EN 2591-607:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 607: Optical elements - Immunity to ambient light coupling |
| EN 2591-6402:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6402: Optical elements - Shock |
| EN 2591-6403:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6403: Optical elements - Vibrations |
| EN 2591-614:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 614: Optical elements - Connector radial compression |
| EN 2591-6316 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6316: OPTICAL ELEMENTS - OZONE RESISTANCE |
| EN 2591-410 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 410: INSERT RETENTION IN HOUSING (AXIAL) |
| EN 2591-6321:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6321: Optical elements - Damp heat, cyclic test |
| EN 2591-320 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 320: SIMULATED SOLAR RADIATION AT GROUND LEVEL |
| EN 2591-6318 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6318: OPTICAL ELEMENTS - FIRE RESISTANCE |
| PREN 4531-101 : 200P3 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY TRIPLE START THREADED RING - FLUSH CONTACTS - PART 101: OPTICAL CONTACT FOR EN 4641 MULTIMODE CABLE -55 DEGREES C TO 125 DEGREES C - PRODUCT STANDARD |
| EN 2591-6101 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6101: OPTICAL ELEMENTS - VISUAL EXAMINATION |
| EN 2591-427 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 427: ROBUSTNESS OF PROTECTIVE COVER ATTACHMENT |
| PREN 3197 : 200P2 | AEROSPACE SERIES - DESIGN AND INSTALLATION OF AIRCRAFT ELECTRICAL AND OPTICAL INTERCONNECTION SYSTEMS |
| EN 2591-6404:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6404: Optical elements - Transverse load |
| EN 2591-6314 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6314: OPTICAL ELEMENTS - IMMERSION AT LOW AIR PRESSURE |
| EN 2591-409 : 1999 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 409: CONTACT RETENTION IN INSERT |
| EN 2591-313 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 313: ARTIFICIAL RAIN |
| EN 2591-609:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing |
| EN 2591-407 : 1999 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 407: DURABILITY OF CONTACT RETENTION SYSTEM AND SEALS |
| EN 2591-6301 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6301: OPTICAL ELEMENTS - ENDURANCE AT TEMPERATURE |
| EN 2591-100:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General |
| EN 2591-6323:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6323: Optical elements - Thermal shock (Hermetically sealed devices) |
| EN 2591-6415:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6415: Optical elements - Test probe damage |
| EN 4626-002:2008 | Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 002: Specification of performance and contact arrangements |
| EN 2591-604:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 604: Optical elements - Cleaning capability of optical face |
| EN 2591-6303 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6303: OPTICAL ELEMENTS - COLD/LOW PRESSURE AND DAMP HEAT |
| EN 2591-613:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 613: Optical elements - Impact test |
| EN 2591-617:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 617: Optical elements - Temperature cycling |
| EN 2591-309 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 309: DRY HEAT |
| EN 2591-304 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 304: DAMP HEAT STEADY STATE |
| EN 2591-601:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 601: Optical elements - Insertion loss |
| EN 2591-411 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 411: INSERT RETENTION IN HOUSING (TORSIONAL) |
| EN 2591-615:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 615: Optical elements - Connection integrity at temperature |
| EN 2591-302 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - CLIMATIC SEQUENCE |
| EN 2591-6414:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6414: Optical elements - Unmating of lanyard release optical connection elements |
| EN 2591-6306 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6306: OPTICAL ELEMENTS - MOULD GROWTH |
| EN 2591-6315 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6315: OPTICAL ELEMENTS - FLUID RESISTANCE |
| EN 2591-6406:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6406: Optical elements - Mechanical endurance |
| EN 2591-310 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 310: COLD |
| EN 2591-6305 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6305: OPTICAL ELEMENTS - RAPID CHANGE OF TEMPERATURE |
| EN 2591-325:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 325: Ice resistance |
US$170.10
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.