• There are no items in your cart

BS EN 60335-2-72:2012

Current
Current

The latest, up-to-date edition.

Household and similar electrical appliances. Safety Particular requirements for floor treatment machines with or without traction drive, for commercial use
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

07-31-2013

This clause of Part 1 is replaced by the following.

This International Standard deals with the safety of powered ride-on and powered walk-behind machines intended for commercial indoor or outdoor use for the following applications:

  • sweeping,

  • scrubbing,

  • wet or dry pick-up,

  • polishing,

  • application of wax, sealing products and powder based detergents,

  • shampooing

of floors with an artificial surface.

Their cleaning motion is more linear than lateral or periodic.

NOTE 101 By contrast, the cleaning motion of machines covered by IEC 60335-2-67 is more lateral or periodic than linear.

NOTE 102 This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope:

  • public use areas such as hotels, schools, hospitals;

  • industrial locations, for example factories and manufacturing shops;

  • retail outlets, for example shops and supermarkets;

  • business premises, for example offices and banks;

  • all uses other than normal housekeeping purposes.

They may be equipped with a traction drive system. The following power systems are covered:

  • internal combustion engines,

  • mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances,

  • battery powered motors.

Battery powered machines may be equipped with a built-in battery charger.

This standard deals with the reasonably foreseeable hazards presented by machines that are encountered by all persons.

However, in general, it does not take into account:

  • children playing with the machine;

  • the use of the machine by children;

  • the use of the machine by vulnerable people or very vulnerable people.

This standard does not apply to

  • floor treatment appliances for household use according to IEC 60335-2-10;

  • floor treatment machines for commercial use according to IEC 60335-2-67;

  • spray extraction machines for commercial use (IEC 60335-2-68);

  • wet and dry vacuum cleaners, including power brush, for commercial use (IEC 60335-2-69);

  • road sweepers;

NOTE 103 In Europe, EN 13019 covers road sweepers.

  • machines designed for use on slopes with a gradient exceeding 20 %;

  • machines equipped with a power take-off (PTO);

  • machines designed for use in corrosive or explosive environments (dust, vapour or gas);

  • machines designed for picking up hazardous dusts (as defined in IEC 60335-2-69), inflammable substances, or glowing particles;

  • machines designed for use in vehicles or on board of ships or aircraft.

NOTE 104 Attention is drawn to the fact that

  • in many countries additional requirements on the safe use of the equipment covered can be specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities;

  • ride-on machines designed for transport over public roads can be subject to additional requirements (e.g. lighting, license plate etc.).

Committee
CPL/61/10
DevelopmentNote
Supersedes 91/29808 DC. (05/2005) Supersedes 08/30193440 DC. (01/2010) Supersedes 10/30216260 DC. (07/2013)
DocumentType
Standard
Pages
68
PublisherName
British Standards Institution
Status
Current
Supersedes

EN 60312-1:2017 Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
ISO 7574-4:1985 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 4: Methods for stated values for batches of machines
ISO 3411:2007 Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
EN ISO 3411:2007 Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)
ISO 5353:1995 Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point
IEC 60335-2-67:2012+AMD1:2016 CSV Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercialuse
ISO 9614-2:1996 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning
ISO 7574-1:1985 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 1: General considerations and definitions
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
IEC 60335-2-10:2002+AMD1:2008 CSV Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines
IEC 60335-2-69:2016 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
EN ISO 5353:1998 Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995)
EN 62061:2005/A2:2015 SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015)
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
ISO 5349-1:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
IEC 60312-1:2010+AMD1:2011 CSV Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
EN 13019:2001+A1:2008 Machines for road surface cleaning - Safety requirements
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
IEC 60335-2-68:2012+AMD1:2016 CSV Household and similar electrical appliances - Safety - Part 2-68:Particular requirements for spray extraction machines, for commercial use
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 6344-2:1998 Coated abrasives Grain size analysis Part 2: Determination of grain size distribution of macrogrits P12 to P220
ISO 3743-1:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room

View more information
US$311.44
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.