• There are no items in your cart

BS EN 61019-1:2005

Current
Current

The latest, up-to-date edition.

Surface acoustic wave (SAW) resonators Generic specification
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

03-10-2005

1 Scope
2 Normative references
3 Order of precedence
4 Terms and definitions
  4.1 General terms
  4.2 Operational properties
5 Preferred values for ratings and characteristics
  5.1 Standard nominal frequency values in megahertz (MHz)
  5.2 Standard operating temperature ranges in degrees
       Celsius (degree C)
  5.3 Standard values of load capacitance in picofarads (pF)
  5.4 Standard levels of drive in milliwatts (mW)
  5.5 Standard values of minimum insertion attenuation'
       in decibels (dB)
  5.6 Standard climatic category
  5.7 Bump severity
  5.8 Vibration severity
  5.9 Shock severity
  5.10 Fine leak rate
6 Marking
  6.1 Resonator marking
  6.2 Package marking
7 Quality assessment procedures
  7.1 Primary stage of manufacture
  7.2 Structurally similar components
  7.3 Subcontracting
  7.4 Incorporated components
  7.5 Manufacturer's approval
  7.6 Approval procedures
  7.7 Procedures for capability approval
  7.8 Procedures for qualification approval
  7.9 Test procedures
  7.10 Screening requirements
  7.11 Rework and repair work
  7.12 Certified records of released lots
  7.13 Validity of release
  7.14 Release for delivery
  7.15 Unchecked parameters
8 Test and measurement procedures
  8.1 General
  8.2 Test and measurement conditions
  8.3 Visual inspection
  8.4 Dimensions and gauging procedures
  8.5 Measurement method of one-port resonator
  8.6 Measurement method of two-port resonator
  8.7 Mechanical and environmental test procedures
  8.8 Endurance test procedure
Annex ZA (normative) Normative references to international
                     publications with their corresponding
                     European publications
Figures

Defines the methods of test and general requirements for SAW resonators using either capability approval or qualification approval procedures of the IECQ system.

IEC 61019-1:2004 specifies the methods of test and general requirements for SAW resonators using either capability approval or qualification approval procedures of the IECQ system. This first edition of IEC 61019-1 cancels and replaces the first edition of IEC 61019-1-1 published in 1990 and the first edition of IEC 61019-1-2 published in 1993. It constitutes a technical revision.

Committee
W/-
DevelopmentNote
Supersedes 02/206181 DC. (03/2005)
DocumentType
Standard
Pages
42
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
IEC 61019-1:2004 Identical
DIN EN 61019-1:2005-06 Identical
NBN EN 61019-1 : 2005 Identical
NF EN 61019-1 : 2005 Identical
EN 61019-1 : 2005 Identical
I.S. EN 61019-1:2005 Identical

HD 323.2.20 : 200S3 BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST T - SOLDERING
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
IEC 60068-2-58:2015+AMD1:2017 CSV Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-20:2008 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
IECQ 001002-3:2005 IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 3: APPROVAL PROCEDURES
EN 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-21:2006 Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
IEC 60068-2-13:1983 Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure
EN 60068-1:2014 Environmental testing - Part 1: General and guidance
EN 60068-2-64:2008 ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
IECQ 001002-2:1998 IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 2: DOCUMENTATION
EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
EN 60068-2-7:1993 Environmental testing - Part 2: Tests - Test Ga: Acceleration, steady state
IEC 60068-2-64:2008 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
EN 61019-2:2005 Surface acoustic wave (SAW) resonators - Part 2: Guide to the use
Q C 001005 : 1995 REGISTER OF FIRMS, PRODUCTS AND SERVICES APPROVED UNDER THE IECQ SYSTEM, INCLUDING ISO 900
IEC 61019-2:2005 Surface acoustic wave (SAW) resonators - Part 2: Guide to the use
EN 60068-2-17:1994 Environmental testing - Part 2: Tests - Test Q: Sealing
IEC 60068-2-17:1994 Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
EN 60068-2-13:1999 Environmental testing - Part 2: Tests - Test M: Low air pressure
EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60050-561:2014 International Electrotechnical Vocabulary (IEV) - Part 561: Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection
IEC 60122-1:2002 Quartz crystal units of assessed quality - Part 1: Generic specification
IEC 60068-2-29:1987 Environmental testing. Part 2: Tests. Test Eb and guidance: Bump
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 61019-3:1991 Surface acoustic wave (SAW) resonators - Part 3: Standard outlines and lead connections
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
EN 60068-2-45:1992/A1:1993 Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents
EN 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-52:2017 Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

View more information
US$261.13
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.