• There are no items in your cart

BS EN 61184:2017

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Bayonet lampholders
Available format(s)

Hardcopy , PDF

Withdrawn date

10-03-2022

Language(s)

English

Published date

11-21-2017

This document applies to bayonet lampholders B15d and B22d for connection of lamps and semi-luminaires to a supply voltage of 250V. This document also covers lampholders which are integral with a luminaire or intended to be built into appliances. It covers the requirements for the lampholder only. For all other requirements, such as protection against electric shock in the area of the terminals, the requirements of the relevant appliance standard are observed and tested after building into the appropriate equipment, when that equipment is tested according to its own standard. Lampholders for use by luminaire manufacturers only are not for retail sale. Where lampholders are used in luminaires, their maximum operating temperatures are specified in IEC60598‑1 . B15d denotes the cap/holder fit as defined by IEC60061‑1 , sheet 7004-11 and IEC60061‑2 , sheet 7005-16 with the corresponding gauges. B22d denotes the cap/holder fit as defined by IEC60061‑1 , sheet 7004-10 and IEC60061‑2 , sheet 7005-10 with the corresponding gauges.

Committee
CPL/34/1
DevelopmentNote
Supersedes 95/211062 DC and 99/245234 DC. (11/2001) Supersedes 03/301475 DC. (11/2005) Supersedes 07/30169008 DC. (04/2009) Supersedes 10/30215790 DC. (10/2011) Supersedes 16/30337907 DC. (11/2017)
DocumentType
Standard
Pages
76
PublisherName
British Standards Institution
Status
Withdrawn
Supersedes

Standards Relationship
NBN EN 61184 : 2010 AMD 1 2011 Identical
IEC 61184:2017 Identical
UNE-EN 61184:2011 Identical
EN 61184:2017 Identical
NF EN 61184 : 2008 AMD 1 2011 Identical
I.S. EN 61184:2017 Identical

IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60238:2016+AMD1:2017 CSV Edison screw lampholders
IEC 60061-3:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60664-4:2005 Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress
IEC 60838-1:2016+AMD1:2017 CSV Miscellaneous lampholders - Part 1: General requirements and tests
IEC 61347-1:2015 RLV Lamp controlgear - Part 1: General and safety requirements
IEC 60061-2:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
EN 60399:2004/A1:2008 BARREL THREAD FOR LAMPHOLDERS WITH SHADE HOLDER RING
EN 60112 : 2003 AMD 1 2009 METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
IEC 60399:2004+AMD1:2008 CSV Barrel thread for lampholders with shade holder ring
IEC 60064:1993+AMD1:2000+AMD2:2002+AMD3:2005 CSV Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 61058-1:2016 Switches for appliances - Part 1: General requirements
IEC 60061-4:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
IEC 60598-1:2014+AMD1:2017 CSV Luminaires - Part 1: General requirements and tests
EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 60061-1:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
ISO 4046-4:2002 Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 60695-11-5:2017 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
IEC 60695-11-5 : 2.0 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
IEC 60695-11-5:2016 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)

View more information
US$335.40
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.