• There are no items in your cart

BS EN 61249-2-23:2005

Current
Current

The latest, up-to-date edition.

Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

08-25-2005

1 Scope
2 Normative references
3 Materials and construction
   3.1 Resin system
   3.2 Reinforcement
   3.3 Metal foil
4 Internal marking
5 Electrical properties
6 Non-electrical properties of the copper-clad laminate sheet
   6.1 Appearance of the copper-clad sheet
   6.2 Appearance of the unclad face
   6.3 Laminate thickness, including copper foil
   6.4 Bow and twist
   6.5 Properties related to the copper foil bond
   6.6 Punching and machining
   6.7 Dimensional stability
   6.8 Sheet sizes
   6.9 Rectangularity of cut panels
7 Non-electrical properties of the base material after
   complete removal of the copper foil
   7.1 Appearance of the dielectric base material
   7.2 Flexural strength
   7.3 Flammability
   7.4 Water absorption
   7.5 Measling
   7.6 Glass transition temperature and cure factor
8 Quality assurance
   8.1 Quality system
   8.2 Responsibility for inspection
   8.3 Qualification inspection
   8.4 Quality conformance inspection
   8.5 Certificate of conformance
   8.6 Safety data sheet
9 Packaging and marking
10 Ordering information
Annex A (informative) Engineering information
      A.1 Chemical properties
      A.2 Electrical properties
      A.3 Flammability properties
      A.4 Mechanical properties
      A.5 Physical properties
      A.6 Thermal properties
Annex ZA (normative) Normative references to international
                     publications with their corresponding
                     European publications
Tables

Gives requirements for properties of non-halogenated phenolic cellulose paper copper-clad laminated sheets, economic grade, in thicknesses of 0,8 mm up to 3,2 mm.

This part of IEC 61249 gives requirements for properties of non-halogenated phenolic cellulose paper copper-clad laminated sheets, economic grade, in thicknesses of 0,8 mm up to 3,2 mm. This standard covers materials with different requirements on flammability and are designated according to the following: Material 61249-2-23-1: general purpose grade, requirement on flammability not specified; Material 61249-2-23-2: materials of defined flammability (vertical burning test). These grades of material provide for one of two flammability requirements and designated as FV0 or FV1 in Table 8.

Committee
EPL/501
DevelopmentNote
Supersedes 02/210157 DC. (09/2005)
DocumentType
Standard
Pages
20
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
I.S. EN 61249-2-23:2005 Identical
EN 61249-2-23:2005 Identical
NF EN 61249-2-23 : 2005 Identical
DIN EN 61249-2-23:2005-08 Identical
NBN EN 61249-2-23 : 2006 Identical
IEC 61249-2-23:2005 Identical

EN 61249-5-1:1996 Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials)
ISO 11014-1:1994 Safety data sheet for chemical products Part 1: Content and order of sections
IEC 61249-5-1:1995 Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials)
ISO 14001:2015 Environmental management systems — Requirements with guidance for use
IEC 60194:2015 Printed board design, manufacture and assembly - Terms and definitions
EN ISO 14001:2015 Environmental management systems - Requirements with guidance for use (ISO 14001:2015)
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
IEC 61189-2:2006 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
EN 61189-2:2006 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures

View more information
US$170.10
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.