• There are no items in your cart

BS EN 61287-1:2014

Current
Current

The latest, up-to-date edition.

Railway applications. Power converters installed on board rolling stock Characteristics and test methods
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

12-31-2014

1 Scope
2 Normative references
3 Terms and definitions
4 Common clauses
5 Direct traction converters
6 Indirect traction converters
7 Auxiliary converters
8 Semiconductor drive units (SDU)
Annex A (normative) - Arrangement of basic
        circuit diagrams
Annex B (informative) - Recapitulation of agreements
        between the manufacturer and the user
Annex C (informative) - Guidelines for magnetic field and
        induced voltage requirements
Bibliography
Annex ZA (normative) - Normative references to
         international publications with their
         corresponding European publications

Pertains to power electronic convertors mounted on board railway rolling-stock and intended for supplying - traction circuits; - auxiliary circuits of power vehicles, coaches and trailers.

This part of IEC61287 defines terminology, service conditions, general characteristics and test methods of electronic power converters onboard of rolling stock. This International Standard is applicable to power electronic converters mounted on board railway rolling-stock and intended for supplying traction circuits; auxiliary circuits of power vehicles, coaches and trailers. The application of this standard extends as far as possible to all other traction vehicles, including trolley-buses, for example. This standard covers the complete converter assembly together with its mounting arrangements containing semiconductor device assemblies; integrated cooling systems; integrated components like inductors, capacitors, transformers, resistors, contactors, switches; semiconductor drive units (SDU) and related sensors; incorporated protection circuits. The following types of power sources are taken into consideration: AC contact lines, DC contact lines, on-board supplies such as generators, batteries and other electric power sources. This standard excludes converters which provide the electronic control supply for semiconductor drive units (SDU) and other supplies relevant to the converter operation such as sensors. NOTE1 Electronic control equipment of converters and those sensors not related to semiconductor drive units and the printed circuit board assemblies of semiconductor drive units (SDU) are covered by IEC60571 . NOTE2 Combined tests with the whole traction system or auxiliary supply system are not within the scope of this standard. E.g. rules for combined tests of a motor fed by a converter are given in the IEC61377 series.

Committee
GEL/9
DevelopmentNote
Supersedes BS EN 50207 and 02/206745 DC. (02/2007) Supersedes 13/30264553 DC. (09/2014)
DocumentType
Standard
Pages
64
PublisherName
British Standards Institution
Status
Current
Supersedes

IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 60270:2000+AMD1:2015 CSV High-voltage test techniques - Partial discharge measurements
IEC 62236-3-1:2008 Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle
IEC 60349-1:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors
IEC 60050-702:1992 International Electrotechnical Vocabulary (IEV) - Part 702: Oscillations, signals and related devices
EN 60349-1:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors
EN 61377-2:2002 Railway applications - Rolling stock - Combined testing - Part 2: Chopper-fed direct current traction motors and their control
IEC 61373:2010 Railway applications - Rolling stock equipment - Shock and vibration tests
EN 60146-1-1:2010 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
EN 61377-3:2002 Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control system
IEC 60322:2001 Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction
IEC 60050-811:1991 International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
EN 61377-1:2006/corrigendum:2006 RAILWAY APPLICATIONS - ROLLING STOCK - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL SYSTEM
IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
EN 61373:2010/AC:2017-09 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010)
IEC 61148:2011 Terminal markings for valve device stacks and assemblies and for power conversion equipment
EN 60721-3-5:1997 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations
IEC 60076-10:2016 Power transformers - Part 10: Determination of sound levels
IEC 60721-3-5:1997 Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations
EN 61148:2012 Terminal markings for valve device stacks and assemblies and for power conversion equipment
IEC 60384-1:2016 Fixed capacitors for use in electronic equipment - Part 1: Generic specification
IEC 60850:2014 Railway applications - Supply voltages of traction systems
IEC 60050-551:1998 International Electrotechnical Vocabulary (IEV) - Part 551: Power electronics
EN 60384-4:2016 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
EN 60270:2001/A1:2016 HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS (IEC 60270:2000/A1:2015)
IEC 61377-2:2002 Railway applications - Rolling stock - Combined testing - Part 2: Chopper-fed direct current traction motors and their control
EN 60587:2007 Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion
EN 60112 : 2003 AMD 1 2009 METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
IEC 60349-2:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors
EN 62520:2011 Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters
EN 60076-10:2016 Power transformers - Part 10: Determination of sound levels
IEC 61377-3:2002 Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control system
CLC/TS 50535:2010 Railway applications - Onboard auxiliary power converter systems
EN 60349-2:2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
IEC 60146-1-1:2009 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 62278:2002 Railway applications - Specification and demonstration of reliability, availability, maintainability and safety (RAMS)
IEC 61991:2000 Railway applications - Rolling stock - Protective provisions against electrical hazards
IEC 60571:2012 Railway applications - Electronic equipment used on rolling stock
EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 62236-3-2:2008 Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
IEC 60349-4:2012 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
EN 60349-4:2013 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
IEC 62497-1:2010+AMD1:2013 CSV Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electricaland electronic equipment
IEC 60587:2007 Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion
EN 60384-1:2016 Fixed capacitors for use in electronic equipment - Part 1: Generic specification
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
IEC 60077-1:2017 Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
EN 60747-15:2012 Semiconductor devices - Discrete devices - Part 15: Isolated power semiconductor devices
IEC 62520:2011 Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters
EN 60322:2001 Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 61377-1:2006 Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system
IEC 60747-15:2010 Semiconductor devices - Discrete devices - Part 15: Isolated power semiconductor devices
IEC 60384-4:2016 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte
IEC 62498-1:2010 Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock
IEC 60310:2016 Railway applications - Traction transformers and inductors on board rolling stock

View more information
US$330.61
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.