BS EN 636 : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
07-03-2019
English
01-01-2012
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and subscripts
5 Classification system
6 General requirements
7 Requirements for plywood for use in dry conditions
8 Requirements for plywood for use in humid conditions
9 Requirements for plywood for use in exterior conditions
10 Supplementary properties
11 Verification of compliance
12 Marking, identification and documentation
Annex A (normative) - Supplementary properties
Bibliography
Defines the requirements for plywood, as defined in EN 313-2, for both general purpose use (non-structural application) and structural application in dry, humid or exterior conditions.
Committee |
B/541
|
DevelopmentNote |
Supersedes BS EN 636-1, BS EN 636-2 & BS EN 636-3 (08/2003) Supersedes 10/30234290 DC. (01/2013) 2012 Edition Re-Issued in April 2015 & incorporates AMD 1 2015. Supersedes 14/30300920 DC. (05/2015)
|
DocumentType |
Standard
|
Pages |
20
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
UNE-EN 636:2012 | Identical |
NBN EN 636 : 2012 + A1 2015 | Identical |
NEN EN 636 : 2012 + A1 2015 | Identical |
EN 636:2012+A1:2015 | Identical |
SN EN 636 : 2012 + A1 2015 | Identical |
NF EN 636 : 2012 + A1 2015 | Identical |
DIN EN 636:2015-05 | Identical |
NS EN 636 : 2012 + A1 2015 | Identical |
I.S. EN 636:2012 | Identical |
UNI EN 636 : 2013 | Identical |
08/30140202 DC : 0 | BS 8103-3 - STRUCTURAL DESIGN OF LOW-RISE BUILDINGS - PART 3: CODE OF PRACTICE FOR TIMBER FLOORS AND ROOFS FOR HOUSING |
BS 1133-8(2011) : 2011 | PACKAGING CODE - PART 8: GUIDANCE ON WOODEN BOXES, CASES AND CRATES |
BS 8203:2017 | Code of practice for installation of resilient floor coverings |
BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
BS 8203(2001) : 2001 | CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
DEFSTAN 81-27/7(2015) : 2015 | PLYWOOD FOR MILITARY PACKAGING APPLICATIONS |
DEFSTAN 81-148/1(2017) : 2017 | BOARD, PROCESSED WOOD FOR GENERAL PACKAGING |
DEFSTAN 81-41(PT2)/8(2015) : 2015 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
DEFSTAN 81-27/6(2008) : 2008 | PLYWOOD FOR MILITARY PACKAGING APPLICATIONS |
DEFSTAN 81-41(PT2)/7(2014) : 2014 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
BS 5385-3:2014 | Wall and floor tiling Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions. Code of practice |
11/30197409 DC : DRAFT JULY 2011 | BS 1133-8 - PACKAGING CODE - PART 8: GUIDANCE ON WOODEN BOXES, CASES AND CRATES - SECTION 8: WOODEN BOXES, CASES AND CRATES |
05/30121961 DC : DRAFT JUL 2005 | BS 4841-3 - RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) PRODUCTS FOR BUILDING AND END-USE APPLICATIONS - PART 3: SPECIFICATION FOR LAMINATED INSULATION BOARDS (ROOFBOARDS) WITH AUTO-ADHESIVELY BONDED FACINGS FOR USE AS ROOFBOARD THERMAL INSULATION FOR BUILT-UP ROOFS UNDER BITUMENISED ROOFING MEMBRANES |
BS 5268-2:2002 | STRUCTURAL USE OF TIMBER - PART 2: CODE OF PRACTICE FOR PERMISSIBLE STRESS DESIGN, MATERIALS AND WORKMANSHIP |
BS 8103-3:2009 | Structural design of low-rise buildings Code of practice for timber floors and roofs for housing |
BS 8217:2005 | Reinforced bitumen membranes for roofing. Code of practice |
BS 8201:2011 | Code of practice for installation of flooring of wood and wood-based panels |
BS 4841-3:2006 | Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications Specification for laminated boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under built up bituminous roofing membranes |
BS 4841-4:2006 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) products for building end-use applications Specification for laminated insulation boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under non-bituminous single-ply roofing membranes |
11/30209204 DC : 0 | BS 8201 - CODE OF PRACTICE FOR INSTALLATION OF FLOORING OF WOOD AND WOOD-BASED PANELS |
14/30283603 DC : 0 | BS 5385-3 - WALL AND FLOOR TILING - PART 3: DESIGN AND INSTALLATION OF INTERNAL ANDEXTERNAL CERAMIC AND MOSAIC FLOOR TILING IN NORMAL CONDITIONS - CODE OF PRACTICE |
05/30124175 DC : DRAFT JUL 2005 | BS 4841-4 - RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) PRODUCTS FOR BUILDING AND END-USE APPLICATIONS - PART 4: SPECIFICATION FOR LAMINATED INSULATION BOARDS (FLOORBOARDS) WITH AUTO-ADHESIVELY BONDED FACINGS FOR USE AS ROOFBOARD THERMAL INSULATION COVERED BY SINGLE-PLY NON-BITUMINISED ROOFING MEMBRANES |
BS 10075:2013 | Specification for Parkour equipment |
DEFSTAN 81-041(PT2)/9(2017) : 2017 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
12/30242848 DC : 0 | BS 10075 - SPECIFICATION FOR PARKOUR EQUIPMENT |
09/30174199 DC : 0 | BS 8203:2001+A1:2009 - CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
BS 8424:2004 | Building hardware. Pull handles. Requirements and test methods |
BIP 2198 : 2012 | CONCISE EUROCODE FOR DESIGN OF TIMBER STRUCTURES: BS EN 1995: EUROCODES 5 |
13/30271503 DC : 0 | BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
16/30348805 DC : 0 | BS 8203 - CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
EN 717-2:1994/AC:2002 | WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD |
EN 635-2:1995 | Plywood - Classification by surface appearance - Part 2: Hardwood |
CEN/TS 1099:2007 | Plywood - Biological durability - Guidance for the assessment of plywood for use in different use classes |
EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
CEN/TS 13810-2:2003 | Wood-based panels - Floating floors - Part 2: Test methods |
EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
EN 322:1993 | Wood-based panels - Determination of moisture content |
EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
EN 14272:2011 | Plywood - Calculation method for some mechanical properties |
EN 596:1995 | Timber structures - Test methods - Soft body impact test of timber framed walls |
EN 324-1:1993 | Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
EN 1195:1997 | Timber structures - Test methods - Performance of structural floor decking |
EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
EN 13446:2002 | Wood-based panels - Determination of withdrawal capacity of fasteners |
EN 13810-1:2002 | Wood-based panels - Floating floors - Part 1: Performance specifications and requirements |
EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
EN 635-1:1994 | Plywood - Classification by surface appearance - Part 1: General |
EN 594:2011 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
EN 324-2:1993 | Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness |
EN 323:1993 | Wood-based panels - Determination of density |
EN 315:2000 | Plywood - Tolerances for dimensions |
EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
EN 335-3:1995 | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
EN 313-1:1996 | Plywood - Classification and terminology - Part 1: Classification |
EN 313-2:1999 | Plywood - Classification and terminology - Part 2: Terminology |
EN 314-2:1993 | Plywood - Bonding quality - Part 2: Requirements |
EN 1995-1-1:2004/A2:2014 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
EN 635-3:1995 | Plywood - Classification by surface appearance - Part 3: Softwood |
CEN/TS 635-4:2007 | Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline |
EN 12369-2:2011 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
EN 635-5:1999 | Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects |
EN 314-1:2004 | Plywood - Bonding quality - Part 1: Test methods |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.