BS EN 81-1 : 1998
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
08-31-2014
English
01-01-1998
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Units and symbols
5 Lift well
6 Machinery and pulley spaces
7 Landing doors
8 Car, counterweight and balancing weight
9 Suspension, compensation, overspeed protection and
protection against unintended car movement
10 Guide rails, buffers and final limit switches
11 Clearances between car and wall facing the car
entrance, and between car, counterweight or balancing
weight
12 Lift machine
13 Electric installations and appliances
14 Protection against electric faults; controls; priorities
15 Notices, markings and operating instructions
16 Examinations - Tests - Register - Maintenance
Annex A (normative) - List of the electric safety devices
Annex B (normative) -Unlocking triangle
Annex C (informative) - Technical dossier
Annex D (normative) - Examinations and tests before putting
into service
Annex E (informative) - Periodical examinations and tests,
examinations and tests after an important
modification or after an accident
Annex F (normative) - Safety components - Test procedures
for verification of conformity
Annex G (informative) - Proof of guide rails
Annex H (normative) - Electronic components - Failure
exclusion
Annex J (normative) - Pendulum shock tests
Annex K (normative) - Top clearances for traction drive
lifts
Annex L (normative) - Necessary buffer stroke
Annex M (informative) - Traction evaluation
Annex N (normative) - Evaluation of safety factor for
suspension ropes
Annex O (informative) - Machinery spaces - Access
Annex P (informative) - Description of possible measures
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EC
Directive 95/16/EC amended by Directive 2006/42/EC
Describes safety rules for the construction and installation of permanently installed new electric lifts, with traction or positive drive, serving defined landing levels, having a car designed for the transportation of persons or persons and goods, suspended by ropes or chains and moving between guide rails inclined not more than 15 degrees to the vertical.
| Committee |
MHE/4
|
| DevelopmentNote |
Supersedes 85/76022 DC Supersedes BS 5655-1(1986) which remains current. (04/2005) Supersedes 94/704657 DC (09/2005) Supersedes 00/707656 DC and 00/715076 DC. (04/2006) 1998 Edition Re-Issued in March 2010 & incorporates AMD 3 2009. Supersedes 09/30187712 DC. (03/2010) Superseded by BS EN 81-20 & BS EN 81-50, but remains current and will be withdrawn on 06/08/2017. (08/2014)
|
| DocumentType |
Standard
|
| Pages |
222
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SN EN 81-1 : 1998 + A3 2009 | Identical |
| EN 81-1:1998+A3:2009 | Identical |
| I.S. EN 81-1:1999 | Identical |
| NF EN 81-1 : 1998 + A3 2010 | Identical |
| UNI EN 81-1 : 2010 | Identical |
| NBN EN 81-1 : 1998 + A3 2010 | Identical |
| DIN EN 81-1:2010-06 | Identical |
| NEN EN 81-1 : 1998 + A3 2010 | Identical |
| NS EN 81-1 : 1998 + A3 2009 | Identical |
| DIN EN 81-1:2000-05 | Identical |
| 12/30270897 DC : 0 | BS 9266 - DESIGN OF ACCESSIBLE AND ADAPTABLE GENERAL NEEDS HOUSING - CODE OF PRACTICE LARGE PRINT VERSION |
| 16/30337004 DC : DRAFT MAR 2016 | BS 8899 - IMPROVEMENT OF FIRE-FIGHTING AND EVACUATION PROVISIONS IN EXISTING LIFTS - CODE OF PRACTICE |
| BS DD265(2008) : 2008 | PROTOCOL FOR COMMUNICATIONS BETWEEN A LIFT ALARM SYSTEM AND AN ALARM RECEIVING STATION (RESCUE CENTRE) - SPECIFICATION |
| DEFSTAN 02-113/2(2010) : 2010 | REQUIREMENTS FOR MECHANICAL HANDLING |
| DEFSTAN 02-113/1(2005) : 2005 | REQUIREMENT FOR MECHANICAL HANDLING |
| BS DD9999(2005) : 2005 | CODE OF PRACTICE FOR FIRE SAFETY IN THE DESIGN, CONSTRUCTION AND USE OF BUILDINGS |
| BS 7671(2008) : 2018 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
| BS 6440:2011 | Powered vertical lifting platforms having non-enclosed or partially enclosed liftways intended for use by persons with impaired mobility. Specification |
| 11/30227604 DC : 0 | BS 5266-1 - EMERGENCY LIGHTING - PART 1: CODE OF PRACTICE FOR THE EMERGENCY ESCAPE LIGHTING OF PREMISES |
| BIP 3043 : 2005 | BS 8300 - DESIGN OF BUILDINGS AND THEIR APPROACHES TO MEET THE NEEDS OF DISABLED PEOPLE - CODE OF PRACTICE |
| 12/30230430 DC : 0 | BS 9266 - DESIGN OF ACCESSIBLE AND ADAPTABLE GENERAL NEEDS HOUSING - CODE OF PRACTICE |
| BS 8899:2016 | Improvement of fire-fighting and evacuation provisions in existing lifts. Code of practice |
| BS 5266-1:2011 | Emergency lighting Code of practice for the emergency escape lighting of premises |
| BIP 2081 : 2012 | A GUIDE TO EMERGENCY LIGHTING |
| BS 8486-1(2007) : 2007 | EXAMINATION AND TEST OF NEW LIFTS BEFORE PUTTING INTO SERVICE - SPECIFICATION FOR MEANS OF DETERMINING COMPLIANCE WITH BS EN 81 - PART 1: ELECTRIC LIFTS |
| BS 5655-11:2005 | Lifts and service lifts Code of practice for the undertaking of modifications to existing electric lifts |
| BS 7255:2001 | Code of practice for safe working on lifts |
| BS 5588-5:2004 | Fire precautions in the design, construction and use of buildings Access and facilities for fire-fighting |
| BS 5900:2012 | Powered homelifts with partially enclosed carriers and no liftway enclosures. Specification |
| BS 8300(2009) : 2009 | DESIGN OF BUILDINGS AND THEIR APPROACHES TO MEET THE NEEDS OF DISABLED PEOPLE - CODE OF PRACTICE |
| BS 9266:2013 | Design of accessible and adaptable general needs housing. Code of practice |
| 08/30182649 DC : DRAFT MAY 2008 | BS 8300 - DESIGN OF BUILDINGS AND THEIR APPROACHES TO MEET THE NEEDS OF DISABLED PEOPLE - CODE OF PRACTICE |
| BS 8300:2001 | Design of buildings and their approaches to meet the needs of disabled people. Code of practice |
| 05/30128010 DC : DRAFT JUL 2005 | BS 5655-11 - LIFTS AND SERVICE LIFTS - PART 11: CODE OF PRACTICE FOR THE UNDERTAKING OF MODIFICATIONS TO EXISTING ELECTRIC LIFTS |
| 11/30228478 DC : 0 | BS 7255 - CODE OF PRACTICE FOR SAFE WORKING ON LIFTS |
| 10/30228280 DC : 0 | BS 8486-1+A1 - EXAMINATION AND TEST OF NEW LIFTS BEFORE PUTTING INTO SERVICE - SPECIFICATION FOR MEANS OF DETERMINING COMPLIANCE WITH BS EN 81 - PART 1: ELECTRIC LIFTS |
| BS 7255:2012 | Code of practice for safe working on lifts |
| 11/30194294 DC : 0 | BS 6440 - POWERED LIFTING PLATFORMS WITH NON-ENCLOSED LIFTWAYS FOR USE BY PERSONS WITH LIMITED MOBILITY - SPECIFICATION |
| BIP 3044 : 2005 | BS 8300 - DESIGN OF BUILDINGS AND THEIR APPROACHES TO MEET THE NEEDS OF DISABLED PEOPLE - CODE OF PRACTICE |
| BS 5655-6:2002 | Lifts and service lifts Code of practice for the selection and installation of new lifts |
| 06/30147218 DC : 0 | BS 8486-1 - EXAMINATION AND TEST OF NEW LIFTS BEFORE PUTTING INTO SERVICE - SPECIFICATION FOR MEANS OF DETERMINING COMPLIANCE WITH BS EN 81 - PART 1: ELECTRIC LIFTS |
| 11/30194292 DC : 0 | BS 5900 - POWERED HOME LIFTS WITH FULLY OR PARTIALLY ENCLOSED CARS AND NO LIFT-WELL ENCLOSURES - SPECIFICATION |
| BS 7671(2008) : 2008 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| EN 12015:2014 | Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission |
| EN 12016:2013 | Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
| EN 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements |
| EN 50214:2006/corrigendum Dec. 2007 | FLAT POLYVINYL CHLORIDE SHEATHED FLEXIBLE CABLES |
| EN 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
| HD 21-3 : S3 AMD 2 2008 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - NON-SHEATHED CABLES FOR FIXED WIRING |
| HD 21.5 S3:1994/A2:2001 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 5: FLEXIBLE CABLES (CORDS) |
| HD 214 : 200S2 | RECOMMENDED METHOD FOR DETERMINING THE COMPARATIVE TRACKING INDEX OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| HD 384.4.41 S2:1996/A1:2002 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - CHAPTER 41: PROTECTION AGAINST ELECTRIC SHOCK |
| EN 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures |
| ISO 7465:2007 | Passenger lifts and service lifts — Guide rails for lift cars and counterweights — T-type |
| EN 60249-2-3 : 1994 AMD 4 2000 | BASE MATERIALS FOR PRINTED CIRCUITS - PART 2: SPECIFICATIONS - SPECIFICATION NO. 3: EPOXIDE CELLULOSE PAPER COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) |
| EN 60950:2000/corrigendum:2002 | SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT |
| HD 384.6.61 : 200S2 | ELECTRICAL INSTALLATIONS OF BUILDINGS - VERIFICATION - INITIAL VERIFICATION |
| IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
| IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| HD 323.2.14 : 200S2 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST N: OF TEMPERATURE |
| IEC 60747-5:1992 | Semiconductor devices - Discrete devices and integrated circuits -Part 5: Optoelectronic devices |
| EN 60742:1995 | Isolating transformers and safety isolating transformers - Requirements |
| HD 22-4 : 200S4 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 4: CORDS AND FLEXIBLE CABLES |
| EN 60249-2-2 : 1994 AMD 5 2000 | BASE MATERIALS FOR PRINTED CIRCUITS - PART 2: SPECIFICATIONS - SPECIFICATION NO. 2: PHENOLIC CELLULOSE PAPER COPPER-CLAD LAMINATED SHEET, ECONOMIC QUALITY |
| HD 21.1 : 200S4 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING THERMOPLASTIC INSULATION - GENERAL REQUIREMENTS |
| EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| EN 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
| 1995/16/EC : 1995 | DIRECTIVE 95/16/EC OF 29 JUNE 1995 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO LIFTS |
| EN 60947-4-1 : 2010 AMD 1 2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012) |
| HD 360 : S2 AMD 1 | CIRCULAR RUBBER INSULATED LIFT CABLES FOR NORMAL USE |
| EN 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels |
| HD 384.5.54 : 200S1 | ELECTRICAL INSTALLATION OF BUILDINGS - SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS |
| EN 60068-2-29:1993 | Environmental testing - Part 2: Tests - Test Eb and guidance: Bump |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| IEC 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508) |
| EN 62326-1:2002 | Printed boards - Part 1: Generic specification |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
| HD 21 PT4 : 200S2 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 4: SHEATHED CABLES FOR FIXED WIRING |
| EN 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.