• There are no items in your cart

BS EN ISO 10437:2003

Current
Current

The latest, up-to-date edition.

Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

04-08-2003

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Dimensions
5 Statutory requirements
6 Basic design
   6.1 General
   6.2 Nameplates and rotation arrows
7 Casings
   7.1 Pressure casings
   7.2 Casing connections
   7.3 Internal stationary components
   7.4 External forces and moments
8 Rotating elements
   8.1 General
   8.2 Shafts
   8.3 Blading
   8.4 Speed-sensing element
9 Rotor dynamics
   9.1 General
   9.2 Lateral analysis
   9.3 Unbalanced rotor response verification test
   9.4 Additional testing
   9.5 Torsional analysis
   9.6 Vibration and balancing
10 Bearings, bearing housings, and seals
   10.1 Radial bearings
   10.2 Thrust bearings and collars
   10.3 Bearing housing
   10.4 Grounding
   10.5 Shaft seals
11 Materials
   11.1 General
   11.2 Castings
   11.3 Welding
12 Controls and instrumentation
   12.1 General
   12.2 Turbine governing system
   12.3 Overspeed shutdown system
        12.3.1 General
        12.3.2 Electronic overspeed detection system
        12.3.3 Electro-hydraulic solenoid valves
        12.3.4 Trip valves/combined trip and throttle valves
   12.4 Other alarms and shutdowns
   12.5 Instrument and control panels
   12.6 Indicating instrumentation
        12.6.1 Tachometers
        12.6.2 Temperature gauges
        12.6.3 Thermowells
        12.6.4 Thermocouples and resistance temperature
               detectors
        12.6.5 Pressure gauges
13 Electrical systems
14 Piping and appurtenances
   14.1 General
   14.2 Oil piping
   14.3 Instrument piping
15 Accessories
   15.1 Couplings and guards
   15.2 Gear units
   15.3 Mounting plates
        15.3.1 General
        15.3.2 Baseplates
        15.3.3 Soleplates and subplates
   15.4 Relief valves
   15.5 Lubrication and control-oil system
   15.6 Gland vacuum systems
   15.7 Insulation and jacketing
   15.8 Turning gear
   15.9 Special tools
16 Inspection, testing and preparation for shipment
   16.1 General
   16.2 Inspection
        16.2.1 General
        16.2.2 Materials inspection
        16.2.3 Mechanical inspection
   16.3 Testing
        16.3.1 General
        16.3.2 Casing pressure hydro tests
        16.3.3 Mechanical running test
        16.3.4 Optional tests and inspections
   16.4 Preparation for shipment
17 Vendor's information
   17.1 General
   17.2 Proposals
        17.2.1 General
        17.2.2 Drawings
        17.2.3 Technical data
        17.2.4 Curves
   17.3 Contract data
        17.3.1 General
        17.3.2 Drawings and technical data
        17.3.3 Parts lists and recommended spares
        17.3.4 Installation, operation, maintenance and
               technical manuals
Annex A (informative) Typical data sheets
Annex B (informative) Steam turbine nomenclature
Annex C (normative) Procedures for determining residual
        unbalance
Annex D (informative) Alarm and shutdown systems
Annex E (normative) Coupling guards
Annex F (informative) Foundation drawings
Annex G (informative) Gland sealing and leak-off system
Annex H (informative) Typical inspection of components
Annex I (informative) Inspector's checklist
Annex J (informative) Vendor drawing and data requirements
        (VDDR)
Bibliography

Provides requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of steam turbines for special-purpose applications. It also covers the related lube-oil systems, instrumentation, control systems and auxiliary equipment.

This International Standard specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of steam turbines for special-purpose applications. It also covers the related lube-oil systems, instrumentation, control systems and auxiliary equipment. It is not applicable to general-purpose steam turbines, which are covered in ISO 10436.

NOTE For the purpose of this provision, API Std 611 is equivalent to ISO 10436.

Committee
PSE/17/-/6
DevelopmentNote
Supersedes 00/702245 DC. (01/2007)
DocumentType
Standard
Pages
126
PublisherName
British Standards Institution
Status
Current
Supersedes

ISO 15649:2001 Petroleum and natural gas industries — Piping
NACE 3 : 2007 COMMERCIAL BLAST CLEANING
ISO 7005-2:1988 Metallic flanges — Part 2: Cast iron flanges
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
NEMA SM 23-1991 (R1997, R2002) STEAM TURBINES FOR MECHANICAL DRIVE SERVICE
API 520-1 : 2014 SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION
ISO 724:1993 ISO general-purpose metric screw threads — Basic dimensions
API 614 : 2008 LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
ASME B16.42 : 2016 DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300
IEC 60045-1:1991 Steam turbines - Part 1: Specifications
ASME B31.3:2016 PROCESS PIPING
ISO 1940-1:2003 Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances
ISO 10436:1993 Petroleum and natural gas industries — General-purpose steam turbines for refinery service
NACE MR 01 75 : 2003 METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS
ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
ASME B17.1 : 1967 KEYS AND KEYSEATS
API 670 : 2014 MACHINERY PROTECTION SYSTEMS
ISO 8821:1989 Mechanical vibration Balancing Shaft and fitment key convention
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
API 526 : 2017 FLANGED STEEL PRESSURE-RELIEF VALVES
ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ISO 261:1998 ISO general purpose metric screw threads General plan
API 686 : 2009 RECOMMENDED PRACTICE FOR MACHINERY INSTALLATION AND INSTALLATION DESIGN
ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
ISO 10441:2007 Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications
AWS D1.1 : 2000 STRUCTURAL WELDING CODE - STEEL
ASTM A 515/A515M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
ASME B16.47 : 2017 LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD
ISO 3448:1992 Industrial liquid lubricants — ISO viscosity classification
API 520-2 : 2015 SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION
ISO 10494:1993 Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method
ISO 8068:2006 Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines

View more information
US$383.32
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.