• There are no items in your cart

BS EN ISO 14693:2003

Current
Current

The latest, up-to-date edition.

Petroleum and natural gas industries. Drilling and well-servicing equipment
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

02-10-2004

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
   3.1 Terms and definitions
   3.2 Abbreviated terms
4 Design
   4.1 Design conditions
   4.2 Strength analysis
   4.3 Size class designation
   4.4 Rating
   4.5 Load rating basis
   4.6 Design safety factor
   4.7 Shear strength
   4.8 Specific equipment
   4.9 Design documentation
5 Design verification
   5.1 General
   5.2 Design verification function test
   5.3 Design verification pressure test
   5.4 Design verification load test
   5.5 Determination of rated load
   5.6 Alternative design verification test procedure and rating
   5.7 Design verification load-testing apparatus
   5.8 Design changes
   5.9 Records
6 Materials requirements
   6.1 General
   6.2 Written specifications
   6.3 Mechanical properties
   6.4 Material qualification
   6.5 Manufacture
   6.6 Chemical composition
7 Welding requirements
   7.1 General
   7.2 Welding qualification
   7.3 Written documentation
   7.4 Control of consumables
   7.5 Weld properties
   7.6 Post-weld heat treatment
   7.7 Quality control requirements
   7.8 Specific requirements - Fabrication welds
   7.9 Specific requirements - Repair welds
8 Quality control
   8.1 General
   8.2 Quality control personnel qualifications
   8.3 Measuring and test equipment
   8.4 Quality control for specific equipment and components
   8.5 Dimensional verification
   8.6 Proof load testing
   8.7 Hydrostatic testing
   8.8 Functional testing
9 Equipment
   9.1 General
   9.2 Rotary tables
   9.3 Rotary bushings
   9.4 Rotary slips
   9.5 Spiders not capable of use as elevators
   9.6 Safety clamps not used as a hoisting device
   9.7 Manual tongs
   9.8 Power tongs
   9.9 Drawworks components
   9.10 Rotary hose
   9.11 Piston mud-pump components
   9.12 Antifriction bearings
10 Marking
   10.1 Product marking
   10.2 Marking method
11 Documentation
   11.1 Record retention
   11.2 Documentation to be kept by the manufacturer
   11.3 Documentation to be delivered with the equipment
Annex A (normative) Supplementary requirements
      A.1 Introduction
      A.2 SR1 - Proof load testing
      A.3 SR2 - Low-temperature testing
      A.4 SR2A - Additional low-temperature testing
      A.5 SR3 - Data book
      A.6 SR4 - Additional volumetric examination of castings
      A.7 SR5 - Volumetric examination of wrought material
Annex B (informative) Guidance for qualification of heat-treatment
        equipment
      B.1 Temperature tolerance
      B.2 Furnace calibration
      B.3 Instruments
Annex C (informative) Drilling machinery component dimensions
        expressed in US customary units
Annex D (informative) Recommended piston mud-pump nomenclature
        and maintenance
      D.1 Piston mud-pump nomenclature
      D.2 Old designs
      D.3 Types
      D.4 Designation
Bibliography

Gives general principles and specifies requirements for design, manufacture and testing of new drilling and well-servicing equipment and of replacement primary load-carrying components manufactured subsequent to the publication of ISO 14693:2003.

This International Standard provides general principles and specifies requirements for design, manufacture and testing of new drilling and well-servicing equipment and of replacement primary load-carrying components manufactured subsequent to the publication of this International Standard. This International Standard is applicable to the following equipment: rotary tables; rotary bushings; rotary slips; rotary hoses; piston mud-pump components; drawworks components; spiders not capable of use as elevators; manual tongs; safety clamps not used as hoisting devices; power tongs, including spinning wrenches. AnnexA gives a number of standardized supplementary requirements which apply only when specified.

Committee
PSE/17/-/4
DevelopmentNote
Supersedes 00/710338 DC (02/2004)
DocumentType
Standard
Pages
92
PublisherName
British Standards Institution
Status
Current
Supersedes

ASTM E 446 : 2015 : REDLINE Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
ASNT SNT TC 1A : 2016 TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
ASTM E 186 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings
ISO/TR 9769:1991 Steel and iron Review of available methods of analysis
ASME PV CODE 9 : 2017 BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
MIL-H-6875 Revision H:1989 HEAT TREATMENT OF STEEL RAW MATERIALS
ISO 6892:1998 Metallic materials Tensile testing at ambient temperature
API 7K : 2015 DRILLING AND WELL SERVICING EQUIPMENT
AGMA 6010 : F STANDARD FOR SPUR, HELICAL, HERRINGBONE AND BEVEL ENCLOSED DRIVES
ASME PV CODE 8 DIV 3 : 2017 BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS
ISO 148:1983 Steel — Charpy impact test (V-notch)
AWS QC1 : 2007 STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS
API 7 : 2001 SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
ASTM E 125 : 1963 : R2003 Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
ASME PV CODE 5 : 2017 BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION
ASTM E 280 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings
SAE AS 1260 : 2014 EQUIVALENT SECTIONS OF CERTAIN SHAPES TO ROUND BARS
MIL-STD-120 Base Document:1950 GAGE INSPECTION
ISO 7500-1:2015 Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system
ASTM E 709 : 2015 : REDLINE Standard Guide for Magnetic Particle Testing
AWS D1.1 : 2000 STRUCTURAL WELDING CODE - STEEL
ISO 10012-1:1992 Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment
AGMA 2004 : C GEAR MATERIALS, HEAT TREATMENT AND PROCESSING MANUAL

View more information
US$335.40
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.