• There are no items in your cart

BS EN ISO 1519:2011

Current
Current

The latest, up-to-date edition.

Paints and varnishes. Bend test (cylindrical mandrel)
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-31-2011

Foreword
Introduction
1 Scope
2 Normative references
3 Principle
4 Apparatus
5 Sampling
6 Test panels
7 Procedure
8 Expression of results
9 Precision
10 Test report
Bibliography

Describes an empirical test procedure for assessing the resistance of a coating of paint, varnish or related product to cracking and/or detachment from a metal or plastics substrate when subjected to bending round a cylindrical mandrel under standard conditions.

This International Standard specifies an empirical test procedure for assessing the resistance of a coating of paint, varnish or related product to cracking and/or detachment from a metal or plastics substrate when subjected to bending round a cylindrical mandrel under standard conditions.

For a multi-coat system, each coat can be tested separately or the complete system can be tested.

The method specified can be carried out

  • either as a “pass/fail?? test, by carrying out the test with a single specified size of mandrel, to assess compliance with a particular requirement;

  • or by repeating the procedure using successively smaller mandrels to determine the diameter of the first mandrel over which the coating cracks and/or becomes detached from the substrate.

Two types of apparatus are specified, type1 being appropriate for use on test panels of thickness up to 0,3mm, and type2 for use on test panels of thickness up to 1,0mm. Both types of apparatus have been found to give similar results with the same coating, but normally only one will be used for testing a given product.

Committee
STI/10
DevelopmentNote
Supersedes BS 3900-E1(1970) and BS 3900-E1(1995). Supersedes 97/125682 DC. Supersedes 09/30196695 DC. (02/2011) Supersedes BS 3900-E1(2002). (02/2011)
DocumentType
Standard
Pages
20
PublisherName
British Standards Institution
Status
Current
Supersedes

SAE AMS 79-015 : 2017 COMPOUND, CLEANING GEL FOR AIRCRAFT SURFACES
BS 5X 17(1998) : 1998 SPECIFICATION FOR OLEORESINOUS VARNISH FOR AEROSPACE PURPOSES
DEFSTAN 80-125/5(2017) : 2017 PAINT, FINISHING, EMULSION FOR CANVAS TYPES: BRUSHING OR SPRAYING
DEFSTAN 80-27/5(2009) : 2009 PAINT, AMMUNITION FINISHING, BRUSHING, SPRAYING AND DIPPING TYPES: SEMI-GLOSS; MATT
DEFSTAN 80-224/1(2011) : 2011 PAINT, ANTI-SLIP, TYPE: BRUSHING
DEFSTAN 79-17/2(1998) : 1998 COMPOUND, CLEANING, FOAMING, FOR AIRCRAFT SURFACES
DEFSTAN 80-72/3(2006) : 2006 PAINT SYSTEM, ACID AND ALKALI RESISTING
DEFSTAN 80-125/4(2011) : 2011 PAINT, FINISHING, EMULSION FOR CANVAS TYPES: BRUSHING OR SPRAYING
DEFSTAN 80-65/3(2009) : 2009 PAINT, FINISHING, FOR THE INTERIOR OF JERRICANS
DEFSTAN 80-31/3(1998) : 1998 PAINT, FINISHING, GENERAL SERVICE, ALUMINIUM TYPE: BRUSHING/SPRAYING
DEFSTAN 79-15/2(1998) : 1998 COMPOUND, CLEANING GEL FOR AIRCRAFT SURFACES
DEFSTAN 80-41/3(2000) : 2000 PAINT FINISHING, DEFENCE EQUIPMENT MATT TYPE: BRUSHING SPRAYING
DEFSTAN 80-60/3(1998) : 1998 PAINT, SYSTEM, STOVING, HAMMER, FINISH, SPRAYING
DEFSTAN 80-216/2(2012) : 2012 PAINT, FILLER, EPOXY, SPRAYING, MULTI-PACK
DEFSTAN 80-214/2(2002) : 2002 PAINT, FINISH, SELECTIVELY STRIPPABLE, ACRYLIC TYPES: BRUSHING SPRAYING
DEFSTAN 80-037/4(2017) : 2017 PAINT, FINISHING, OIL-RESISTING TYPES: BRUSHING OR SPRAYING
DEFSTAN 80-37/3(2011) : 2011 PAINT, FINISHING, OIL-RESISTING - TYPES: BRUSHING OR SPRAYING
DEFSTAN 80-30/3(1998) : 1998 PAINT, FINISHING, GASOLINE-RESISTANT TYPES: BRUSHING SPRAYING
DEFSTAN 80-164/3(2009) : 2009 PAINT, SYSTEM, FLUORESCENT
DEFSTAN 80-215/3(2017) : 2017 PAINT, FINISHING, TEMPORARY COLOUR, ALKALI REMOVABLE, NON-AEROSPACE USE
DEFSTAN 80-37/2(2006) : 2006 PAINT, FINISHING, CELLULOSE NITRATE, OIL RESISTING TYPES: BRUSHING, SPRAYING
DEFSTAN 80-31/4(2005) : 2005 PAINT, FINISHING, GENERAL SERVICE ALUMINIUM TYPE: BRUSHING OR SPRAYING
DEFSTAN 80-214/3(2009) : 2009 PAINT, FINISH, SELECTIVELY STRIPPABLE, ACRYLIC - TYPES: BRUSHING, SPRAYING
DEFSTAN 80-65/2(1998) : 1998 PAINT, FINISHING FOR JERRICANS, STOVING TYPES: INTERIOR EXTERIOR
DEFSTAN 80-218/3(2017) : 2017 TEMPORARY COLOUR COATING (TCC) REMOVER, NON-AIRCRAFT USE
DEFSTAN 80-27/4(1998) : 1998 PAINT, AMMUNITION FINISHING, BRUSHING, SPRAYING AND DIPPING TYPES: SEMI GLOSS MATT
DEFSTAN 80-031/6(2017) : 2017 PAINT, FINISHING, GENERAL SERVICE, ALUMINIUM - TYPE: BRUSHING OR SPRAYING
DEFSTAN 80-054/6(2017) : 2017 PAINT, FINISHING, GENERAL SERVICE, FUEL RESISTANT, GLOSS - TYPE: BRUSHING OR SPRAYING
DEFSTAN 80-207/2(2003) : 2003 PAINT, PRIMING, ZINC CHROMATE, NON AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK
DEFSTAN 80-31/5(2012) : 2012 PAINT, FINISHING, GENERAL SERVICE, ALUMINIUM TYPE: BRUSHING OR SPRAYING
DEFSTAN 80-138/3(2007) : 2007 VARNISH, POLYURETHANE, MULTI-PACK TYPES: MATT AND GLOSS
DEFSTAN 80-128/3(2004) : 2004 PAINT, FINISHING, TEMPORARY CAMOUFLAGE, ALKALI REMOVABLE FOR AEROSPACE USE
DEFSTAN 80-54/5(2010) : 2010 PAINT, FINISHING, GENERAL SERVICE, FUEL RESISTANT, GLOSS - TYPE: BRUSHING OR SPRAYING
DEFSTAN 80-129/3(1998) : 1998 VARNISH, ELECTRICAL INSULATING, BRUSHING - TYPE 1: STANDARD - TYPE 2: FUNGICIDAL
DEFSTAN 80-129/5(2010) : 2010 VARNISH, ELECTRICAL INSULATING, BRUSHING OR SPRAYING - TYPE 1: STANDARD, TYPE 2: FUNGICIDAL
DEFSTAN 80-138/4(2009) : 2009 VARNISH, POLYURETHANE, MULTI-PACK - TYPES: MATT AND GLOSS
DEFSTAN 80-218/2(2006) : 2006 TEMPORARY COLOUR COATING (TCC) REMOVER, NON-AIRCRAFT USE
DEFSTAN 80-124/3(2017) : 2017 PAINT, PRIMING, DEFENCE EQUIPMENT, STOVING - TYPES: SPRAYING AND DIPPING
DEFSTAN 80-222/1(2007) : 2007 SURFACE DEGREASING CLEANER FOR AEROSPACE PURPOSES
DEFSTAN 80-129/4(2005) : 2005 VARNISH ELECTRICAL INSULATING, BRUSHING OR SPRAYING - TYPE 1: STANDARD, TYPE 2: FUNGICIDAL
DEFSTAN 68-148/2(1998) : 1998 SOLVENT FOR CLEANING ELECTRICAL AND AEROSPACE EQUIPMENT
DEFSTAN 80-206/2(2003) : 2003 PAINT, PRIMING, ZINC PHOSPHATE, NON AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK
DEFSTAN 05-50(PT23)/2(1997) : 1997 METHODS FOR TESTING FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS - PART 23: METHODS FOR CORROSION PREVENTATIVES
DEFSTAN 80-48/3(1999) : 1999 PAINT, FINISHING, GENERAL SERVICE, GLOSS, STOVING, SPRAYING
DEFSTAN 80-065/4(2017) : 2017 PAINT, FINISHING, FOR THE INTERIOR OF JERRICANS
DEFSTAN 80-164/2(1998) : 1998 PAINT SYSTEM, FLUORESCENT
DEFSTAN 80-215/2(2006) : 2006 PAINT, FINISHING, TEMPORARY COLOUR, ALKALI REMOVABLE, NON-AEROSPACE USE
BS 2X 26:2001 Doping and finishing schemes for fabric covered aircraft
DEFSTAN 80-218/1(2005) : 2005 TEMPORARY CAMOUFLAGE COATING (TCC) REMOVER (NON - AIRCRAFT USE)
DEFSTAN 80-206/3(2009) : 2009 PAINT, PRIMING, ZINC PHOSPHATE, NON-AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK
DEFSTAN 80-207/3(2009) : 2009 PAINT, PRIMING, ZINC CHROMATE, NON-AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK
BS 1722-16:2009 Fences Specification for powder coatings used as a plastics finish to components and mesh
BS 7664:2000 Specification for undercoat and finishing paints
14/30290243 DC : 0 BS 5X 17:1998+A1 - SPECIFICATION FOR OLEORESINOUS VARNISH FOR AEROSPACE PURPOSES
BS 4756:1998 Specification for ready-mixed aluminium priming paints for woodwork
14/30290247 DC : 0 BS X38:2005 + A1 - HEAT CURING PAINT SCHEME FOR AEROSPACE PURPOSES - SPECIFICATION
SAE AMS 79-017 : 2017 COMPOUND, CLEANING, FOAMING, FOR AIRCRAFT SURFACES
07/30139517 DC : 0 BS 1722-16 - FENCES - PART 16: SPECIFICATION FOR POWDER COATINGS USED AS A PLASTICS FINISH TO COMPONENTS AND MESH
DEFSTAN 80-131/2(2012) : 2012 PAINT, ALUMINIUM, HEAT RESISTING TYPE: BRUSHING
DEFSTAN 80-131/3(2017) : 2017 PAINT, ALUMINIUM, HEAT RESISTING - TYPE: BRUSHING
BS X38(2005) : 2005 HEAT CURING PAINT SCHEME FOR AEROSPACE PURPOSES - SPECIFICATION
DEFSTAN 80-161/2(2002) : 2002 PAINT, FINISHING, SPRAYING, EPOXY, MULTI-PACK

ISO 1514:2016 Paints and varnishes — Standard panels for testing
ISO 2808:2007 Paints and varnishes Determination of film thickness
ISO 15528:2013 Paints, varnishes and raw materials for paints and varnishes Sampling
ISO 1513:2010 Paints and varnishes Examination and preparation of test samples
ISO 3270:1984 Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing

View more information
US$160.51
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.