• There are no items in your cart

BS EN ISO 3672-2:2001

Current
Current

The latest, up-to-date edition.

Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

05-14-2002

Foreword
Introduction
1 Scope
2 Normative references
3 Preparation of test specimens
  3.1 General
  3.2 Pretreatment of materials
  3.3 Preparation of the sheets
  3.4 Cutting out test specimens
4 Conditioning of test specimens
5 Determination of properties

Gives the methods of preparation of test specimens and test methods used for the determination of the properties of unsaturated-polyester resins. Also gives the requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing. The properties of crosslinked unsaturated-polyester resins have been selected from the general test methods in ISO 10350-1. Other test methods in wide use for, or of particular significance to, unsaturated-polyester resins (particularly properties useful for the processing of non-crosslinked resins) are also included in this part of ISO 3672.

Committee
PRI/42
DevelopmentNote
Renumbers and supersedes BS ISO 3672-2 Supersedes 96/121473 DC. (11/2001) 2001 Version incorporates amendment 13326 to BS ISO 3672-2. (10/2005)
DocumentType
Standard
Pages
22
PublisherName
British Standards Institution
Status
Current
Supersedes

IEC 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
IEC 60695-11-20:2015 Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
ISO 2719:2016 Determination of flash point Pensky-Martens closed cup method
ISO 6603-2:2000 Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
ISO 2535:2001 Plastics Unsaturated-polyester resins Measurement of gel time at ambient temperature
EN ISO 62:2008 Plastics - Determination of water absorption (ISO 62:2008)
ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid value
ISO 3521:1997 Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage
EN ISO 8256:2004 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
ISO 3167:2014 Plastics Multipurpose test specimens
EN ISO 2114:2000/AC:2005 PLASTICS (POLYESTER RESINS) AND PAINTS AND VARNISHES (BINDERS) - DETERMINATION OF PARTIAL ACID VALUE AND TOTAL ACID VALUE
IEC 60250:1969 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
ISO 3219:1993 Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate
ISO 14848:1998 Plastics — Unsaturated-polyester resins — Determination of reactivity at 130 degrees C
EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
ISO 6271:2015 Clear liquids Estimation of colour by the platinum-cobalt colour scale
ISO 10350-1:2017 Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
ISO 8256:2004 Plastics — Determination of tensile-impact strength
EN ISO 1675:1998 Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985)
EN ISO 604 : 2003 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES (ISO 604:2002)
ISO 11359-2:1999 Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
ISO 3672-1:2000 Plastics Unsaturated-polyester resins (UP-R) Part 1: Designation system
EN ISO 2818:1996 PLASTICS - PREPARATION OF TEST SPECIMENS BY MACHINING
EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
ISO 75-2:2013 Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
ISO 11357-2:2013 Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height
ISO 1523:2002 Determination of flash point — Closed cup equilibrium method
EN ISO 75-2:2013 Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
ISO 4615:1979 Plastics Unsaturated polyesters and epoxide resins Determination of total chlorine content
IEC 60296:2012 RLV Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
EN ISO 3167:2014 Plastics - Multipurpose test specimens (ISO 3167:2014)
EN ISO 3521 : 1999 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997)
ISO 4630:2015 Clear liquids Estimation of colour by the Gardner colour scale
IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
ISO 2554:1997 Plastics — Unsaturated polyester resins — Determination of hydroxyl value
ISO 2577:2007 Plastics Thermosetting moulding materials Determination of shrinkage
ISO 1675:1985 Plastics — Liquid resins — Determination of density by the pyknometer method
IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
EN ISO 3219:1994 Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993)
ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
EN ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000)
ISO 604:2002 Plastics — Determination of compressive properties
ISO 179-1:2010 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
ISO 62:2008 Plastics Determination of water absorption
EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
EN ISO 2554 : 1999 PLASTICS - UNSATURATED POLYESTER RESINS - DETERMINATION OF HYSROXYL VALUE
EN 22719 : 1993 PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD
ISO 4589-2:2017 Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
ISO 2818:1994 Plastics — Preparation of test specimens by machining
ISO 4901:2011 Reinforced plastics based on unsaturated-polyester resins Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
ISO 760:1978 Determination of water Karl Fischer method (General method)
EN ISO 4615 : 1999 Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content (ISO 4615:1979)
ISO 178:2010 Plastics Determination of flexural properties
EN ISO 2535 : 2002 PLASTICS - UNSATURATED POLYESTER RESINS - MEASUREMENT OF GEL TIME AT AMBIENT TEMPERATURE (ISO 2535:2001)
ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles

View more information
US$170.10
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.