• There are no items in your cart

BS ISO 6194-4:2009

Current
Current

The latest, up-to-date edition.

Rotary shaft lip-type seals incorporating elastomeric sealing elements Performance test procedures
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

04-30-2009

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
  3.1 Terms and definitions
  3.2 Symbols
4 Pre-test procedure
5 Dynamic normal-temperature test
  5.1 Test apparatus
  5.2 Installation
  5.3 Test conditions
  5.4 Test procedure
  5.5 Post-test measurements
  5.6 Recording
  5.7 Acceptance criteria
6 Dynamic low-temperature test
  6.1 General
  6.2 Test apparatus
  6.3 Installation
  6.4 Test procedure
  6.5 Post-test measurements
  6.6 Recording
  6.7 Acceptance criteria
7 Material testing of elastomeric components
  7.1 Elastomeric material requirements
  7.2 Density
  7.3 Hardness
  7.4 Compression set
  7.5 Fluid immersion
  7.6 Dry-heat ageing in air
  7.7 Stiffness at low temperature
  7.8 Recording
8 Identification statement (Reference to this part of
  ISO 6194)
Annex A (informative) - Typical example of a seal test
        report for the dynamic test
Annex B (informative) - Typical example of a seal test
        report for the dynamic low-temperature test
Annex C (informative) - Typical example of an elastomeric
        material test report
Bibliography

Describes general test requirements for rotary shaft lip-type seals.

ISO6194 describes seals utilizing elastomeric sealing elements. They are considered suitable for use under low-pressure conditions (see ISO6194-1:2007, 6.1).

This part of ISO6194 specifies general test requirements for rotary shaft lip-type seals. The tests may be used for qualification purposes.

NOTE ISO6194 is complementary to ISO16589 which covers seals incorporating thermoplastic sealing elements.

Committee
MCE/11
DevelopmentNote
Supersedes 97/718034 DC and BS 7780-4(1995). (06/2005) Supersedes 07/30131694 DC. (04/2009)
DocumentType
Standard
Pages
28
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
ISO 6194-4:2009 Identical

DEFSTAN 08-107/3(2013) : 2013 GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT
DEFSTAN 02-339/2(2002) : INTERIM REQUIREMENTS FOR STEERING AND STABILIZER SYSTEMS FOR HM SURFACE SHIPS AND ROYAL FLEET AUXILIARIES
DEFSTAN 02-339/3(2006) : 2006 REQUIREMENTS FOR STEERING AND STABILIZER SYSTEMS FOR HM SURFACE SHIPS AND ROYAL FLEET AUXILIARIES

ISO 812:2017 Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness
ISO 1432:2013 Rubber, vulcanized or thermoplastic Determination of low-temperature stiffening (Gehman test)
ISO 2921:2011 Rubber, vulcanized Determination of low-temperature retraction (TR test)
ISO 5164:2014 Petroleum products Determination of knock characteristics of motor fuels Research method
ISO 6194-2:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 2: Vocabulary
ISO 4287:1997 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
ISO 815-2:2014 Rubber, vulcanized or thermoplastic Determination of compression set Part 2: At low temperatures
ISO 6194-1:2007 Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 1: Nominal dimensions and tolerances
ISO 5598:2008 Fluid power systems and components Vocabulary
ISO 16589-5:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 5: Identification of visual imperfections
ISO 815-1:2014 Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures
ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
ISO 16589-1:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal dimensions and tolerances
ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures
ISO 16589-3:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 3: Storage, handling and installation
ISO 5163:2014 Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method
ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 16589-2:2001 Rotary shaft lip-type seals incorporating thermoplastic sealing elements Part 2: Vocabulary
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids
ISO 2781:2008 Rubber, vulcanized or thermoplastic Determination of density

View more information
US$237.18
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.