• There are no items in your cart

PD 6697:2010

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2
Available format(s)

Hardcopy , PDF

Superseded date

07-19-2019

Language(s)

English

Published date

11-30-2010

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Materials and components
6 Design
7 Lintels: method of assessment of load
8 Work on site
Bibliography

This Published Document contains non-contradictory complementary information and additional guidance for use in the UK with BS EN 1996-1-1 and BS EN 1996-2.

This Published Document contains non-contradictory complementary information and additional guidance for use in the UK with BS EN 1996-1-1 and BS EN 1996-2.

BS EN 1996-1-2 and BS EN 1996-3 are not specifically dealt with, but this Published Document may be relevant.

Most of the material in this Published Document is taken from those parts of BS 5628-1, BS 5628-2, BS 5628-3 and BS 5977-2 that were not contradictory to the new BS EN 1996 series, but had to be withdrawn when those British Standards were withdrawn.

This Published Document does not cover the detailing of components for seismic design.

Committee
B/525/6
DevelopmentNote
Together with BS EN 1996-1-1, BS EN 1996-2 and BS EN 1996-3, it supersedes BS 5628-1(2005) and BS 5628-2(2005). Together with BS EN 1996-1-2, BS EN 1996-2 and BS EN 1996-3, it supersedes BS 5628-3(2005). Supersedes 10/30168896 DC. (11/2010)
DocumentType
Standard
Pages
108
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

BS EN 1996-1-1 NA : 2005 UK NATIONAL ANNEX TO EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES
BS 5502-22(2003) : 2003 BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 22: CODE OF PRACTICE FOR DESIGN, CONSTRUCTION AND LOADING
BS 8004:2015 Code of practice for foundations
BS 6093(2006) : 2006 DESIGN OF JOINTS AND JOINTING IN BUILDING CONSTRUCTION - GUIDE
BS 8002:2015 Code of practice for earth retaining structures
11/30214388 DC : 0 BS 8103-1 - STRUCTURAL DESIGN OF LOW-RISE BUILDINGS - PART 1: CODE OF PRACTICE FOR STABILITY, SITE INVESTIGATION, FOUNDATIONS AND GROUND FLOOR SLABS FOR HOUSING
BS 8103-1:2011 Structural design of low-rise buildings Code of practice for stability, site investigation, foundations, precast concrete floors and ground floor slabs for housing
13/30260276 DC : 0 BS 5642-2:1983+A1 - SILLS AND COPINGS - PART 2: SPECIFICATION FOR COPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE
12/30256518 DC : 0 BS EN 1996-1-1 - UK NATIONAL ANNEX TO EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES
BS 5642-2(1983) : 1983 SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE
12/30254626 DC : 0 PD 6693-1 - RECOMMENDATIONS FOR THE DESIGN OF STRUCTURES TO BS EN 1995 EUROCODE 5 FOR TIMBER STRUCTURES (REVISION OF BS 5268)
PD 6693-1:2012 Recommendations for the design of timber structures to Eurocode 5: Design of timber structures General. Common rules and rules for buildings
15/30301518 DC : 0 BS 8002 - CODE OF PRACTICE FOR EARTH RETAINING STRUCTURES
BS 8610:2017 Personal fall protection equipment. Anchor systems. Specification
BS EN 771-1 : 2011 SPECIFICATION FOR MASONRY UNITS - PART 1: CLAY MASONRY UNITS
BS EN 771-2 : 2011 SPECIFICATION FOR MASONRY UNITS - PART 2: CALCIUM SILICATE MASONRY UNITS
BS 8103-2:2013 Structural design of low-rise buildings Code of practice for masonry walls for housing
EN 771-2:2011+A1:2015 Specification for masonry units - Part 2: Calcium silicate masonry units
EN 771-1:2011+A1:2015 Specification for masonry units - Part 1: Clay masonry units
13/30262014 DC : 0 BS 8103-2 - STRUCTURAL DESIGN OF LOW RISE BUILDINGS - PART 2: CODE OF PRACTICE FOR MASONRY WALLS FOR HOUSING
13/30277948 DC : 0 BS 6093:2006+A1 - DESIGN OF JOINTS AND JOINTING IN BUILDING CONSTRUCTION - GUIDE
BS 5250(2011) : 2011 CODE OF PRACTICE FOR CONTROL OF CONDENSATION IN BUILDINGS

BS EN 13914-1:2016 Design, preparation and application of external rendering and internal plastering External rendering
BS EN 771-5 : 2011 SPECIFICATION FOR MASONRY UNITS - PART 5: MANUFACTURED STONE MASONRY UNITS
BS EN 1996-2 NA : 2006 UK NATIONAL ANNEX TO EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY
BS EN 998-2:2016 Specification for mortar for masonry Masonry mortar
BS EN 15287-1 : 2007 CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
BS 5977-2:1983 Lintels Specification for prefabricated lintels
BS EN 771-3 : 2011 SPECIFICATION FOR MASONRY UNITS - PART 3: AGGREGATE CONCRETE MASONRY UNITS (DENSE AND LIGHTWEIGHT AGGREGATES)
BS EN 1996-1-1 NA : 2005 UK NATIONAL ANNEX TO EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES
BS EN 13139:2013 Aggregates for mortar
BS EN 988:1997 Zinc and zinc alloys. Specification for rolled flat products for building
BS EN 13162 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
BS DD86-1(1983) : 1983 DAMP-PROOF COURSES - METHODS OF TEST FOR FLEXURAL BOND STRENGTH AND SHORT TERM SHEAR STRENGTH
BS EN 13167 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION
BS EN 1996-1-2:2005 Eurocode 6. Design of masonry structures General rules. Structural fire design
BS EN 845-2 : 2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
BS 1186-2:1988 Timber for and workmanship in joinery Specification for workmanship
BS EN 13164 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION
BS 4486:1980 Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete
BS DD86-2(1984) : 1984 DAMP-PROOF COURSES - METHOD OF TEST FOR CREEP DEFORMATION
BS EN ISO 11600 : 2003 BUILDING CONSTRUCTION - JOINTING PRODUCTS - CLASSIFICATION AND REQUIREMENTS FOR SEALANTS
BS EN 1052-4:2000 Methods of test for masonry Determination of shear strength including damp proof course
BS EN 934-3 : 2009 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING
BS EN 845-3 : 2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 3: BED JOINT REINFORCEMENT OF STEEL ESHWORK
BS 8104:1992 Code of practice for assessing exposure of walls to wind-driven rain
BS EN 206-1:2000 Concrete Specification, performance, production and conformity
BS EN 1052-1:1999 Methods of test for masonry Determination of compressive strength
BS 6515:1984 Specification for polyethylene damp-proof courses for masonry
BS EN 13165 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION
BS EN 1996-3:2006 Eurocode 6. Design of masonry structures Simplified calculation methods for unreinforced masonry structures
BS EN 1992-1-1 : 2004 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
BS EN 12620:2013 Aggregates for concrete
BS EN 459-1:2015 Building lime Definitions, specifications and conformity criteria
BS 493(1995) : 1995 SPECIFICATION FOR AIRBRICKS AND GRATINGS FOR WALL VENTILATION
BS 5642-1(1978) : 1978 SILLS, COPINGS AND CAPPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE
BS 5896:1980 Specification for high tensile steel wire and strand for the prestressing of concrete
BS EN 12588:2006 Lead and lead alloys. Rolled lead sheet for building purposes
BS EN 771-2 : 2011 SPECIFICATION FOR MASONRY UNITS - PART 2: CALCIUM SILICATE MASONRY UNITS
BS EN 197-1:2011 Cement Composition, specifications and conformity criteria for common cements
BS 7456:1991 Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems
BS 5617:1985 Specification for urea-formaldehyde (UF) foam systems suitable for thermal insulation of cavity walls with masonry or concrete inner and outer leaves
BS EN 1652:1998 Copper and copper alloys. Plate, sheet, strip and circles for general purposes
BS EN 1996-2:2006 Eurocode 6. Design of masonry structures Design considerations, selection of materials and execution of masonry
BS 8215:1991 Code of practice for design and installation of damp-proof courses in masonry construction
BS 4729(2005) : 2005 CLAY BRICKS OF SPECIAL SHAPES AND SIZES - RECOMMENDATIONS
BS EN 13163 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED POLYSTYRENE (EPS) PRODUCTS - SPECIFICATION
BS EN 1990 NA : 2002 + A1 : 2005 UK NATIONAL ANNEX FOR EUROCODE - BASIS OF STRUCTURAL DESIGN
BS EN 573-3:2013 Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products
BS 8000-16(1997) : 1997 WORKMANSHIP ON BUILDING SITES - PART 16: CODE OF PRACTICE FOR SEALING JOINTS IN BUILDINGS USING SEALANTS
BS EN 942:2007 Timber in joinery. General requirements
BS EN 490 : 2011 CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - PRODUCT SPECIFICATIONS
BS EN 1304:2013 Clay roofing tiles and fittings. Product definitions and specifications
BS EN 515:2017 Aluminium and aluminium alloys. Wrought products. Temper designations
BS EN 485-2:2013 Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties
BS 1186-3:1990 Timber for and workmanship in joinery Specification for wood trim and its fixing
BS 5642-2(1983) : 1983 SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE
BS 6398:1983 Specification for bitumen damp-proof courses for masonry
BS 743:1970 Specification for materials for damp-proof courses
BS EN 1996-1-1 : 2005 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES
BS EN 845-1 : 2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
BS EN 485-1 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
BS 6213(2000) : 2000 SELECTION OF CONSTRUCTION SEALANTS - GUIDE
BS EN 13166 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION
BS EN 1172:2011 Copper and copper alloys. Sheet and strip for building purposes
BS DD86-3(1990) : 1990 DAMP-PROOF COURSES - GUIDE TO CHARACTERISTIC STRENGTHS OF DAMP-PROOF COURSE MATERIAL USED IN MASONRY
BS EN 1990:2002+A1:2005 Eurocode. Basis of structural design
BS 5618:1985 Code of practice for thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with urea-formaldehyde (UF) foam systems
BS EN 14411:2012 Ceramic tiles. Definitions, classification, characteristics, evaluation of conformity and marking
BS EN 771-1 : 2011 SPECIFICATION FOR MASONRY UNITS - PART 1: CLAY MASONRY UNITS
BS EN 771-6 : 2011 SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS
BS 6925:1988 Specification for mastic asphalt for building and civil engineering (limestone aggregate)

View more information
US$356.96
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.