|
DIN EN ISO 2811-1:2016-08
|
Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
|
|
DIN EN 10202:2001-07
|
Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel; English version of DIN EN 10202
|
|
DIN 55350-18:1987-07
|
CONCEPTS IN QUALITY AND STATISTICS - CONCEPTS RELATING TO CERTIFICATES ON RESULTS OF QUALITY INSPECTIONS - QUALITY INSPECTION CERTIFICATES
|
|
DIN EN ISO 11890-2:2013-07
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
|
|
DIN 53150:2002-09
|
PAINTS AND VARNISHES - DETERMINATION OF THE DRYING STAGE OF COATINGS (MODIFIED BANDOW-WOLFF METHOD)
|
|
DIN EN ISO 11890-1:2007-09
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD
|
|
DIN 2003-2:1987-06
|
METAL PACKAGES - CANISTERS, CYLINDRICAL, NON-STACKABLE
|
|
DIN EN ISO 4623-2:2004-06
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 2: ALUMINIUM SUBSTRATES (ISO 4623-2:2016)
|
|
DIN EN ISO 1517:1995-06
|
PAINTS AND VARNISHES - SURFACE-DRYING TEST - BALLOTINI METHOD
|
|
DIN EN ISO 4628-2:2016-07
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 2: ASSESSMENT OF DEGREE OF BLISTERING (ISO 4628-2:2016)
|
|
DIN EN ISO 1524:2013-06
|
PAINTS, VARNISHES AND PRINTING INKS - DETERMINATION OF FINENESS OF GRIND (ISO 1524:2013)
|
|
DIN EN ISO 6272-1:2011-11
|
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
|
|
DIN EN ISO 2409:2013-06
|
PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013)
|
|
DIN 5033 : LATEST
|
|
|
DIN EN ISO 2431:2012-03
|
PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS (ISO 2431:2011)
|
|
DIN ISO 6133:2016-09 (Draft)
|
RUBBER AND PLASTICS - ANALYSIS OF MULTI-PEAK TRACES OBTAINED IN DETERMINATIONS OF TEAR STRENGTH AND ADHESION STRENGTH (ISO 6133:2015)
|
|
DIN 55996-2:2002-08
|
PAINTS AND VARNISHES - STONE CHIP RESISTANCE TEST FOR COATINGS - PART 2: SINGLE IMPACT TEST WITH CONDUCTED INDENTOR
|
|
DIN 53219:2009-08
|
PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER - METHOD BY DETERMINATION OF THE PRACTICAL DRY-FILM DENSITY
|
|
DIN EN ISO 2813:2015-02
|
PAINTS AND VARNISHES - DETERMINATION OF GLOSS VALUE AT 20 DEGREES, 60 DEGREES AND 85 DEGREES (ISO 2813:2014)
|
|
DIN EN ISO 4628-8:2013-03
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012)
|
|
DIN 50014:1985-07
|
CLIMATES AND THEIR TECHNICAL APPLICATION; STANDARD ATMOSPHERES
|
|
DIN EN ISO 4628-3:2016-07
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016); German version EN ISO 4628-3:2016
|
|
DIN EN ISO 4628-10:2016-07
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 10: ASSESSMENT OF DEGREE OF FILIFORM CORROSION (ISO 4628-10:2016)
|
|
DIN EN ISO 1518:2000-09
|
PAINTS AND VARNISHES - SCRATCH TEST
|
|
DIN EN 10205:1992-01
|
COLD REDUCED TIN-MILL PRODUCTS - BLACKPLATE
|
|
DIN 6174:2007-10
|
COLORIMETRIC EVALUATION OF COLOUR COORDINATES AND COLOUR DIFFERENCES ACCORDING TO THE APPROXIMATELY UNIFORM
|
