CEN/TR 14788:2006
Current
The latest, up-to-date edition.
03-15-2006
Foreword
1 Scope
2 References
3 Terms and definitions
4 Symbols and units
5 Need for ventilation in dwellings (residences)
6 Design assumptions for residential ventilation
7 Performance requirements for ventilation systems
8 Design rules for residential ventilation systems
9 Specification and documentation
Annex A (informative) Residential pollutant production rates
Annex B (informative) The relationship between humidity and
temperature and use of the psychrometric chart
Annex C (informative) Method of calculating water vapour
absorption effect
Annex D (informative) Residential ventilation systems and
their interaction with the dwelling
Annex E (informative) Calculation methods for ventilation
requirements
Annex F (informative) Examples of assumptions and resulting
calculated values for ventilation air flow rates
Annex G (informative) Noise
Annex H (informative) Nomograph for calculating air flow
rate to reduce the risk of surface condensation
occurring on the inner wall surface for various
wall U-values and ambient air conditions
Bibliography
This Technical Report specifies recommendations for the performance and design of ventilation systems which serve single family, multi family and apartment type dwellings during both summer and winter. It is of particular interest to architects, designers, builders and those involved with implementing national, regional and local regulations and standards.Four basic ventilation strategies are covered; natural ventilation, fan assisted supply air ventilation, fan assisted exhaust air ventilation and fan assisted balanced air ventilation. Combinations of these systems are not excluded and a ventilation system may serve only one dwelling (individual system) or more than one dwelling (central system). The ventilation aspects of combined systems (ventilation with heating and/or cooling) are covered.The ventilation of garages, common spaces, roof voids, sub-floor voids, wall cavities and other spaces in the structure, under, over or around the living space are not covered.Ventilation systems covered by this Technical Report may affect the entry and dilution of radon and other gases from the ground but these effects are not covered in this Technical Report. Ventilation systems designed to reduce the entry of radon and other gases from the ground are not covered by this Technical Report.
| Committee |
CEN/TC 156
|
| DocumentType |
Technical Report
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| I.S. CEN TR 14788:2006 | Identical |
| FD CEN/TR 14788 : 2006 FD | Identical |
| UNE-CEN/TR 14788:2007 IN | Identical |
| PD CEN/TR 14788:2006 | Identical |
| NEN NPR CEN/TR 14788 : 2006 | Identical |
| PKN CEN/TR 14788 : 2012 | Identical |
| DIN-Fachbericht CEN/TR 14788:2006-10 | Identical |
| DIN-Fachbericht CEN/TR 14788:2006-10 | Corresponds |
| I.S. EN 13779:2007 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| DIN EN 15251 E : 2012 | INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS |
| S.R. CEN/TR 16798-4:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 4: INTERPRETATION OF THE REQUIREMENTS IN EN 16798-3 - FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4) |
| EN 16798-3:2017 | Energy performance of buildings - Ventilation for buildings - Part 3: For non-residential buildings - Performance requirements for ventilation and room-conditioning systems (Modules M5-1, M5-4) |
| 15/30297468 DC : 0 | BS EN 16798-3 - ENERGY PERFORMANCE OF BUILDINGS - PART 3: VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| UNI TS 11300-1 : 2014 | ENERGY PERFORMANCE OF BUILDINGS - PART 1: EVALUATION OF ENERGY NEED FOR SPACE HEATING AND COOLING |
| PD CEN/TR 16798-4:2017 | Energy performance of buildings. Ventilation for buildings Interpretation of the requirements in EN 16798-3. For non-residential buildings. Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4) |
| DIN EN 15251:2012-12 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| DIN EN 16798-3 E : 2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 3: FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4) |
| BS ISO 17772-1:2017 | Energy performance of buildings. Indoor environmental quality Indoor environmental input parameters for the design and assessment of energy performance of buildings |
| UNI EN 13779 : 2008 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| CEN/TR 16798-4:2017 | Energy performance of buildings - Ventilation for buildings - Part 4: Interpretation of the requirements in EN 16798- 3 - For non-residential buildings - Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4) |
| BS EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| DIN EN 16798-3:2017-11 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 3: FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4) |
| BS EN 13779:2007 | Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| ISO 17772-1:2017 | Energy performance of buildings — Indoor environmental quality — Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings |
| I.S. EN 16798-3:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 3: FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4) |
| I.S. EN 15251:2007 | INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS |
| DIN EN 13779:2007-09 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| BS 5925:1991 | Code of practice for ventilation principles and designing for natural ventilation |
| EN 13465:2004 | Ventilation for buildings - Calculation methods for the determination of air flow rates in dwellings |
| ISO 9972:2015 | Thermal performance of buildings — Determination of air permeability of buildings — Fan pressurization method |
| ISO 140-10:1991 | Acoustics Measurement of sound insulation in buildings and of building elements Part 10: Laboratory measurement of airborne sound insulation of small building elements |
| EN 1507:2006 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
| ISO 140-3:1995 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements |
| ENV 1201997 : 1997 | VENTILATION FOR BUILDINGS - DUCTWORK - REQUIREMENTS FOR DUCTWORK COMPONENTS TO FACILITATE MAINTENANCE OF DUCTWORK SYSTEMS |
| ISO 10211-1:1995 | Thermal bridges in building construction Heat flows and surface temperatures Part 1: General calculation methods |
| EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
| EN 12237:2003 | Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts |
| EN ISO 140-3:1995/A1:2004 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: LABORATORY MEASUREMENTS OF AIRBORNE SOUND INSULATION OF BUILDING ELEMENTS |
| EN 13141-1:2004 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 1: Externally and internally mounted air transfer devices |
| EN 12236:2002 | Ventilation for buildings - Ductwork hangers and supports - Requirements for strength |
| EN ISO 10211-1 : 95 COR 2002 | THERMAL BRIDGES IN BUILDING CONSTRUCTION - CALCULATION OF HEAT FLOWS AND SURFACE TEMPERATURES - PART 1: GENERAL METHODS |
| EN 14134:2004 | Ventilation for buildings - Performance testing and installation checks of residential ventilation systems |
| EN 20140-10 : 1992 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 10: LABORATORY MEASUREMENT OF AIRBORNE SOUND INSULATION OF SMALL BUILDING ELEMENTS |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.