Name: CEN/TS 13649:2014
Brand: CEN

Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption

Published date

12-03-2014

Publisher

Comite Europeen de Normalisation

This Technical Specification specifies procedures for the sampling, preparation and analysis of individual volatile organic compounds (VOCs) in waste gas, such as those arising from solvent using processes. Sampling occurs by adsorption on sorbents, preparation by solvent extraction or thermodesorption and analysis by gas chromatography.Examples of individual VOC are given in relevant industry sector BAT Reference documents (BREFs).The results obtained are expressed as the mass concentration (mg/m3) of the individual gaseous organic compounds. This document is suitable for measuring individual VOCs whose ranges vary depending on compound and test method, refer to Annex B and C.This Technical Specification may be used to meet the monitoring requirements of the Industrial Emission Directive (IED) and associated supporting documents.This Technical Specification is not suitable for measuring total organic carbon (TOC). For the measurement of the mass concentration of total organic carbon then EN 12619 [3] is applicable.

Committee	CEN/TC 264
DevelopmentNote	Supersedes EN 13649 & PREN 13649. (12/2014)
DocumentType	Technical Specification
PublisherName	Comite Europeen de Normalisation
Status	Current
Supersedes	EN 13649:2001 PREN 13649 : DRAFT 2011

Standards	Relationship
UNE-CEN/TS 13649:2014	Identical
DIN CEN/TS 13649;DIN SPEC 33969:2015-03	Identical
DIN CEN/TS 13649; DIN SPEC 33969:2015-03	Identical
UNI CEN/TS 13649 : 2015	Identical
PD CEN/TS 13649:2014	Identical
S.R. CEN/TS 13649:2014	Identical
XP CEN/TS 13649 : 2015 XP	Identical
NEN NPR CEN/TS 13649 : 2014	Identical

VDI 3461:2016-09 (Draft)	Emission control - Thermochemical gasification of biomass in cogeneration
VDI 2441:2016-05	Process gas and waste gas cleaning by cold plasma - Barrier discharge, corona discharge, UV radiation
VDI 3477:2016-03	Biological waste gas purification - Biofilters

ASTM D 3686 : 2013 : REDLINE	Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
CEN/TS 14793:2005	Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method
ISO 14956:2002	Air quality Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
EN ISO 16017-1:2000	Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000)
EN 1076:2009	Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
ISO 16017-1:2000	Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography — Part 1: Pumped sampling
EN 15259:2007	Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report
EN 12619:2013	Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
EN ISO 14956 : 2002	AIR QUALITY - EVALUATION OF THE SUITABILITY OF A MEASUREMENT PROCEDURE BY COMPARISON WITH A REQUIRED MEASUREMENT UNCERTAINTY
ISO 16000-6:2011	Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID
ISO/IEC Guide 98-3:2008	Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)